View source for Chemistry:Kinetic isotope effect

{{short description|Change in chemical reaction rate due to isotopic substitution}}
{{image frame|width=500
|content=<math chem>
\begin{matrix}\\
\ce{ {CN^-} + {^{12}CH3-Br} ->[k_{12}] {^{12}CH3-CN} + Br^-}\\
\ce{ {CN^-} + {^{13}CH3-Br} ->[k_{13}] {^{13}CH3-CN} + Br^-}\\{}
\end{matrix}
\qquad
\text{KIE}=\frac{k_{12}}{k_{13}} = 1.082 \pm 0.008
</math>
|caption='''An example of the kinetic isotope effect.'''<br />In the reaction of methyl bromide with [[Chemistry:Cyanide|cyanide]],<br />the kinetic isotope effect of the carbon in the [[Chemistry:Methyl group|methyl group]] was found to be 1.082 ± 0.008.<ref name="Westaway1" /><ref>{{cite journal| vauthors = Lynn KR, Yankwich PE |title=Isotope Fractionation at the Methyl Carbon in the Reactions of Cyanide Ion with Methyl Chloride and Methyl Bromide |journal=Journal of the American Chemical Society|date=5 August 1961|volume=83|issue=15|pages=3220–3223|doi=10.1021/ja01476a012}}</ref>}}
In [[Chemistry:Physical organic chemistry|physical organic chemistry]], a '''kinetic isotope effect''' ('''KIE''') is the change in the [[Physics:Reaction rate|reaction rate]] of a [[Chemistry:Chemical reaction|chemical reaction]] when one of the [[Physics:Atom|atom]]s in the reactants is replaced by one of its [[Physics:Isotope|isotope]]s.<ref name=Atkins /> Formally, it is the ratio of rate constants for the reactions involving the light (''k<sub>L</sub>'') and the heavy (''k<sub>H</sub>'') isotopically substituted reactants (isotopologues):

:<math>\text{KIE}=\frac{k_L}{k_H}</math>

This change in reaction rate is a quantum mechanical effect that primarily results from heavier [[Physics:Isotopologue|isotopologue]]s having lower [[Physics:Molecular vibration|vibrational]] frequencies compared to their lighter counterparts. In most cases, this implies a greater energetic input needed for heavier isotopologues to reach the [[Chemistry:Transition state|transition state]] (or, in rare cases, the [[Physics:Bond-dissociation energy|dissociation limit]]), and consequently, a slower reaction rate.  The study of kinetic isotope effects can help the elucidation of the [[Physics:Reaction mechanism|reaction mechanism]] of certain chemical reactions and is occasionally exploited in drug development to improve unfavorable [[Medicine:Pharmacokinetics|pharmacokinetics]] by protecting metabolically vulnerable C-H bonds.

== Background ==

The kinetic isotope effect is considered to be one of the most essential and sensitive tools for the study of [[Physics:Reaction mechanism|reaction mechanism]]s, the knowledge of which allows the improvement of the desirable qualities of the corresponding reactions. For example, kinetic isotope effects can be used to reveal whether a [[Chemistry:Nucleophilic substitution|nucleophilic substitution]] reaction follows a unimolecular (S<sub>N</sub>1) or bimolecular (S<sub>N</sub>2) pathway.

In the reaction of methyl bromide and [[Chemistry:Cyanide|cyanide]] (shown in the introduction), the observed methyl carbon kinetic isotope effect indicates an S<sub>N</sub>2 mechanism.<ref name="Westaway1">{{cite journal|last=Westaway|first=Kenneth C. | name-list-style = vanc |title=Using kinetic isotope effects to determine the structure of the transition states of S<sub>N</sub>2 reactions|journal=Advances in Physical Organic Chemistry|year=2006|volume=41|pages=217–273|doi=10.1016/S0065-3160(06)41004-2|isbn=978-0-12-033541-1 }}</ref> Depending on the pathway, different strategies may be used to stabilize the [[Chemistry:Transition state|transition state]] of the [[Chemistry:Rate-determining step|rate-determining step]] of the reaction and improve the [[Physics:Reaction rate|reaction rate]] and selectivity, which are important for industrial applications.

[[File:Kinetic isotope effect (reaction mechanism) (2).png|center]]

Isotopic rate changes are most pronounced when the relative [[Physics:Mass|mass]] change is greatest, since the effect is related to vibrational frequencies of the affected bonds. For instance, changing a [[Chemistry:Hydrogen|hydrogen]] atom (H) to its isotope [[Physics:Deuterium|deuterium]] (D) represents a 100% increase in mass, whereas in replacing [[Chemistry:Carbon|carbon]]-12 with carbon-13, the mass increases by only 8 percent. The rate of a reaction involving a C–H bond is typically 6–10 times faster than the corresponding C–D bond, whereas a <sup>12</sup>C reaction is only 4 percent faster than the corresponding <sup>13</sup>C reaction<ref name="Laidler_1987" />{{rp|445}} (even though, in both cases, the isotope is one atomic mass unit heavier).

Isotopic substitution can modify the rate of reaction in a variety of ways. In many cases, the rate difference can be rationalized by noting that the mass of an atom affects the [[Physics:Molecular vibration|vibrational frequency]] of the [[Chemistry:Chemical bond|chemical bond]] that it forms, even if the [[Physics:Potential energy surface|potential energy surface]] for the reaction is nearly identical. Heavier isotopes will ([[Physics:Classical physics|classically]]) lead to lower vibration frequencies, or, viewed [[Physics:Quantum mechanics|quantum mechanically]], will have lower [[Physics:Zero-point energy#The uncertainty principle|zero-point energy]]. With a lower zero-point energy, more energy must be supplied to break the bond, resulting in a higher [[Chemistry:Activation energy|activation energy]] for bond cleavage, which in turn lowers the measured rate (see, for example, the [[Arrhenius equation]]).<ref name="Atkins" /><ref name="Laidler_1987" />{{rp|427}}

== Classification ==

=== Primary kinetic isotope effects ===
A '''primary kinetic isotope effect''' may be found when a bond to the isotopically labeled atom is being formed or broken.<ref name="Atkins" /><ref name="Laidler_1987" />{{rp|427}} Depending on the way a kinetic isotope effect is probed (parallel measurement of rates ''vs.'' intermolecular competition ''vs.'' intramolecular competition), the observation of a primary kinetic isotope effect is indicative of breaking/forming a bond to the isotope at the rate-limiting step, or subsequent product-determining step(s).  (The misconception that a primary kinetic isotope effect must reflect bond cleavage/formation to the isotope at the rate-limiting step is frequently repeated in textbooks and the primary literature: ''see the section on [[Chemistry:Kinetic isotope effect#Experiments|experiments]] below.'')<ref name="Simmons_2012" />

For the previously mentioned nucleophilic substitution reactions, primary kinetic isotope effects have been investigated for both the leaving groups, the nucleophiles, and the α-carbon at which the substitution occurs. Interpretation of the leaving group kinetic isotope effects had been difficult at first due to significant contributions from temperature independent factors. Kinetic isotope effects at the α-carbon can be used to develop some understanding into the symmetry of the transition state in S<sub>N</sub>2 reactions, although this kinetic isotope effect is less sensitive than what would be ideal, also due to contribution from non-vibrational factors.<ref name="Westaway1" />

=== Secondary kinetic isotope effects ===
A '''secondary kinetic isotope effect''' is observed when no bond to the isotopically labeled atom in the reactant is broken or formed.<ref name="Atkins" /><ref name="Laidler_1987" />{{rp|427}} Secondary kinetic isotope effects tend to be much smaller than primary kinetic isotope effects; however, secondary deuterium isotope effects can be as large as 1.4 per deuterium atom, and techniques have been developed to measure heavy-element isotope effects to very high precision, so secondary kinetic isotope effects are still very useful for elucidating reaction mechanisms.

For the aforementioned nucleophilic substitution reactions, secondary hydrogen kinetic isotope effects at the α-carbon provide a direct means to distinguish between S<sub>N</sub>1 and S<sub>N</sub>2 reactions. It has been found that S<sub>N</sub>1 reactions typically lead to large secondary kinetic isotope effects, approaching to their theoretical maximum at about 1.22, while S<sub>N</sub>2 reactions typically yield secondary kinetic isotope effects that are very close to or less than unity. Kinetic isotope effects that are greater than 1 are referred to as '''normal kinetic isotope effects''', while kinetic isotope effects that are less than one are referred to as '''inverse kinetic isotope effects'''. In general, smaller force constants in the transition state are expected to yield a normal kinetic isotope effect, and larger force constants in the transition state are expected to yield an inverse kinetic isotope effect when stretching vibrational contributions dominate the kinetic isotope effect.<ref name="Westaway1" />

[[File:SN1 vs SN2.png|center]]

The magnitudes of such secondary isotope effects at the α-carbon atom are largely determined by the C<sub>α</sub>-H(D) vibrations. For an S<sub>N</sub>1 reaction, since the carbon atom is converted into an sp<sup>2</sup> hybridized carbenium ion during the transition state for the rate-determining step with an increase in C<sub>α</sub>-H(D) bond order, an inverse kinetic isotope effect would be expected if only the stretching vibrations were important. The observed large normal kinetic isotope effects are found to be caused by significant out-of-plane bending vibrational contributions when going from the reactants to the transition state of carbenium ion formation. For S<sub>N</sub>2 reactions, bending vibrations still play an important role for the kinetic isotope effect, but stretching vibrational contributions are of more comparable magnitude, and the resulting kinetic isotope effect may be normal or inverse depending on the specific contributions of the respective vibrations.<ref name="Westaway1" /><ref>{{cite journal| vauthors = Poirier RA, Wang Y, Westaway KC |title=A Theoretical Study of the Relationship between Secondary .alpha.-Deuterium Kinetic Isotope Effects and the Structure of S<sub>N</sub>2 Transition States|journal=Journal of the American Chemical Society|date=March 1994|volume=116|issue=6|pages=2526–2533|doi=10.1021/ja00085a037}}</ref><ref name=Buncel5>{{cite book | vauthors = Buncel E, Lee CC | series = Isotopes in Organic Chemistry | title = Isotopes in cationic reactions | publisher = Elsevier | location = Amsterdam | year = 1977 | volume = 5 | isbn = 978-0-444-41927-9 | oclc = 867217247 | url-access = registration | url = https://archive.org/details/isotopesincation0005unse }}</ref>

== Theory ==
The theoretical treatment of isotope effects relies heavily on [[Chemistry:Transition state theory|transition state theory]], which assumes a single potential energy surface for the reaction, and a barrier between the reactants and the products on this surface, on top of which resides the transition state.<ref name=Saunders>{{cite book | vauthors = Melander L, Saunders WH | title = Reaction Rates of Isotopic Molecules | publisher = Wiley | location = New York | date = 1980 }}</ref><ref>{{cite journal | vauthors = Bigeleisen J, Wolfsberg M | title = Theoretical and experimental aspects of isotope effects in chemical kinetics. | journal = Advances in Chemical Physics | date = January 1957  | volume = 1 | pages = 15–76 }}</ref> The kinetic isotope effect arises largely from the changes to vibrational ground states produced by the isotopic perturbation along the minimum energy pathway of the potential energy surface, which may only be accounted for with quantum mechanical treatments of the system. Depending on the mass of the atom that moves along the reaction coordinate and nature (width and height) of the energy barrier, [[Physics:Quantum tunnelling|quantum mechanical tunneling]] may also make a large contribution to an observed kinetic isotope effect and may need to be separately considered, in addition to the "semi-classical" transition state theory model.<ref name="Saunders" />

The deuterium kinetic isotope effect (<sup>2</sup>H KIE) is by far the most common, useful, and well-understood type of kinetic isotope effect.  The accurate prediction of the numerical value of a deuterium kinetic isotope effect using density functional theory calculations is now relatively routine.  Moreover, several qualitative and semi-quantitative models allow rough estimates of deuterium isotope effects to be made without calculations, often providing enough information to rationalize experimental data or even support or refute different mechanistic possibilities.  Starting materials containing deuterium are often commercially available, making the synthesis of isotopically enriched starting materials relatively straightforward.  Also, due to the large relative difference in the mass of deuterium and protium and the attendant differences in vibrational frequencies, the magnitude of the isotope effect is larger than any other pair of isotopes except protium and tritium,<ref>If [[Physics:Muonium|muonium]] (μ<sup>+</sup>e<sup>–</sup>) is treated as an isotope of hydrogen, then even larger KIEs are possible, in principle.  However, studies involving muonium are limited by the short half-life of the muon (22 microseconds) (see {{cite journal | vauthors = Villà J, Corchado JC, González-Lafont A, Lluch JM, Truhlar DG | title = Explanation of deuterium and muonium kinetic isotope effects for hydrogen atom addition to an olefin. | journal = Journal of the American Chemical Society | date = November 1998 | volume = 120 | issue = 46 | pages = 12141–2 | doi = 10.1021/ja982616i }} for an example of a ''k''<sub>Mu</sub>/''k''<sub>H</sub> isotope effect.)</ref> allowing both primary and secondary isotope effects to be easily measured and interpreted.  In contrast, secondary effects are generally very small for heavier elements and close in magnitude to the experimental uncertainty, which complicates their interpretation and limits their utility. In the context of isotope effects, ''hydrogen'' is frequently used to refer to the light isotope, protium (<sup>1</sup>H), specifically.  In the rest of this article, reference to ''hydrogen'' and ''deuterium'' in parallel grammatical constructions or direct comparisons between them should be interpreted as referring to protium and deuterium.<ref>This convention exists for both convenience in nomenclature and as a reflection of how deuterium kinetic isotope effects are generally studied experimentally:  Although deuterium has the IUPAC-sanctioned symbol D = <sup>2</sup>H, there is no common symbol that specifically refers to protium (<sup>1</sup>H).  Nevertheless, it has proven useful to have labels to refer to the respective rate constants of protium- or deuterium-containing isotopologues, so ''k''<sub>H</sub> and ''k''<sub>D</sub>, respectively, have typically been used. Moreover, the magnitude of a kinetic isotope effect could then be expressed as ''k''<sub>H</sub>/''k''<sub>D</sub>.  This notation is consistent with the fact that, experimentally, deuterium kinetic isotope effects are measured by comparing the reaction rate of a deuterium-enriched starting material to that of an unenriched starting material containing hydrogen at natural abundance.  This is almost always valid, since protium accounts for 99.9885% of natural hydrogen, so there is generally no need to further deplete the deuterium in the starting material to obtain a "protium-enriched" sample.  Combined, the notation and experimental setup led to the common conceptualization of deuterium as a "substituent" that takes the place of "regular" hydrogen in an isotope effect study.</ref>

The theory of kinetic isotope effects was first formulated by [[Biography:Jacob Bigeleisen|Jacob Bigeleisen]] in 1949.<ref>{{cite journal|last=Bigeleisen|first=Jacob | name-list-style = vanc |title=The Relative Reaction Velocities of Isotopic Molecules|journal=Journal of Chemical Physics|date=August 1949|volume=17|issue=8|pages=675–678|doi=10.1063/1.1747368|bibcode=1949JChPh..17..675B}}</ref><ref name="Laidler_1987">{{cite book | vauthors = Laidler KJ | title = Chemical Kinetics | edition = 3rd | publisher = Harper & Row | date = 1987 | isbn = 978-0-06-043862-3 }}</ref>{{rp|427}} Bigeleisen's general formula for deuterium kinetic isotope effects (which is also applicable to heavier elements) is given below. It employs transition state theory and a statistical mechanical treatment of translational, rotational, and vibrational levels for the calculation of rate constants ''k''<sub>H</sub> and ''k''<sub>D</sub>.  However, this formula is "semi-classical" in that it neglects the contribution from quantum tunneling, which is often introduced as a separate correction factor.  Bigeleisen's formula also does not deal with differences in non-bonded repulsive interactions caused by the slightly shorter C–D bond compared to a C–H bond.  In the equation, quantities with the subscripts H or D refer to the hydrogen- or deuterium-substituted species, respectively, while quantities with or without the double-dagger, ‡, refer to the transition state or reactant ground state, respectively.<ref name="Buncel5" /><ref name=":4">{{Cite book | title = Mechanism and theory in organic chemistry | first1 = Thomas H | last1 = Lowry | first2 = Kathleen Schueller | last2 = Richardson | name-list-style = vanc | date = 1987 | publisher = Harper & Row | isbn = 978-0-06-044084-8 | edition = 3rd | location = New York | pages = [https://archive.org/details/mechanismtheoryi000321/page/256 256] | oclc = 14214254 | url-access = registration | url = https://archive.org/details/mechanismtheoryi000321/page/256 }}</ref> (Strictly speaking, a <math>
\kappa_\mathrm{H}/\kappa_{\mathrm{D}}
</math> term resulting from an isotopic difference in transmission coefficients should also be included.<ref>{{Cite book |title=Determination of organic reaction mechanisms| first =  Barry Keith | last = Carpenter | name-list-style = vanc |date=1984|publisher=Wiley |isbn=978-0-471-89369-1 |location=New York |pages=86 |oclc=9894996 }}</ref>)

:<math chem="">
\frac{k_\ce{H}}{k_\ce{D}} = \left(\frac{\sigma_\ce{H} \sigma^\ddagger_\ce{D}}{\sigma_\ce{D} \sigma^\ddagger_\ce{H}} \right) \left(\frac{M^\ddagger_\ce{H} M_\ce{D}}{M^\ddagger_\ce{D} M_\ce{H}}\right)^{\frac 3 2}\left(\frac{I^\ddagger_{x\ce{H}}I^\ddagger_{y\ce{H}}I^\ddagger_{z\ce{H}}}{I^\ddagger_{x\ce{D}}I^\ddagger_{y\ce{D}}I^\ddagger_{z\ce{D}}}\frac{I_{x\ce{D}}I_{y\ce{D}}I_{z\ce{D}}}{I_{x\ce{H}}I_{y\ce{H}}I_{z\ce{H}}}\right)^{\frac 1 2}
 \left(\frac{\prod\limits_{i=1}^{3N^\ddagger -7}\frac{1-e^{-u^\ddagger_{i\ce{D}}}}{1-e^{-u^\ddagger_{i\ce{H}}}}}{\prod\limits_{i=1}^{3N -6}\frac{1-e^{-u_{i\ce{D}}}}{1-e^{-u_{i\ce{H}}}}} \right) e^{-\frac 1 2 \left[\sum\limits_{i=1}^{3N^\ddagger-7}(u^\ddagger_{i\ce{H}}-u^\ddagger_{i\ce{D}})-\sum\limits_{i=1}^{3N-6}(u_{i\ce{H}}-u_{i\ce{D}})\right]}
</math>,

where we define

:<math chem="">
u_i:= \frac{h\nu_i}{k_\mathrm{B}T} =
\frac{hcN_\mathrm{A}\tilde{\nu}_i}{RT}
</math> and <math chem="">
u_i^\ddagger:= \frac{h\nu_i^\ddagger}{k_\mathrm{B}T} =
\frac{hcN_\mathrm{A}\tilde{\nu}_i^\ddagger}{RT}
</math>.

Here, ''h'' is the [[Physics:Planck constant|Planck constant]], ''k''<sub>B</sub> is the [[Physics:Boltzmann constant|Boltzmann constant]], <math>\tilde{\nu}_i</math> is the frequency of the vibration, expressed in [[Physics:Wavenumber|wavenumber]]s, ''c'' is the [[Physics:Speed of light|speed of light]], ''N''<sub>A</sub> is the [[Physics:Avogadro constant|Avogadro constant]], and ''R'' is the universal gas constant.  The σ<sub>X</sub> (X = H or D) are the symmetry numbers for the reactants and transition states. The ''M''<sub>X</sub> are the molecular masses of the corresponding species, and the ''I<sub>q</sub>''<sub>X</sub> (''q'' = ''x'', ''y'', or ''z'') terms are the moments of inertia about the three principal axes. The ''u<sub>i</sub>''<sub>X</sub> are directly proportional to the corresponding vibrational frequencies, ''ν<sub>i</sub>'', and the vibrational [[Physics:Zero-point energy|zero-point energy]] (see below).  The integers ''N'' and ''N''<sup>‡</sup> are the number of atoms in the reactants and the transition states, respectively.<ref name="Buncel5" /> The complicated expression given above can be represented as the product of four separate factors:<ref name="Buncel5" />

:<math chem="">\frac{k_\ce{H}}{k_\ce{D}} = \mathbf{S} \times \mathbf{MMI} \times \mathbf{EXC} \times \mathbf{ZPE}</math>.

For the special case of deuterium isotope effects, we will argue that the first three terms can be treated as equal to or well approximated by unity.  The first factor '''S''' (containing the σ<sub>X</sub>) is the ratio of the symmetry numbers for the various species.  This will be a rational number (a ratio of integers) that depends on the number of molecular and bond rotations leading to the permutation of identical atoms or groups in the reactants and the transition state.<ref name=":4" /> For systems of low symmetry, all σ<sub>X</sub> (reactant and transition state) will be unity; thus '''S''' can often be neglected. The '''MMI''' factor (containing the ''M''<sub>X</sub> and ''I<sub>q</sub>''<sub>X</sub>) refers to the ratio of the molecular masses and the moments of inertia. Since hydrogen and deuterium tend to be much lighter compared to most reactants and transition states, there is little difference in the molecular masses and moments of inertia between H and D containing molecules, so the '''MMI''' factor is usually also approximated as unity. The '''EXC''' factor (containing the product of vibrational [[Physics:Partition function (statistical mechanics)|partition functions]]) corrects for the kinetic isotope effect caused by the reactions of vibrationally excited molecules. The fraction of molecules with enough energy to have excited state A–H/D bond vibrations is generally small for reactions at or near room temperature (bonds to hydrogen usually vibrate at 1000&nbsp;cm<sup>−1</sup> or higher, so exp(-''u<sub>i</sub>'') = exp(-''hν<sub>i</sub>''/''k''<sub>B</sub>''T'') < 0.01 at 298 K, resulting in negligible contributions from the 1–exp(-''u<sub>i</sub>'') factors). Hence, for hydrogen/deuterium kinetic isotope effects, the observed values are typically dominated by the last factor, '''ZPE''' (an exponential function of vibrational zero-point energy differences), consisting of contributions from the zero-point energy differences for each of the vibrational modes of the reactants and transition state, which can be represented as follows:<ref name="Buncel5" />

:<math chem="">\begin{align}
\frac{k_\ce{H}}{k_\ce{D}} &\cong \exp\left\{-\frac 1 2\left[\sum\limits_{i=1}^{3N^\ddagger-7}(u^\ddagger_{i\ce{H}}-u^\ddagger_{i\ce{D}})-\sum\limits_{i=1}^{3N-6}(u_{i\ce{H}}-u_{i\ce{D}})\right]\right\}
\\ &\cong \exp\left[\sum_{i}^{\mathrm{(react.)}}\frac{1}{2}\Delta u_i-\sum_i^{\mathrm{(TS)}}\frac{1}{2}\Delta u_i^\ddagger\right]
\end{align}</math>,

where we define

:<math>\Delta u_i := u_{i\mathrm{H}}-u_{i\mathrm{D}}</math> and <math>\Delta u_i^\ddagger := u_{i\mathrm{H}}^\ddagger-u_{i\mathrm{D}}^\ddagger</math>.

The sums in the exponent of the second expression can be interpreted as running over all vibrational modes of the reactant ground state and the transition state. Alternatively, one may interpret them as running over those modes unique to the reactant or the transition state or whose vibrational frequencies change substantially upon advancing along the reaction coordinate.  The remaining pairs of reactant and transition state vibrational modes have very similar <math>\Delta u_i</math>and <math>\Delta u_i^\ddagger</math>, and cancellations occur when the sums in the exponent are calculated.  Thus, in practice, deuterium KIEs are often largely dependent on a handful of key vibrational modes because of this cancellation, making qualitative analyses of ''k''<sub>H</sub>/''k''<sub>D</sub> possible.<ref name=":4" />

As mentioned, especially for hydrogen/deuterium substitution, most kinetic isotope effects arise from the difference in [[Physics:Zero-point energy|zero-point energy]] (ZPE) between the reactants and the transition state of the isotopologues in question, and this difference can be understood qualitatively with the following description: within the [[Physics:Born–Oppenheimer approximation|Born–Oppenheimer approximation]], the potential energy surface is the same for both isotopic species. However, a quantum-mechanical treatment of the energy introduces discrete vibrational levels onto this curve, and the lowest possible energy state of a molecule corresponds to the lowest vibrational energy level, which is slightly higher in energy than the minimum of the potential energy curve. This difference, referred to as the zero-point energy, is a manifestation of the Heisenberg uncertainty principle that necessitates an uncertainty in the C-H or C-D bond length. Since the heavier (in this case the deuterated) species behaves more "classically," its vibrational energy levels are closer to the classical potential energy curve, and it has a lower zero-point energy. The zero-point energy differences between the two isotopic species, at least in most cases, diminish in the transition state, since the bond force constant decreases during bond breaking. Hence, the lower zero-point energy of the deuterated species translates into a larger activation energy for its reaction, as shown in the following figure, leading to a normal kinetic isotope effect.<ref name="pmid21124393">{{cite journal | vauthors = Carpenter BK | title = Kinetic isotope effects: unearthing the unconventional | journal = Nature Chemistry | volume = 2 | issue = 2 | pages = 80–2 | date = February 2010 | pmid = 21124393 | doi = 10.1038/nchem.531 | bibcode = 2010NatCh...2...80C }}</ref> This effect should, in principle, be taken into account all 3''N−''6 vibrational modes for the starting material and 3''N''<sup>‡</sup>''−''7 vibrational modes at the transition state (one mode, the one corresponding to the reaction coordinate, is missing at the transition state, since a bond breaks and there is no restorative force against the motion).  The [[Physics:Harmonic oscillator|harmonic oscillator]] is a good approximation for a vibrating bond, at least for low-energy vibrational states.  Quantum mechanics gives the vibrational zero-point energy as <math>
\epsilon_i^{(0)}=\frac{1}{2}h\nu_i
</math>.  Thus, we can readily interpret the factor of ½ and the sums of <math>
u_i = h\nu_i/k_\mathrm{B}T
</math> terms over ground state and transition state vibrational modes in the exponent of the simplified formula above.  For a harmonic oscillator, the vibrational frequency is inversely proportional to the square root of the reduced mass of the vibrating system:

:<math>
\nu_{\mathrm{X}}=\frac{1}{2\pi }\sqrt{\frac{k_\mathrm{f}}{\mu_\mathrm{X}}}\cong
\frac{1}{2\pi }\sqrt{\frac{k_\mathrm{f}}{m_\mathrm{X}}}
</math>,

where ''k''<sub>f</sub> is the [[Physics:Hooke's law|force constant]].  Moreover, the reduced mass is approximated by the mass of the light atom of the system, X = H or D.  Because ''m''<sub>D</sub> is approximately 2''m''<sub>H</sub>,

:<math>
\Delta u_i \cong \left(1-\frac{1}{\sqrt 2}\right)\frac{h\nu_{i\mathrm{H}}}{k_\mathrm{B}T}
</math>.

In the case of a homolytic C–H/D bond dissociation, the transition state term disappears, and neglecting other vibrational modes, ''k''<sub>H</sub>/''k''<sub>D</sub> = exp(½Δ''u<sub>i</sub>'').  Thus, a larger isotope effect is observed for a stiffer ("stronger") C–H/D bond.  For most reactions of interest, a hydrogen atom is transferred between two atoms, with a transition-state [A···H···B]<sup>‡</sup> and vibrational modes at the transition state need to be accounted for.  Nevertheless, it is still generally true that cleavage of a bond with a higher vibrational frequency will give a larger isotope effect.[[File:C-H and C-D bond breaking.png|thumb|center|500px|ZPE energy differences and corresponding differences in the activation energies for the breaking of analogous C-H and C-D bonds.  Note that in this schematic diagram, the curves actually represents (3''N-''6)- and (3''N''<sup>‡</sup>-7)-dimensional hypersurfaces, and that the vibrational mode whose ZPE is illustrated at the transition state is ''not'' the same one as the reaction coordinate.  The reaction coordinate represents a vibration with a negative force constant (and imaginary vibrational frequency) for the transition state.  The ZPE shown for the ground state ''may'' refer to the vibration corresponding to the reaction coordinate in the case of a primary KIE.]]

To calculate the maximum possible value for a non-tunneling deuterium KIE, we consider the case in which the zero-point energy difference between the stretching vibrations of a typical carbon-hydrogen bond (3000&nbsp;cm<sup>−1</sup>) and carbon-deuterium bond (2200&nbsp;cm<sup>−1</sup>) disappears in the transition state (an energy difference of (1/2)(3000 – 2200&nbsp;cm<sup>−1</sup>) = 400&nbsp;cm<sup>−1</sup>, or about 1.15 kcal/mol), without any compensation from a zero-point energy difference at the transition state (e.g., from the symmetric A···H···B stretch, which is unique to the transition state).  The simplified formula given above predicts a maximum for ''k''<sub>H</sub>/''k''<sub>D</sub> as 6.9. If the complete disappearance of two bending vibrations is also included, ''k''<sub>H</sub>/''k''<sub>D</sub> values as large as 15-20 can be predicted. Bending frequencies are very unlikely to vanish in the transition state, however, and there are only a few cases in which ''k''<sub>H</sub>/''k''<sub>D</sub> values exceed 7-8 near room temperature. Furthermore, it is often found that tunneling is a major factor when they do exceed such values. A value of ''k''<sub>H</sub>/''k''<sub>D</sub> ~ 10 is thought to be maximal for a semi-classical primary kinetic isotope effect (no tunneling) for reactions taking place around 298 K.  (The formula for ''k''<sub>H</sub>/''k''<sub>D</sub> has a temperature dependence, so larger isotope effects are possible at lower temperatures).<ref>{{Cite book |title=Perspectives on structure and mechanism in organic chemistry | first = Felix A | last = Carroll | name-list-style = vanc |date=2010|publisher=John Wiley|isbn=978-0-470-27610-5 |edition=2nd|location=Hoboken, N.J.|oclc=286483846}}</ref> Depending on the nature of the transition state of H-transfer (symmetrical vs. "early" or "late" and linear vs. bent), the extent to which a primary deuterium isotope effect approaches this maximum varies.  A model developed by Westheimer predicted that symmetrical (thermoneutral, by the [[Chemistry:Hammond's postulate|Hammond Postulate]]), linear transition states have the largest isotope effects, while transition states that are "early" or "late" (for exothermic or endothermic reactions, respectively), or nonlinear (e.g. cyclic) exhibit smaller effects.  These predictions have since received extensive experimental support.<ref>{{Cite journal|last=Kwart|first=Harold | name-list-style = vanc |date=1982-12-01|title=Temperature dependence of the primary kinetic hydrogen isotope effect as a mechanistic criterion |journal=Accounts of Chemical Research|volume=15|issue=12|pages=401–408|doi=10.1021/ar00084a004|issn=0001-4842}}</ref>

For secondary deuterium isotope effects, Streitwieser proposed that weakening (or strengthening, in the case of an inverse isotope effect) of bending modes from the reactant ground state to the transition state are largely responsible for observed isotope effects.  These changes are attributed to a change in steric environment when the carbon bound to the H/D undergoes rehybridization from sp<sup>3</sup> to sp<sup>2</sup> or vice versa (an α secondary kinetic isotope effect), or bond weakening due to hyperconjugation in cases where a carbocation is being generated one carbon atom away (a β secondary kinetic isotope effect). These isotope effects have a theoretical maximum of ''k''<sub>H</sub>/''k''<sub>D</sub> = 2<sup>0.5</sup> ≈ 1.4.  For a secondary kinetic isotope effect at the α position, rehybridization from sp<sup>3</sup> to sp<sup>2</sup> produces a normal isotope effect, while rehybridization from sp<sup>2</sup> to sp<sup>3</sup> results in an inverse isotope effect with a theoretical minimum of ''k''<sub>H</sub>/''k''<sub>D</sub> = 2<sup>-0.5</sup> ≈ 0.7.  In practice, ''k''<sub>H</sub>/''k''<sub>D</sub> ~ 1.1-1.2 and ''k''<sub>H</sub>''/k''<sub>D</sub> ~ 0.8-0.9 are typical for α secondary kinetic isotope effects, while ''k''<sub>H</sub>/''k''<sub>D</sub> ~ 1.15-1.3 are typical for β secondary kinetic isotope effect.  For reactants containing several isotopically substituted β-hydrogen atoms, the observed isotope effect is often the result of several H/D's at the β position acting in concert.  In these cases, the effect of each isotopically labeled atom is multiplicative, and cases where ''k''<sub>H</sub>/''k''<sub>D</sub> > 2 are not uncommon.<ref>{{cite journal | vauthors = Streitwieser A, Jagow RH, Fahey RC, Suzuki S | title = Kinetic isotope effects in the acetolyses of deuterated cyclopentyl tosylates1, 2. | journal = Journal of the American Chemical Society | date = May 1958 | volume = 80 | issue = 9 | pages = 2326–32 | doi = 10.1021/ja01542a075 }}</ref>

The following simple expressions relating deuterium and tritium kinetic isotope effects, which are also known as the [[Swain equation]] (or the Swain-Schaad-Stivers equations), can be derived from the general expression given above using some simplifications:<ref name="Saunders" /><ref>{{cite journal| vauthors = Swain CG, Stivers EC, Reuwer Jr JF, Schaad LJ |title=Use of Hydrogen Isotope Effects to Identify the Attacking Nucleophile in the Enolization of Ketones Catalyzed by Acetic Acid|journal=Journal of the American Chemical Society|date=1 November 1958 |volume=80 |issue=21 |pages=5885–5893 |doi=10.1021/ja01554a077 }}</ref>

:<math chem="">\left(\frac{\ln\left(\frac{k_\ce{H}}{k_\ce{T}}\right)}{\ln\left(\frac{k_\ce{H}}{k_\ce{D}}\right)}\right)_s\cong\frac{1-\sqrt{m_\ce{H}/m_\ce{T}}}{1-\sqrt{m_\ce{H}/m_\ce{D}}}=\frac{1-\sqrt{1/3}}{1-\sqrt{1/2}}\cong1.44</math>;

i.e.,

:<math chem>\left(\frac{k_\ce{H}}{k_\ce{T}}\right)_s=\left(\frac{k_\ce{H}}{k_\ce{D}}\right)_s^{1.44}</math>.

In deriving these expressions, the reasonable approximation that reduced masses are approximately equal to the masses of the hydrogen, deuterium, or tritium was used. In addition, the vibrational motion was assumed to be approximated by a harmonic oscillator, so that <math>
u_{i\mathrm{X}}\propto \mu_{\mathrm{X}}^{-1/2}\cong m_{\mathrm{X}}^{-1/2}
</math> (X = H, D, or T). The subscript "''s''" refers to these "semi-classical" kinetic isotope effects, which disregard quantum tunneling. Tunneling contributions must be treated separately as a correction factor.

For isotope effects involving elements other than hydrogen, many of these simplifications are not valid, and the magnitude of the isotope effect may depend strongly on some or all of the neglected factors. Thus, kinetic isotope effects for elements other than hydrogen are often much more difficult to rationalize or interpret.  In many cases and especially for hydrogen-transfer reactions, contributions to kinetic isotope effects from tunneling are significant (see below).

=== Tunneling ===

In some cases, an additional rate enhancement is seen for the lighter isotope, possibly due to [[Physics:Quantum tunnelling|quantum mechanical tunnelling]]. This is typically only observed for reactions involving bonds to hydrogen atoms.
Tunneling occurs when a molecule penetrates through a potential energy barrier rather than over it.<ref name="anslyn">{{cite book | vauthors = Anslyn EV, Dougherty DA
 |year=2006
 |title=Modern Physical Organic Chemistry
 | url = https://archive.org/details/modernphysicalor00ansl
 | url-access = limited
 |publisher= University Science Books
 |pages=[https://archive.org/details/modernphysicalor00ansl/page/n455 428]–437
 |isbn=978-1-891389-31-3
}}</ref><ref name="razauy">{{cite book
 | vauthors = Razauy M
 |year=2003
 |title=Quantum Theory of Tunneling
 | url = https://archive.org/details/quantumtheoryoft0000raza
 | url-access = registration
 |publisher=[[Company:World Scientific|World Scientific]]
 |isbn=978-981-238-019-7
}}</ref> Although not allowed by the laws of [[Physics:Classical mechanics|classical mechanics]], particles can pass through classically forbidden regions of space in quantum mechanics based on [[Physics:Wave–particle duality|wave–particle duality]].<ref name="silbey">{{cite book
 | vauthors = Silbey RJ, Alberty RA, Bawendi MG
 |year=2005
 |title=Physical Chemistry
 |pages=326–338
 |publisher={{wipe|John Wiley & Sons}}
 |isbn=978-0-471-21504-2
}}</ref>

[[File:Energy Well Model.png|thumb|550px|right|The potential energy well of a tunneling reaction. The dash-red arrow shows the classical activated process, while the solid-red arrow shows the tunneling path.<ref name="anslyn" />]]

Analysis of tunneling can be made using Bell's modification of the [[Arrhenius equation]], which includes the addition of a tunneling factor, Q:
:<math>k=QAe^{-E/RT}</math>
where A is the Arrhenius parameter, E is the barrier height and
:<math>Q = \frac{e^\alpha}{\beta-\alpha}(\beta e^{-\alpha}-\alpha e^{- \beta})</math>
where <math>\alpha=\frac{E}{RT}</math> and <math>\beta=\frac{2a \pi ^2(2mE)^{1/2}}{h}</math>

Examination of the ''β'' term shows exponential dependency on the mass of the particle. As a result, tunneling is much more likely for a lighter particle such as hydrogen. Simply doubling the mass of a tunneling proton by replacing it with its [[Physics:Deuterium|deuterium]] isotope drastically reduces the rate of such reactions. As a result, very large kinetic isotope effects are observed that can not be accounted for by differences in zero point energies.
[[File:Donor Acceptor Model.png|thumb|250px|center|Donor-Acceptor Model of a proton transfer.<ref name=Borgis>{{cite journal
 | vauthors = Borgis D, Hynes JT
 |year=1993
 |title=Dynamical theory of proton tunneling transfer rates in solution: General formulation
 |journal=Chemical Physics
 |volume=170 |issue=3 |pages=315–346
 |bibcode=1993CP....170..315B
 |doi=10.1016/0301-0104(93)85117-Q
}}</ref>]]

In addition, the ''β'' term depends linearly with barrier width, 2a. As with mass, tunneling is greatest for small barrier widths. Optimal tunneling distances of protons between donor and acceptor atom is 0.4&nbsp;Å.<ref name="Krishtalik_2000">{{cite journal | vauthors = Krishtalik LI | title = The mechanism of the proton transfer: an outline | journal = Biochimica et Biophysica Acta (BBA) - Bioenergetics | volume = 1458 | issue = 1 | pages = 6–27 | date = May 2000 | pmid = 10812022 | doi = 10.1016/S0005-2728(00)00057-8 | doi-access = free }}</ref>

{{hidden|toggle=left|1=Temperature dependence in tunneling|2=
Tunneling is a quantum mechanical effect tied to the laws of wave mechanics, not kinetics. Therefore, tunneling tends to become more important at low temperatures, where even the smallest kinetic energy barriers may not be overcome but can be tunneled through.<ref name="anslyn" />

Peter S. Zuev et al. reported rate constants for the ring expansion of 1-methylcyclobutylfluorocarbene to be 4.0 x 10<sup>−6</sup>/s in nitrogen and 4.0 x 10<sup>−5</sup>/s in argon at 8 kelvin. They calculated that at 8 kelvin, the reaction would proceed via a single quantum state of the reactant so that the reported rate constant is temperature independent and the tunneling contribution to the rate was 152 orders of magnitude greater than the contribution of passage over the transition state energy barrier.<ref name=Zuev>{{cite journal | vauthors = Zuev PS, Sheridan RS, Albu TV, Truhlar DG, Hrovat DA, Borden WT | title = Carbon tunneling from a single quantum state | journal = Science | volume = 299 | issue = 5608 | pages = 867–70 | date = February 2003 | pmid = 12574623 | doi = 10.1126/science.1079294 | bibcode = 2003Sci...299..867Z | s2cid = 20959068 }}</ref>

So despite the fact that conventional chemical reactions tend to slow down dramatically as the temperature is lowered, tunneling reactions rarely change at all. Particles that tunnel through an activation barrier are a direct result of the fact that the wave function of an intermediate species, reactant or product is not confined to the energy well of a particular trough along the energy surface of a reaction but can "leak out" into the next energy minimum. In light of this, tunneling ''should'' be temperature independent.<ref name="anslyn" /><ref name="Atkins">{{cite book
 | vauthors = Atkins P, de Paula J
 |year=2006
 |edition = 8th
 |title=Atkins' Physical Chemistry
 | url = https://archive.org/details/atkinsphysicalch00atki
 | url-access = limited
 |pages=[https://archive.org/details/atkinsphysicalch00atki/page/n318 286]–288, 816–818
 |publisher=[[Organization:Oxford University Press|Oxford University Press]]
 |isbn=978-0-19-870072-2
}}</ref>

For the hydrogen abstraction from gaseous n-alkanes and cycloalkanes by hydrogen atoms over the temperature range 363–463 K, the H/D kinetic isotope effect data were characterized by small preexponential factor ratios ''A''<sub>H</sub>/''A''<sub>D</sub> ranging from 0.43 to 0.54 and large activation energy differences from 9.0 to 9.7 kJ/mol. Basing their arguments on [[Chemistry:Transition state theory|transition state theory]], the small ''A'' factor ratios associated with the large activation energy differences (usually about 4.5 kJ/mol for C–H(D) bonds) provided strong evidence for tunneling. For the purpose of this discussion, it is important is that the ''A'' factor ratio for the various paraffins they used was approximately constant throughout the temperature range.<ref name=Fujisaki>{{cite journal
 | vauthors = Fujisaki N, Ruf A, Gaeumann T
 |year=1987
 |title=Tunnel effects in hydrogen-atom-transfer reactions as studied by the temperature dependence of the hydrogen deuterium kinetic isotope effects
 |journal=Journal of Physical Chemistry
 |volume=91 |issue=6 |pages=1602–1606
 |doi=10.1021/j100290a062
}}</ref>

The observation that tunneling is not entirely temperature independent can be explained by the fact that not all molecules of a certain species occupy their vibrational ground state at varying temperatures. Adding thermal energy to a potential energy well could cause higher vibrational levels other than the ground state to become populated. For a conventional kinetically driven reaction, this excitation would only have a small influence on the rate. However, for a tunneling reaction, the difference between the zero point energy and the first vibrational energy level could be huge. The tunneling correction term ''Q'' is linearly dependent on barrier width and this width is significantly diminished as the number vibrational modes on the [[Physics:Morse potential|Morse potential]] increase. The decrease of the barrier width can have such a huge impact on the tunneling rate that even a small population of excited vibrational states would dominate this process.<ref name="anslyn" /><ref name="Atkins" />
}}

{{hidden|toggle=left|1=Criteria for KIE tunneling|2=
To determine if tunneling is involved in KIE of a reaction with H or D, a few criteria are considered:
# Δ(''E<sub>a</sub>''<sup>H</sup>-''E<sub>a</sub>''<sup>D</sup>) > Δ(''ZPE''<sup>H</sup>-''ZPE''<sup>D</sup>) (''E<sub>a</sub>''=activation energy; ZPE=zero point energy)
# Reaction still proceeds at lower temperatures.
# The [[Arrhenius equation|Arrhenius]] pre-exponential factors ''A''<sub>D</sub>/''A''<sub>H</sub> is not equal to 1.
# A large negative [[Physics:Entropy|entropy]] of activation.
# The geometries of the reactants and products are usually very similar.<ref name="anslyn" />
Also for reactions where isotopes include H, D and T, a criterion of tunneling is the Swain-Schaad relations which compare the rate constants (''k'') of the reactions where H, D or T are exchanged:
:''k''<sub>H</sub>/''k''<sub>T</sub>=(''k''<sub>D</sub>/''k''<sub>T</sub>)''<sup>X</sup>''  and  ''k''<sub>H</sub>/''k''<sub>T</sub>=(''k''<sub>H</sub>/''k''<sub>D</sub>)''<sup>Y</sup>''
Experimental values of X exceeding 3.26 and Y lower than 1.44 are evidence of a certain amount of contribution from tunneling.<ref name="Krishtalik_2000" /><ref name="Laidler_1987" />{{rp|437–8}}
}}

{{hidden|toggle=left|1=Examples for tunneling in KIE|2=
In organic reactions, this proton tunneling effect has been observed in such reactions as the [[Chemistry:Deprotonation|deprotonation]] and iodination of [[Chemistry:Nitro compound|nitropropane]] with hindered [[Chemistry:Pyridine|pyridine]] base<ref>{{cite journal
 | vauthors = Lewis ES, Funderburk L
 |year=1967
 |title=Rates and isotope effects in the proton transfers from 2-nitropropane to pyridine bases
 |journal=[[Organization:Journal of the American Chemical Society|Journal of the American Chemical Society]]
 |volume=89 |issue=10 |pages=2322–2327
 |doi=10.1021/ja00986a013
}}</ref> with a reported KIE of 25 at 25&nbsp;°C:

:[[File:KIE effect iodination.png|400px|KIE effect iodination]]

and in a [[Chemistry:Sigmatropic reaction|1,5-sigmatropic hydrogen shift]]<ref>{{cite journal
 | vauthors = Dewar MJ, Healy EF, Ruiz JM
 |year=1988
 |title=Mechanism of the 1,5-sigmatropic hydrogen shift in 1,3-pentadiene
 |journal=[[Organization:Journal of the American Chemical Society|Journal of the American Chemical Society]]
 |volume=110 |issue=8 |pages=2666–2667
 |doi=10.1021/ja00216a060
}}</ref> although it is observed that it is difficult to extrapolate experimental values obtained at elevated temperatures to lower temperatures:<ref>{{cite journal | vauthors = von Doering W, Zhao X | title = Effect on kinetics by deuterium in the 1,5-hydrogen shift of a cisoid-locked 1,3(Z)-pentadiene, 2-methyl-10-methylenebicyclo[4.4.0]dec-1-ene: evidence for tunneling? | journal = Journal of the American Chemical Society | volume = 128 | issue = 28 | pages = 9080–5 | date = July 2006 | pmid = 16834382 | doi = 10.1021/ja057377v }}</ref><ref>In this study the KIE is measured by sensitive proton NMR. The extrapolated KIE at 25&nbsp;°C is 16.6 but the margin of error is high</ref>

:[[File:KIE effect sigmatropicReaction 2006.png|400px|KIE effect sigmatropic reaction]]
It has long been speculated that high efficiency of enzyme catalysis in proton or hydride ion transfer reactions could be due partly to the quantum mechanical tunneling effect. Environment at the active site of an enzyme positions the donor and acceptor atom close to the optimal tunneling distance, where the amino acid side chains can "force" the donor and acceptor atom closer together by electrostatic and noncovalent interactions. It is also possible that the enzyme and its unusual hydrophobic environment inside a reaction site provides tunneling-promoting vibration.<ref name=Kohen>{{cite journal | vauthors = Kohen A, Klinman JP | title = Hydrogen tunneling in biology | journal = Chemistry & Biology | volume = 6 | issue = 7 | pages = R191-8 | date = July 1999 | pmid = 10381408 | doi = 10.1016/S1074-5521(99)80058-1 | doi-access = free }}</ref> Studies on ketosteroid isomerase have provided experimental evidence that the enzyme actually enhances the coupled motion/hydrogen tunneling by comparing primary and secondary kinetic isotope effects of the reaction under enzyme catalyzed and non-enzyme catalyzed conditions.<ref name=pollack>{{cite journal | vauthors = Wilde TC, Blotny G, Pollack RM | title = Experimental evidence for enzyme-enhanced coupled motion/quantum mechanical hydrogen tunneling by ketosteroid isomerase | journal = Journal of the American Chemical Society | volume = 130 | issue = 20 | pages = 6577–85 | date = May 2008 | pmid = 18426205 | doi = 10.1021/ja0732330 }}</ref>

Many examples exist for proton tunneling in enzyme catalyzed reactions that were discovered by KIE. A well studied example is methylamine dehydrogenase, where large primary KIEs of 5–55 have been observed for the proton transfer step.<ref name=Villa>{{cite journal
 | vauthors = Truhlar DG, Gao J, Alhambra C, Garcia-Viloca M, Corchado J, Sánchez M, Villà J
 |year=2002
 |title=The Incorporation of Quantum Effects in Enzyme Kinetics Modeling
 |journal=[[Chemistry:Accounts of Chemical Research|Accounts of Chemical Research]]
 |volume=35 |issue=6 |pages=341–349
 |doi=10.1021/ar0100226
|pmid=12069618
 }}</ref>

[[File:Methylamine dehydrogenase.gif|thumb|2000px|center|Mechanism of methylamine dehydrogenase, the quinoprotein converts primary amines to aldehyde and ammonia.]]

Another example of tunneling contribution to proton transfer in enzymatic reactions is the reaction carried out by [[Biology:Alcohol dehydrogenase|alcohol dehydrogenase]]. Competitive KIEs for the hydrogen transfer step at 25&nbsp;°C resulted in 3.6 and 10.2 for primary and secondary KIEs, respectively.<ref name=KlinmanKohen>{{cite journal
 |year=1998
 |title=Enzyme Catalysis: Beyond Classical Paradigms
 |journal=[[Chemistry:Accounts of Chemical Research|Accounts of Chemical Research]]
 |volume=31 |issue=7 |pages=397–404
 |doi=10.1021/ar9701225
}}</ref>
[[File:Alcohol dehydrogenase.png|thumb|800px|center|Mechanism of alcohol dehydrogenase. The rate limiting step is the proton transfer]]
}}

=== Transient kinetic isotope effect ===

{{Main|Physics:Transient kinetic isotope fractionation}}

Isotopic effect expressed with the equations given above only refer to reactions that can be described with first-order kinetics. In all instances in which this is not possible, [[Physics:Transient kinetic isotope fractionation|transient kinetic isotope effects]] should be taken into account using the GEBIK and GEBIF equations.<ref name="Maggi">{{cite journal
 | vauthors = Maggi F, Riley WJ
 |year=2010
 |title=Mathematical treatment of isotopologue and isotopomer speciation and fractionation in biochemical kinetics
 |journal=Geochimica et Cosmochimica Acta
 |volume=74 |issue=6 |page=1823
 |bibcode=2010GeCoA..74.1823M
 |doi=10.1016/j.gca.2009.12.021
|s2cid=55422661
 |url=http://www.escholarship.org/uc/item/0x8927jx
 }}</ref>

== Experiments ==

Simmons and [[Biography:John F. Hartwig|Hartwig]] refer to the following three cases as the main types of kinetic isotope effect experiments involving C-H bond functionalization:<ref name="Simmons_2012">{{cite journal | vauthors = Simmons EM, Hartwig JF | title = On the Interpretation of Deuterium Kinetic Isotope Effects in C–H Bond Functionalizations by Transition‐Metal Complexes | journal = Angewandte Chemie International Edition | date = March 2012 | volume = 51 | issue = 1 | pages = 3066–72 | doi = 10.1002/anie.201107334 | pmid = 22392731 }}</ref>

:'''A) '''KIE determined from absolute rates of two parallel reactions
[[File:KIE determined from absolute rates of two parallel reactions.png|center]]
In this experiment, the rate constants for the normal substrate and its isotopically labeled analogue are determined independently, and the KIE is obtained as a ratio of the two. The accuracy of the measured KIE is severely limited by the accuracy with which each of these rate constants can be measured. Furthermore, reproducing the exact conditions in the two parallel reactions can be very challenging. Nevertheless, a measurement of a large kinetic isotope effect through direct comparison of rate constants is indicative that C-H bond cleavage occurs at the rate-determining step. (A smaller value could indicate an isotope effect due to a pre-equilibrium, so that the C-H bond cleavage occurs somewhere before the rate-determining step.)

:'''B) '''KIE determined from an intermolecular competition
[[File:KIE determined from an intermolecular competition.png|center]]
In this type of experiment, the same substrates that are used in Experiment A are employed, but they are allowed in to react in the same container, instead of two separate containers. The kinetic isotope effect from this experiment is determined by the relative amount of products formed from C-H versus C-D functionalization (or it can be inferred from the relative amounts of unreacted starting materials). It is necessary to quench the reaction before it goes to completion to observe the kinetic isotope effect (see the Evaluation section below).  Generally, the reaction is halted at low conversion (~5 to 10% conversion) or a large excess (> 5 equiv.) of the isotopic mixture is used.  This experiment type ensures that both C-H and C-D bond functionalizations occur under exactly the same conditions, and the ratio of products from C-H and C-D bond functionalizations can be measured with much greater precision than the rate constants in Experiment A. Moreover, only a single measurement of product concentrations from a single sample is required. However, an observed kinetic isotope effect from this experiment is more difficult to interpret, since it may either mean that C-H bond cleavage occurs during the rate-determining step or at a product-determining step ensuing the rate-determining step. The absence of a kinetic isotope effect, at least according to Simmons and Hartwig, is nonetheless indicative of the C-H bond cleavage not occurring during the rate-determining step.

:'''C) '''KIE determined from an intramolecular competition
[[File:KIE determined from an intramolecular competition.png|center]]
This type of experiment is analogous to Experiment B, except this time there is an intramolecular competition for the C-H or C-D bond functionalization. In most cases, the substrate possesses a directing group (DG) between the C-H and C-D bonds. Calculation of the kinetic isotope effect from this experiment and its interpretation follow the same considerations as that of Experiment B.  However, the results of Experiments B and C will differ if the irreversible binding of the isotope-containing substrate takes place in Experiment B ''prior'' to the cleavage of the C-H or C-D bond.  In such a scenario, an isotope effect may be observed in Experiment C (where choice of the isotope can take place even after substrate binding) but not in Experiment B (since the choice of whether C-H or C-D bond cleaves is already made as soon as the substrate binds irreversibly).  In contrast to Experiment B, the reaction does not need to be halted at low consumption of isotopic starting material to obtain an accurate ''k''<sub>H</sub>/''k''<sub>D</sub>, since the ratio of H and D in the starting material is 1:1, regardless of the extent of conversion.

One non-C-H activation example of different isotope effects being observed in the case of intermolecular (Experiment B) and intramolecular (Experiment C) competition is the [[Astronomy:Photodissociation|photolysis]] of diphenyldiazomethane in the presence of ''t''-butylamine.  To explain this result, the formation of diphenylcarbene, followed by irreversible nucleophilic attack by ''t''-butylamine was proposed.  Because there is little isotopic difference in the rate of nucleophilic attack, the intermolecular experiment resulted in a KIE close to 1.  In the intramolecular case, however, the product ratio is determined by the proton transfer that occurs after the nucleophilic attack, a process for which there is a substantial KIE of 2.6.<ref>{{Cite journal|last1=Newall|first1=A. Raymond|last2=Hayes|first2=John|last3=Bethell|first3=Donald|date=1974-01-01|title=Intermediates in the decomposition of aliphatic diazo-compounds. Part XI. Mechanistic studies on the reaction of diphenylmethylene with amines in solution|journal=Journal of the Chemical Society, Perkin Transactions 2|language=en|issue=11|pages=1307–1312|doi=10.1039/P29740001307|issn=1364-5471}}</ref>
[[File:Inter vs intramolecular competition KIE.png|center|frameless|600x600px]]
Thus, Experiments A, B, and C will give results of differing levels of precision and require different experimental setup and ways of analyzing data. As a result, the feasibility of each type of experiment will depend on the kinetic and stoichiometric profile of the reaction, as well as the physical characteristics of the reaction mixture (e.g., homogeneous vs. heterogeneous).  Moreover, as noted in the paragraph above, the experiments provide kinetic isotope effect data for different steps of a multi-step reaction, depending on the relative locations of the rate-limiting step, product-determining steps, and/or C-H/D cleavage step.

The hypothetical examples below illustrate common scenarios. Consider the following reaction coordinate diagram.  For a reaction with this profile, all three experiments (A, B, and C) will yield a significant primary kinetic isotope effect:
[[File:Reaction energy profile for when C-H cleavage occurs at the RDS.png|thumb|center|350px|Reaction energy profile for when C-H cleavage occurs at the RDS]]
On the other hand, if a reaction follows the following energy profile, in which the C-H or C-D bond cleavage is irreversible but occurs after the rate-determining step (RDS), no significant kinetic isotope effect will be observed with Experiment A, since the overall rate is not affected by the isotopic substitution. Nevertheless, the irreversible C-H bond cleavage step will give a primary kinetic isotope effect with the other two experiments, since the second step would still affect the product distribution. Therefore, with Experiments B and C, it is possible to observe the kinetic isotope effect even if C-H or C-D bond cleavage occurs not in the rate-determining step, but in the product-determining step.
[[File:Reaction energy profile for when the C-H bond cleavage occurs at a product-determining step after the RDS.png|thumb|center|350px|Reaction energy profile for when the C-H bond cleavage occurs at a product-determining step after the RDS]]

{{hidden|toggle=left|1=Evaluation of Kinetic Isotope Effects in a Hypothetical Multi-Step Reaction|2=
A large part of the kinetic isotope effect arises from vibrational zero-point energy differences between the reactant ground state and the transition state that vary between the reactant and its isotopically substituted analogue. While it is possible to carry involved calculations of kinetic isotope effects using computational chemistry, much of the work done is of simpler order that involves the investigation of whether particular isotopic substitutions produce a detectable kinetic isotope effect or not. Vibrational changes from isotopic substitution at atoms away from the site where the reaction occurs tend to cancel between the reactant and the transition state. Therefore, the presence of a kinetic isotope effect indicates that the isotopically labeled atom is at or very near the reaction site.

The absence of an isotope effect is more difficult to interpret: It may mean that the isotopically labeled atom is away from the reaction site, but it may also mean that there are certain compensating effects that lead to the lack of an observable kinetic isotope effect. For example, the differences between the reactant and the transition state zero-point energies may be identical between the normal reactant and its isotopically labeled version. Alternatively, it may mean that the isotopic substitution is at the reaction site, but vibrational changes associated with bonds to this atom occur after the rate-determining step. Such a case is illustrated in the following example, in which ABCD represents the atomic skeleton of a molecule.

[[File:KIE General Background Hypothetical Reaction.png|none]]

Assuming steady state conditions for the intermediate ABC, the overall rate of reaction is the following:

: <math>\frac{d[A]}{dt} = \frac{k_1k_3[ABCD]}{k_2[D]+k_3}</math>

If the first step is rate-determining, this equation reduces to:

: <math>\frac{d[A]}{dt} = k_1[ABCD]</math>

Or if the second step is rate-determining, the equation reduces to:

: <math>\frac{d[A]}{dt} = \frac{k_1k_3[ABCD]}{k_2[D]}</math>

In most cases, isotopic substitution at A, especially if it is a heavy atom, will not alter ''k''<sub>1</sub> or ''k''<sub>2</sub>, but it will most probably alter ''k''<sub>3</sub>. Hence, if the first step is rate-determining, there will not be an observable kinetic isotope effect in the overall reaction with isotopic labeling of A, but there will be one if the second step is rate-determining. For intermediate cases where both steps have comparable rates, the magnitude of the kinetic isotope effect will depend on the ratio of ''k''<sub>3</sub> and ''k''<sub>2</sub>.

Isotopic substitution of D will alter ''k''<sub>1</sub> and ''k''<sub>2</sub> while not affecting ''k''<sub>3</sub>. The kinetic isotope effect will always be observable with this substitution since ''k''<sub>1</sub> appears in the simplified rate expression regardless of which step is rate-determining, but it will be less pronounced if the second step is rate-determining due to some cancellation between the isotope effects on ''k''<sub>1</sub> and ''k''<sub>2</sub>. This outcome is related to the fact that equilibrium isotope effects are usually smaller than kinetic isotope effects.

Isotopic substitution of B will clearly alter ''k''<sub>3</sub>, but it may also alter ''k''<sub>1</sub> to a lesser extent if the B-C bond vibrations are affected in the transition state of the first step. There may thus be a small isotope effect even if the first step is rate-determining.

This hypothetical consideration reveals how observing kinetic isotope effects may be used to investigate reaction mechanisms. The existence of a kinetic isotope effect is indicative of a change to the vibrational force constant of a bond associated with the isotopically labeled atom at or before the rate-controlling step. Intricate calculations may be used to learn a great amount of detail about the transition state from observed kinetic isotope effects. More commonly, though, the mere qualitative knowledge that a bond associated with the isotopically labeled atom is altered in a certain way can be very useful.<ref name=Buncel3>{{cite book | vauthors = Buncel E, Lee CC | title = Carbon-13 in Organic Chemistry | series = Isotopes in Organic Chemistry | publisher = Elsevier | location = Amsterdam | date = 1977 | volume = 3 | isbn = 978-0-444-41472-4 | oclc = 606113159}}</ref>
}}

=== Evaluation of rate constant ratios from intermolecular competition reactions ===
In competition reactions, the kinetic isotope effect is calculated from isotopic product or remaining reactant ratios after the reaction, but these ratios depend strongly on the extent of completion of the reaction. Most commonly, the isotopic substrate will consist of molecules labeled in a specific position and their unlabeled, ordinary counterparts.<ref name="Saunders" /> It is also possible in case of <sup>13</sup>C kinetic isotope effects, as well as similar cases, to simply rely on the natural abundance of the isotopic carbon for the kinetic isotope effect experiments, eliminating the need for isotopic labeling.<ref name="Singleton_1995">{{cite journal|last1=Singleton|first1=Daniel A.|last2 = Thomas | first2 = Allen A. | name-list-style = vanc |title=High-Precision Simultaneous Determination of Multiple Small Kinetic Isotope Effects at Natural Abundance|journal=Journal of the American Chemical Society|date=September 1995|volume=117|issue=36|pages=9357–9358|doi=10.1021/ja00141a030}}</ref>
The two isotopic substrates will react through the same mechanism, but at different rates. The ratio between the amounts of the two species in the reactants and the products will thus change gradually over the course of the reaction, and this gradual change can be treated in the following manner:<ref name="Saunders" />
Assume that two isotopic molecules, A<sub>1</sub> and A<sub>2</sub>, undergo irreversible competition reactions in the following manner:
:<math chem>\begin{align}
\ce{ {A1} + {B} + {C} + \cdots}\ &\ce{->[k_1] P1}\\
\ce{ {A2} + {B} + {C} + \cdots}\ &\ce{->[k_2] P2}
\end{align}</math>
The kinetic isotope effect for this scenario is found to be:

:<math>\text{KIE} = {k_1 \over k_2} = \frac{\ln (1-F_1)}{\ln (1-F_2) }</math>

Where F<sub>1</sub> and F<sub>2</sub> refer to the fraction of conversions for the isotopic species A<sub>1</sub> and A<sub>2</sub>, respectively.

{{hidden|toggle=left|1=Evaluation|2=
In this treatment, all other reactants are assumed to be non-isotopic. Assuming further that the reaction is of first order with respect to the isotopic substrate A, the following general rate expression for both these reactions can be written:

:<math chem>\text{rate} = {-d[\ce A_n]\over dt} = k_n \times [\ce A_n] \times f([\ce B],[\ce C],\cdots) \text{ where } n=1 \text{ or } 2</math>

Since f([B],[C],…) does not depend on the isotopic composition of A, it can be solved for in both rate expressions with A<sub>1</sub> and A<sub>2</sub>, and the two can be equated to derive the following relations:

:<math chem>{1\over k_1} \times \ce{\mathit{d}[A1]\over [A1]} = {1\over k_2} \times \ce{\mathit{d}[A2] \over [A2]}</math>

:<math chem>{1\over k_1} \times \int \limits_\ce{[A1]^0}^\ce{[A1]} {d[\ce A'_1]\over [\ce A'_1]} = {1\over k_2} \times \int \limits_\ce{[A2]^0}^\ce{[A2]}{d[\ce A'_2] \over [\ce A'_2]}</math>

Where [A<sub>1</sub>]<sup>0</sup> and [A<sub>2</sub>]<sup>0</sup> are the initial concentrations of A<sub>1</sub> and A<sub>2</sub>, respectively. This leads to the following kinetic isotope effect expression:

:<math chem>{k_1 \over k_2} = \frac\ce{\ln ([A1]/[A1]^0)}\ce{\ln ([A2]/[A2]^0) }</math>

Which can also be expressed in terms of fraction amounts of conversion of the two reactions, F<sub>1</sub> and F<sub>2</sub>, where 1-F<sub>n</sub>=[A<sub>n</sub>]/[A<sub>n</sub>]<sup>0</sup> for n = 1 or 2, as follows:

:<math chem>{k_1 \over k_2} = \frac{\ln (1-F_1)}{\ln (1-F_2) }</math>

[[File:F2 vs. F1 in KIE Competition Reactions.png|thumb|center|500px|Relation between the fractions of conversion for the two competing reactions with isotopic substrates. The rate constant ratio ''k''<sub>1</sub>/''k''<sub>2</sub> (KIE) is varied for each curve.]]

As for obtaining the kinetic isotope effects, mixtures of substrates containing stable isotopes may be analyzed using a mass spectrometer, which yields the ratios of the isotopic molecules in the initial substrate (defined here as [A<sub>2</sub>]<sup>0</sup>/[A<sub>1</sub>]<sup>0</sup>=R<sub>0</sub>), in the substrate after some conversion ([A<sub>2</sub>]/[A<sub>1</sub>]=R), or in the product ([P<sub>2</sub>]/[P<sub>1</sub>]=R<sub>P</sub>). When one of the species, e.g. 2, is a radioactive isotope, its mixture with the other species can also be analyzed by its radioactivity, which is measured in molar activities that are proportional to [A<sub>2</sub>]<sup>0</sup> / ([A<sub>1</sub>]<sup>0</sup>+[A<sub>2</sub>]<sup>0</sup>) ≈ [A<sub>2</sub>]<sup>0</sup>/[A<sub>1</sub>]<sup>0</sup> = R<sub>0</sub> in the initial substrate, [A<sub>2</sub>] / ([A<sub>1</sub>]+[A<sub>2</sub>]) ≈ [A<sub>2</sub>]/[A<sub>1</sub>] = R in the substrate after some conversion, and [R<sub>2</sub>] / ([R<sub>1</sub>]+[R<sub>2</sub>]) ≈  [R<sub>2</sub>]/[R<sub>1</sub>] = R<sub>P</sub>, so that the same ratios as in the other case can be measured as long as the radioactive isotope is present in tracer amounts. Such ratios may also be determined using NMR spectroscopy.<ref name=Jankowski>{{cite journal | vauthors = Jankowski S | title = Application of NMR spectroscopy in isotope effects studies. | journal = Annual Reports on NMR Spectroscopy | date = January 2009 | volume = 68 | pages = 149–191 | doi = 10.1016/S0066-4103(09)06803-3 | isbn = 978-0-12-381041-0 }}</ref>

When the substrate composition is followed, the following kinetic isotope effect expression in terms of R<sub>0</sub> and R can be derived:

:<math>\text{KIE} = \frac{k_1}{k_2} = \frac {\ln(1-F_1)}{\ln[(1-F_1)R/R_0]}</math>
}}

{{hidden|toggle=left|1=Measurement of F<sub>1</sub> in terms of weights per unit volume or molarities of the reactants|2=
 Taking the ratio of R and R<sub>0</sub> using the previously derived expression for F<sub>2</sub>, one gets:
:<math chem>{R \over R_0} = \ce{\frac {[A2]/[A1]}{[A2]^0/[A1]^0}} = \ce{\frac {[A2]/[A2]^0}{[A1]/[A1]^0}} = \frac{1-F_2}{1-F_1}=(1-F_1)^{(k_2/k_1)-1}</math>

This relation can be solved in terms of the kinetic isotope effect to obtain the KIE expression given above. When the uncommon isotope has very low abundance, both R<sub>0</sub> and R are very small and not significantly different from each other, such that 1-''F''<sub>1</sub> can be approximated with ''m''/''m''<sub>0</sub> or ''c''/''c''<sub>0</sub>.
}}

Isotopic enrichment of the starting material can be calculated from the dependence of ''R/R''<sub>0</sub> on ''F''<sub>1</sub> for various kinetic isotope effects, yielding the following figure.  Because of the exponential dependence, even very low kinetic isotope effects lead to large changes in isotopic composition of the starting material at high conversions.

[[File:R to R0 vs. F1 in KIE Competition Reactions.png|thumb|center|500px|The isotopic enrichment of the relative amount of species 2 with respect to species 1 in the starting material as a function of conversion of species 1. The value of the kinetic isotope effect (''k''<sub>1</sub>/''k''<sub>2</sub>) is indicated at each curve.]]

When the products are followed, the kinetic isotope effect can be calculated using the products ratio ''R<sub>P</sub>'' along with ''R''<sub>0</sub> as follows:

:<math>{k_1 \over k_2} = \frac {\ln(1-F_1)} {\ln[1-(F_1R_P/R_0)]}</math>

=== Kinetic isotope effect measurement at natural abundance ===
'''Kinetic isotope effect measurement at natural abundance''' is a simple general method for measuring kinetic isotope effects (KIE) for [[Chemistry:Chemical reaction|chemical reaction]]s performed with materials of [[Chemistry:Natural abundance|natural abundance]]. This technique for measuring KIEs overcomes many limitations of previous KIE measurement methods.  KIE measurements from isotopically labeled materials require a new synthesis for each isotopically labeled material (a process often prohibitively difficult), a competition reaction, and an analysis.<ref name="Simmons_2012" /> The KIE measurement at [[Chemistry:Natural abundance|natural abundance]] avoids these issues by taking advantage of high precision quantitative techniques ([[Physics:Nuclear magnetic resonance spectroscopy|nuclear magnetic resonance spectroscopy]], [[Chemistry:Isotope-ratio mass spectrometry|isotope-ratio mass spectrometry]]) to site selectively measure [[Physics:Kinetic fractionation|kinetic fractionation]] of [[Physics:Isotope|isotope]]s, in either product or starting material for a given [[Chemistry:Chemical reaction|chemical reaction]].

==== Single-pulse NMR ====
Quantitative single-pulse [[Physics:Nuclear magnetic resonance spectroscopy|nuclear magnetic resonance spectroscopy]] (NMR) is a method amenable for measuring [[Physics:Kinetic fractionation|kinetic fractionation]] of [[Physics:Isotope|isotope]]s for natural abundance KIE measurements. Pascal ''et al.'' were inspired by studies demonstrating dramatic variations of deuterium within identical compounds from different sources and hypothesized that NMR could be used to measure deuterium kinetic isotope effects at natural abundance.<ref>{{Cite journal| vauthors = Martin GJ, Martin ML |title=Deuterium labelling at the natural abundance level as studied by high field quantitative 2H NMR |journal=Tetrahedron Letters|language=en|year=1984|volume=22|issue=36|pages=3525–3528|doi=10.1016/s0040-4039(01)81948-1}}</ref><ref name=":0" /> Pascal and coworkers tested their hypothesis by studying the [[Chemistry:Insertion reaction|insertion reaction]] of dimethyl diazomalonate into [[Chemistry:Cyclohexane|cyclohexane]]. Pascal et al. measured a KIE of 2.2 using {{SimpleNuclide|H|2}} NMR for materials of natural abundance.<ref name=":0">{{cite journal| vauthors = Pascal Jr RA, Baum MW, Wagner CK, Rodgers LR |title=Measurement of deuterium kinetic isotope effects in organic reactions by natural-abundance deuterium NMR spectroscopy|journal=Journal of the American Chemical Society|date=September 1984|volume=106|issue=18|pages=5377–5378|doi=10.1021/ja00330a071 }}</ref>

[[File:Chemical reaction 1.png|frameless|none|500px]]

Singleton and coworkers demonstrated the capacity of {{SimpleNuclide|C|13}} NMR based natural abundance KIE measurements for studying the mechanism of the [4 + 2] [[Chemistry:Cycloaddition|cycloaddition]] of [[Chemistry:Isoprene|isoprene]] with [[Chemistry:Maleic anhydride|maleic anhydride]].<ref name="Singleton_1995" /> Previous studies by Gajewski on isotopically enrich materials observed KIE results that suggested an asynchronous transition state, but were always consistent, within error, for a perfectly synchronous [[Physics:Reaction mechanism|reaction mechanism]].<ref>{{cite journal| vauthors = Gajewski JJ, Peterson KB, Kagel JR, Huang YJ |date=December 1989|title=Transition-state structure variation in the Diels-Alder reaction from secondary deuterium kinetic isotope effects. The reaction of nearly symmetrical dienes and dienophiles is nearly synchronous|journal=Journal of the American Chemical Society|volume=111|issue=25|pages=9078–9081|doi=10.1021/ja00207a013 }}</ref>

[[File:Chemical reaction 2.png|frameless|none|500px]]

This work by Singleton et al. established the measurement of multiple {{SimpleNuclide|C|13}} KIE's within the design of a single experiment. These {{SimpleNuclide|H|2}} and {{SimpleNuclide|C|13}} KIE measurements determined at natural abundance found the "inside" hydrogens of the diene experience a more pronounced {{SimpleNuclide|H|2}} KIE than the "outside" hydrogens" and the C1 and C4 experience a significant KIE. These key observations suggest an asynchronous [[Physics:Reaction mechanism|reaction mechanism]] for the [[Chemistry:Cycloaddition|cycloaddition]] of [[Chemistry:Isoprene|isoprene]] with [[Chemistry:Maleic anhydride|maleic anhydride]].

[[File:KIE measurements.png|frameless|274x274px]]

The limitations for determining KIE's at natural abundance using NMR are that the recovered material must have a suitable amount and purity for NMR analysis (the signal of interest should be distinct from other signals), the reaction of interest must be irreversible, and the [[Physics:Reaction mechanism|reaction mechanism]] must not change for the duration of the [[Chemistry:Chemical reaction|chemical reaction]].

Experimental details for using quantitative single pulse NMR to measure kinetic isotope effect at natural abundance as follows: the experiment needs to be performed under quantitative conditions including a relaxation time of 5 T<sub>1,</sub> measured 90° flip angle, a digital resolution of at least 5 points across a peak, and a signal:noise greater than 250. The raw FID is zero-filled to at least 256K points before the Fourier transform. NMR spectra are phased and then treated with a zeroth order baseline correction without any tilt correction. Signal integrations are determined numerically with a minimal tolerance for each integrated signal.<ref name="Singleton_1995" />{{clarify|date=November 2018}}

==== Organometallic reaction mechanism elucidation examples ====
Colletto ''et al.'' developed a regioselective <math>\beta</math>-arylation of benzo[b]thiophenes at room temperature with aryl iodides as coupling partners and sought to understand the mechanism of this reaction by performing natural abundance kinetic isotope effect measurements via single pulse NMR.<ref name=":1">{{cite journal | vauthors = Colletto C, Islam S, Juliá-Hernández F, Larrosa I | title = Room-Temperature Direct β-Arylation of Thiophenes and Benzo[b]thiophenes and Kinetic Evidence for a Heck-type Pathway | journal = Journal of the American Chemical Society | volume = 138 | issue = 5 | pages = 1677–83 | date = February 2016 | pmid = 26788885 | pmc = 4774971 | doi = 10.1021/jacs.5b12242 }}</ref>
[[File:Reaction scheme for the beta arylation of benzo b thiophenes.png|none|thumb|553x553px|Regioselective <math>\beta</math>-arylation of benzo[b]thiophenes]]

[[File:1H KIEs for beta arylation of benzo b thiophenes.png|none|thumb|200x200px|<sup>2</sup>H KIEs measured at natural abundance]]

[[File:13C KIEs for beta arylation of benzo b thiophenes.png|none|thumb|200x200px|<sup>13</sup>C KIEs measured at natural abundance]]

The observation of a primary <sup>13</sup>C isotope effect at C3, an inverse <sup>2</sup>H isotope effect, a secondary <sup>13</sup>C isotope effect at C2, and the lack of an <sup>2</sup>H isotope effect at C2 lead Colletto ''et al.'' to suggest a Heck-type reaction mechanism for the regioselective <math>\beta</math>-arylation of benzo[b]thiophenes at room temperature with aryl iodides as coupling partners.<ref name=":1" />

Frost ''et'' ''al.'' sought to understand the effects of [[Chemistry:Lewis acid|Lewis acid]] additives on the mechanism of enantioselective palladium catalyzed C-N bond activation using natural abundance kinetic isotope effect measurements via single pulse NMR.<ref name=":2">{{cite journal | vauthors = Frost GB, Serratore NA, Ogilvie JM, Douglas CJ | title = Mechanistic Model for Enantioselective Intramolecular Alkene Cyanoamidation via Palladium-Catalyzed C-CN Bond Activation | journal = The Journal of Organic Chemistry | volume = 82 | issue = 7 | pages = 3721–3726 | date = April 2017 | pmid = 28294618 | doi = 10.1021/acs.joc.7b00196 | pmc = 5535300 }}</ref>
[[File:Enantioselective intramolecular alkene cyanoamidation reaction scheme.png|none|thumb|513x513px|Enantioselective intramolecular alkene cyanoamidation]]
[[File:13C KIEs for enantioselective intramolecular alkene cyanoamidation reaction scheme.png|none|thumb|542x542px|13C KIEs for enantioselective intramolecular alkene cyanoamidation reaction (left no additive, right add BPh<sub>3</sub>)]]
The primary <sup>13</sup>C kinetic isotope effect observed in the absence of BPh<sub>3</sub> suggests a reaction mechanism with rate limiting cis oxidation into the C–CN bond of the cyanoformamide. The addition of BPh<sub>3</sub> causes a relative decrease in the observed <sup>13</sup>C kinetic isotope effect which led Frost ''et'' ''al.'' to suggest a change in the rate limiting step from cis oxidation to coordination of palladium to the cyanoformamide.<ref name=":2" />

==== DEPT-55 NMR ====
Although kinetic isotope effect measurements at natural abundance are a powerful tool for understanding reaction mechanisms, the amounts of material required for analysis can make this technique inaccessible for reactions that employ expensive reagents or unstable starting materials. In order to mitigate these limitations, Jacobsen and coworkers developed <sup>1</sup>H to <sup>13</sup>C polarization transfer as a means to reduce the time and material required for kinetic isotope effect measurements at natural abundance. The distortionless enhancement by polarization transfer (DEPT) takes advantage of the larger [[Physics:Gyromagnetic ratio|gyromagnetic ratio]] of <sup>1</sup>H over <sup>13</sup>C &nbsp;to theoretically improve measurement sensitivity by a factor of 4 or decrease experiment time by a factor of 16. This method for natural abundance kinetic isotope measurement is favorable for analysis for reactions containing unstable starting materials, and catalysts or products that are relatively costly.<ref>{{cite journal | vauthors = Kwan EE, Park Y, Besser HA, Anderson TL, Jacobsen EN | title = 13C Kinetic Isotope Effect Measurements Enabled by Polarization Transfer | journal = Journal of the American Chemical Society | volume = 139 | issue = 1 | pages = 43–46 | date = January 2017 | pmid = 28005341 | doi = 10.1021/jacs.6b10621 | pmc = 5674980 }}</ref>

Jacobsen and coworkers identified the thiourea-catalyzed glycosylation of galactose as a reaction that met both of the aforementioned criteria (expensive materials and unstable substrates) and was a reaction with a poorly understood mechanism.<ref>{{cite journal | vauthors = Park Y, Harper KC, Kuhl N, Kwan EE, Liu RY, Jacobsen EN | title = Macrocyclic bis-thioureas catalyze stereospecific glycosylation reactions | journal = Science | volume = 355 | issue = 6321 | pages = 162–166 | date = January 2017 | pmid = 28082586 | pmc = 5671764 | doi = 10.1126/science.aal1875 | bibcode = 2017Sci...355..162P }}</ref> Glycosylation is a special case of nucleophilic substitution that lacks clear definition between S<sub>N</sub>1 and S<sub>N</sub>2 mechanistic character. The presence of the oxygen adjacent to the site of displacement (i.e., C1) can stabilize positive charge. This charge stabilization can cause any potential concerted pathway to become asynchronous and approaches intermediates with oxocarbenium character of the S<sub>N</sub>1 mechanism for glycosylation.

[[File:Reaction Scheme for Thiourea catalyzed glycosylation of galactose.png|alt=Reaction scheme for thiourea catalyzed glycosylation of galactose|none|thumb|492x492px|Reaction scheme for thiourea catalyzed glycosylation of galactose]]
[[File:Kinetic Isotope Effect Measurements for Thiourea catalyzed glycosylation of galactose.png|alt=13C kinetic isotope effect measurements for thiourea catalyzed glycosylation of galactose|none|thumb|350x350px|<sup>13</sup>C kinetic isotope effect measurements for thiourea catalyzed glycosylation of galactose]]

Jacobsen and coworkers observed small normal KIE's at C1, C2, and C5 which suggests significant oxocarbenium character in the transition state and an asynchronous reaction mechanism with a large degree of charge separation.

==== Isotope-ratio mass spectrometry ====

High precision [[Chemistry:Isotope-ratio mass spectrometry|isotope-ratio mass spectrometry]] (IRMS) is another method for measuring [[Physics:Kinetic fractionation|kinetic fractionation]] of [[Physics:Isotope|isotope]]s for natural abundance KIE measurements. Widlanski and coworkers demonstrated {{SimpleNuclide|S|34}} KIE at natural abundance measurements for the [[Chemistry:Hydrolysis|hydrolysis]] of [[Chemistry:Sulfate|sulfate]] monoesters. Their observation of a large KIE suggests S-O bond cleavage is rate controlling and likely rules out an associate [[Physics:Reaction mechanism|reaction mechanism]].<ref>{{cite journal | vauthors = Burlingham BT, Pratt LM, Davidson ER, Shiner VJ, Fong J, Widlanski TS | title = 34S isotope effect on sulfate ester hydrolysis: mechanistic implications | journal = Journal of the American Chemical Society | volume = 125 | issue = 43 | pages = 13036–7 | date = October 2003 | pmid = 14570471 | doi = 10.1021/ja0279747 }}</ref>
[[File:34S isotope effect on sulfate ester hydrolysis reaction scheme.png|none|thumb|525x525px|34S isotope effect on sulfate ester hydrolysis reaction]]

The major limitation for determining KIE's at natural abundance using IRMS is the required site selective degradation without isotopic fractionation into an analyzable small molecule, a non-trivial task.<ref name="Singleton_1995" />

== Case studies ==

=== Primary hydrogen isotope effects ===

Primary hydrogen kinetic isotope effects refer to cases in which a bond to the isotopically labeled hydrogen is formed or broken at a rate- and/or product-determining step of a reaction.<ref name="Simmons_2012" /> These are the most commonly measured kinetic isotope effects, and much of the previously covered theory refers to primary kinetic isotope effects.
When there is adequate evidence that transfer of the labeled hydrogen occurs in the rate-determining step of a reaction, if a fairly large kinetic isotope effect is observed, e.g. kH/kD of at least 5-6 or kH/kT about 10–13 at room temperature, it is quite likely that the hydrogen transfer is linear and that the hydrogen is fairly symmetrically located in the transition state. It is usually not possible to make comments about tunneling contributions to the observed isotope effect unless the effect is very large. If the primary kinetic isotope effect is not as large, it is generally considered to be indicative of a significant contribution from heavy-atom motion to the reaction coordinate, although it may also mean that hydrogen transfer follows a nonlinear pathway.<ref name="Saunders" />

=== Secondary hydrogen isotope effects ===

The secondary hydrogen isotope effects or secondary kinetic isotope effect (SKIE) arises in cases where the isotopic substitution is remote from the bond being broken.  The remote atom, nonetheless, influences the internal vibrations of the system that via changes in the zero point energy (ZPE) affect the rates of chemical reactions.<ref>{{cite journal | vauthors = Hennig C, Oswald RB, Schmatz S | title = Secondary kinetic isotope effect in nucleophilic substitution: a quantum-mechanical approach | journal = The Journal of Physical Chemistry A | volume = 110 | issue = 9 | pages = 3071–9 | date = March 2006 | pmid = 16509628 | doi = 10.1021/jp0540151 | bibcode = 2006JPCA..110.3071H }}</ref> Such effects are expressed as ratios of rate for the light isotope to that of the heavy isotope and can be "normal" (ratio is greater than or equal to 1) or "inverse" (ratio is less than 1) effects.<ref name="cleland">{{cite journal | vauthors = Cleland WW | title = The use of isotope effects to determine enzyme mechanisms | journal = The Journal of Biological Chemistry | volume = 278 | issue = 52 | pages = 51975–84 | date = December 2003 | pmid = 14583616 | doi = 10.1074/jbc.X300005200 | doi-access = free }}</ref> SKIE are defined as ''α,β'' (etc.) secondary isotope effects where such prefixes refer to the position of the isotopic substitution relative to the reaction center (see [[Chemistry:Alpha and beta carbon|alpha and beta carbon]]).<ref name=goldbook-sie>{{GoldBookRef |file=S05523 |title=Secondary isotope effect}}</ref> The prefix α refers to the isotope associated with the reaction center while the prefix ''β'' refers to the isotope associated with an atom neighboring the reaction center and so on.

In physical organic chemistry, SKIE is discussed in terms of [[Chemistry:Electronic effect|electronic effect]]s such as induction, bond hybridization, or [[Chemistry:Hyperconjugation|hyperconjugation]].<ref>{{cite web |title=Definition of isotope effect, secondary | url = http://www.chemicool.com/definition/isotope_effect_secondary.html | work = Chemistry Dictionary | publisher = Chemitool }}</ref> These properties are determined by electron distribution, and depend upon vibrationally averaged bond length and angles that are not greatly affected by isotopic substitution. Thus, the use of the term "electronic isotope effect" while legitimate is discouraged from use as it can be misinterpreted to suggest that the isotope effect is electronic in nature rather than vibrational.<ref name="goldbook-sie" />

SKIE's can be explained in terms of changes in orbital hybridization. When the hybridization of a carbon atom changes from sp<sup>3</sup> to sp<sup>2</sup>, a number of vibrational modes (stretches, in-plane and out-of-plane bending) are affected. The in-plane and out-of-plane bending in an sp<sup>3</sup> hybridized carbon are similar in frequency due to the symmetry of an sp<sup>3</sup> hybridized carbon. In an sp<sup>2</sup> hybridized carbon the in-plane bend is much stiffer than the out-of-plane bending resulting in a large difference in the frequency, the [[Physics:Zero-point energy|ZPE]] and thus the SKIE (which exists when there is a difference in the ZPE of the reactant and transition state).<ref name="anslyn" />
The theoretical maximum change caused by the bending frequency difference has been calculated as 1.4.<ref name="anslyn" />

When carbon undergoes a reaction that changes its hybridization from sp<sup>3</sup> to sp<sup>2</sup>, the out of plane bending force constant at the transition state is weaker as it is developing sp<sup>2</sup> character and a "normal" SKIE is observed with typical values of 1.1 to 1.2.<ref name="anslyn" /> Conversely, when carbon's hybridization changes from sp<sup>2</sup> to sp<sup>3</sup>, the out of plane bending force constants at the transition state increase and an inverse SKIE is observed with typical values of 0.8 to 0.9.<ref name="anslyn" />

More generally the SKIE for reversible reactions can be "normal" one way and "inverse" the other if bonding in the transition state is midway in stiffness between substrate and product, or they can be "normal" both ways if bonding is weaker in the transition state, or "inverse" both ways if bonding is stronger in the transition state than in either reactant.<ref name="cleland" />

An example of an "inverse" α secondary kinetic isotope effect can be seen in the work of Fitzpatrick and Kurtz who used such an effect to distinguish between two proposed pathways for the reaction of d-amino acid oxidase with nitroalkane anions.<ref>{{cite journal
 | vauthors = Kurtz KA, Fitzpatrick PF
 |year=1997
 |title=pH and Secondary Kinetic Isotope Effects on the Reaction of D-Amino Acid Oxidase with Nitroalkane Anions: Evidence for Direct Attack on the Flavin by Carbanions
 |journal=[[Organization:Journal of the American Chemical Society|Journal of the American Chemical Society]]
 |volume=119 |issue=5 |pages=1155–1156
 |doi=10.1021/ja962783n
}}</ref> Path A involved a nucleophilic attack on the coenzyme [[Chemistry:Flavin adenine dinucleotide|FAD]], while path B involves a free-radical intermediate. As path A results in the intermediate carbon changing hybridization from sp<sup>2</sup> to sp<sup>3</sup> an "inverse" a SKIE is expected. If path B occurs then no SKIE should be observed as the free radical intermediate does not change hybridization. An SKIE of 0.84 was observed and Path A verified as shown in the scheme below.

[[File:Secondaryradicalneucleophilicdetermination.svg]]

Another example of a SKIE is the oxidation of benzyl alcohols by dimethyldioxirane where three transition states for different mechanisms were proposed. Again, by considering how and if the hydrogen atoms were involved in each, researchers predicted whether or not they would expect an effect of isotopic substitution of them. Then, analysis of the experimental data for the reaction allowed them to choose which pathway was most likely based on the observed isotope effect.<ref>{{cite journal
 | vauthors = Angelis YS, Hatzakis NS, Smonou I, Orfanopoulos M
 |year=2006
 |title=Oxidation of benzyl alcohols by dimethyldioxirane. The question of concerted versus stepwise mechanisms probed by kinetic isotope effects
 |journal=[[Chemistry:Tetrahedron Letters|Tetrahedron Letters]]
 |volume=42 |issue= 22|pages=3753–3756
 |doi=10.1016/S0040-4039(01)00539-1
}}</ref>

Secondary hydrogen isotope effects from the methylene hydrogens were also used to show that Cope rearrangement in 1,5-hexadiene follow a concerted bond rearrangement pathway, and not one of the alternatively proposed allyl radical or 1,4-diyl pathways, all of which are presented in the following scheme.<ref name=Houk>{{cite journal | vauthors = Houk KN, Gustafson SM, Black KA | title = Theoretical secondary kinetic isotope effects and the interpretation of transition state geometries. 1. The Cope rearrangement. | journal = Journal of the American Chemical Society | date = October 1992 | volume = 114 | issue = 22 | pages = 8565–72 | doi = 10.1021/ja00048a032 }}</ref>
[[File:Cope rearrangement mechanisms.png|center|400px]]
Alternative mechanisms for the Cope rearrangement of 1,5-hexadiene: (from top to bottom), allyl radical, synchronous concerted, and 1,4-dyil pathways. The predominant pathway is found to be the middle one, which has six delocalized π electrons corresponding to an aromatic intermediate.<ref name="Houk" />

==== Steric isotope effects ====

{| style="float: right;"
| [[File:racemization.svg|250px]]
|-
| {{center|<math>\frac{k_{(X=D)}}{k_{(X=H)}} = 1.15</math>}}
|}

The steric isotope effect is a SKIE that does not involve bond breaking or formation. This effect is attributed to the different vibrational amplitudes of [[Physics:Isotopologue|isotopologue]]s.<ref>{{GoldBookRef |file=S06001 |title=steric isotope effect}}</ref> An example of such an effect is the [[Biology:Racemization|racemization]] of 9,10-dihydro-4,5-dimethylphenanthrene.<ref>{{cite journal
 | vauthors = Mislow K, Graeve R, Gordon AJ, Wahl GH
 |year=1963
 |title=A Note on Steric Isotope Effects. Conformational Kinetic Isotope Effects in The Racemization of 9,10-Dihydro-4,5-Dimethylphenanthrene
 |journal=[[Organization:Journal of the American Chemical Society|Journal of the American Chemical Society]]
 |volume=85 |issue=8 |pages=1199–1200
 |doi=10.1021/ja00891a038
}}</ref> The smaller amplitude of vibration for deuterium as compared to hydrogen in C–H (carbon–hydrogen), C–D (carbon–deuterium) bonds results in a smaller van der Waals radius or effective size in addition to a difference in the ZPE between the two. When there is a greater effective bulk of molecules containing one over the other this may be manifested by a steric effect on the rate constant. For the example above deuterium racemizes faster than the hydrogen isotopologue resulting in a steric isotope effect.  A model for the steric isotope effect was developed by Bartell.<ref>{{Cite journal| vauthors = Bartell LS |date=1961-09-01|title=The Role of Non-bonded Repulsions in Secondary Isotope Effects. I. Alpha and Beta Substitution Effects.1 |journal=Journal of the American Chemical Society|volume=83|issue=17 |pages=3567–3571 |doi= 10.1021/ja01478a006 }}</ref> A steric isotope effect is usually small, unless the transformations passes through a transition state with severe steric encumbrance, as in the racemization process shown above.

Another example of the steric isotope effect is in the deslipping reaction of rotaxanes. The deuterium isotope, due to its smaller effective size, allows easier passage of the stoppers through the macrocycle, resulting in faster rates of deslipping for the deuterated rotaxanes.<ref>{{cite journal | vauthors = Felder T, Schalley CA | title = Secondary isotope effects on the deslipping reaction of rotaxanes: high-precision measurement of steric size | journal = Angewandte Chemie | volume = 42 | issue = 20 | pages = 2258–60 | date = May 2003 | pmid = 12772156 | doi = 10.1002/anie.200350903 }}</ref>

[[File:chemicalrotaxane.svg]]

=== Inverse kinetic isotope effects ===
Reactions are known where the deuterated species reacts ''faster'' than the undeuterated analogue, and these cases are said to exhibit inverse kinetic isotope effects (IKIE). IKIE's are often observed in the [[Chemistry:Reductive elimination|reductive elimination]] of alkyl metal hydrides, e.g. (Me<sub>2</sub>NCH<sub>2</sub>CH<sub>2</sub>NMe<sub>2</sub>)PtMe(H). In such cases the C-D bond in the transition state, an agostic species, is highly stabilized relative to the C–H bond.<ref>{{cite journal |last1=Churchill |first1=David G. |last2=Janak |first2=Kevin E. |last3=Wittenberg |first3=Joshua S. |last4=Parkin |first4=Gerard |title=Normal and Inverse Primary Kinetic Deuterium Isotope Effects for C−H Bond Reductive Elimination and Oxidative Addition Reactions of Molybdenocene and Tungstenocene Complexes:  Evidence for Benzene σ-Complex Intermediates |journal=J. Am. Chem. Soc. |date=11 January 2003 |volume=125 |issue=5 |pages=1403-1420 |url=https://pubs.acs.org/doi/abs/10.1021/ja027670k |access-date=26 January 2023}}</ref>

An inverse effect can also occur in a multistep reaction if the overall rate constant depends on a pre-equilibria prior to the [[Chemistry:Rate-determining step|rate-determining step]] which has an inverse [[Chemistry:Equilibrium constant#Effect of isotopic substitution|equilibrium isotope effect]]. For example, the rates of [[Chemistry:Acid catalysis|acid-catalyzed]] reactions are usually 2-3 times greater for reactions in D<sub>2</sub>O catalyzed by D<sub>3</sub>O<sup>+</sup> than for the analogous reactions in H<sub>2</sub>O catalyzed by H<sub>3</sub>O<sup>+</sup><ref name="Laidler_1987" />{{rp|433}} This can be explained for a mechanism of [[Chemistry:Acid catalysis#Specific catalysis|specific hydrogen-ion catalysis]] of a reactant R by H<sub>3</sub>O<sup>+</sup> (or D<sub>3</sub>O<sup>+</sup>).
:H<sub>3</sub>O<sup>+</sup> + R {{eqm}} RH<sup>+</sup> + H<sub>2</sub>O
:RH<sup>+</sup> + H<sub>2</sub>O → H<sub>3</sub>O<sup>+</sup> + P
The rate of formation of products is then d[P]/dt = k<sub>2</sub>[RH<sup>+</sup>] = k<sub>2</sub>K<sub>1</sub>[H<sub>3</sub>O<sup>+</sup>][R] = k<sub>obs</sub>[H<sub>3</sub>O<sup>+</sup>][R]. In the first step, H<sub>3</sub>O<sup>+</sup> is usually a stronger acid than RH<sup>+</sup>. Deuteration shifts the equilibrium toward the more strongly bound acid species RD<sup>+</sup> in which the effect of deuteration on zero-point vibrational energy is greater, so that the deuterated equilibrium constant K<sub>1D</sub> is greater than K<sub>1H</sub>. This equilibrium isotope effect in the first step usually outweighs the kinetic isotope effect in the second step, so that there is an apparent inverse isotope effect and the observed overall rate constant k<sub>obs</sub> = k<sub>2</sub>K<sub>1</sub> decreases.<ref name="Laidler_1987" />{{rp|433}}

=== Solvent hydrogen kinetic isotope effects ===

For the solvent isotope effects to be measurable, a finite fraction of the solvent must have a different isotopic composition than the rest.  Therefore, large amounts of the less common isotopic species must be available, limiting observable solvent isotope effects to isotopic substitutions involving hydrogen. Detectable kinetic isotope effects occur only when solutes exchange hydrogen with the solvent or when there is a specific solute-solvent interaction near the reaction site. Both such phenomena are common for protic solvents, in which the hydrogen is exchangeable, and they may form dipole-dipole interactions or hydrogen bonds with polar molecules.<ref name="Saunders" />

=== Carbon-13 isotope effects ===
Most organic reactions involve the breaking and making of bonds to a carbon; thus, it is reasonable to expect detectable carbon isotope effects. When <sup>13</sup>C is used as the label, the change in mass of the isotope is only ~8%, though, which limits the observable kinetic isotope effects to much smaller values than the ones observable with hydrogen isotope effects.

==== Compensating for variations in <sup>13</sup>C natural abundance ====
Often, the largest source of error in a study that depends on the natural abundance of carbon is the slight variation in natural <sup>13</sup>C abundance itself. Such variations arise because the starting materials used in the reaction are themselves products of some other reactions that have kinetic isotope effects and corresponding isotopic enrichments in the products. To compensate for this error when NMR spectroscopy is used to determine the kinetic isotope effect, the following guidelines have been proposed:<ref name=Jankowski />
* Choose a carbon that is remote from the reaction center that will serve as a reference and assume it does not have a kinetic isotope effect in the reaction.
* In the starting material that has not undergone any reaction, determine the ratios of the other carbon NMR peak integrals to that of the reference carbon.
* Obtain the same ratios for the carbons in a sample of the starting material after it has undergone some reaction.
* The ratios of the latter ratios to the former ratios yields R/R<sub>0</sub>.
If these as well as some other precautions listed by Jankowski are followed, kinetic isotope effects with precisions of three decimal places can be achieved.<ref name=Jankowski />

=== Isotope effects with elements heavier than carbon ===

Interpretation of carbon isotope effects are usually complicated by simultaneously forming and breaking bonds to carbon. Even reactions that involve only bond cleavage from the carbon, such as S<sub>N</sub>1 reactions, involve strengthening of the remaining bonds to carbon. In many such reactions, leaving group isotope effects tend to be easier to interpret. For example, substitution and elimination reactions in which chlorine act as a leaving group are convenient to interpret, especially since chlorine acts as a monatomic species with no internal bonding to complicate the reaction coordinate, and it has two stable isotopes, <sup>35</sup>Cl and <sup>37</sup>Cl, both with high abundance. The major challenge to the interpretation of such isotope affects is the solvation of the leaving group.<ref name="Saunders" />

Owing to experimental uncertainties, measurement of isotope effect may entail significant uncertainty.  Often isotope effects are determined through complementary studies on a series of isotopomers. Accordingly, it is quite useful to combine hydrogen isotope effects with heavy-atom isotope effects. For instance, determining nitrogen isotope effect along with hydrogen isotope effect was used to show that the reaction of 2-phenylethyltrimethylammonium ion with ethoxide in ethanol at 40&nbsp;°C follows an E2 mechanism, as opposed to alternative non-concerted mechanisms. This conclusion was reached upon showing that this reaction yields a nitrogen isotope effect, ''k''<sub>14</sub>/''k''<sub>15</sub>, of 1.0133±0.0002 along with a hydrogen kinetic isotope effect of 3.2 at the leaving hydrogen.<ref name="Saunders" />

Similarly, combining nitrogen and hydrogen isotope effects was used to show that syn eliminations of simple ammonium salts also follow a concerted mechanism, which was a question of debate before. In the following two reactions of 2-phenylcyclopentyltrimethylammonium ion with ethoxide, both of which yield 1-phenylcyclopentene, both isomers exhibited a nitrogen isotope effect ''k''<sub>14</sub>/''k''<sub>15</sub> at 60&nbsp;°C. Although the reaction of the trans isomer, which follows syn elimination, has a smaller nitrogen kinetic isotope effect (1.0064) compared to the cis isomer which undergoes anti elimination (1.0108), both results are large enough to be indicative of weakening of the C-N bond in the transition state that would occur in a concerted process.
[[File:Elimination reactions of 2-phenylcyclopentyltrimethylammonium isomers.png|center]]

=== Other examples ===

Since kinetic isotope effects arise from differences in isotopic masses, the largest observable kinetic isotope effects are associated with isotopic substitutions of hydrogen with deuterium (100% increase in mass) or tritium (200% increase in mass). Kinetic isotope effects from isotopic mass ratios can be as large as 36.4 using muons. They have produced the lightest hydrogen atom, <sup>0.11</sup>H (0.113 amu), in which an electron orbits around a positive muon (μ<sup>+</sup>) "nucleus" that has a mass of 206 electrons. They have also prepared the heaviest hydrogen atom analogue by replacing one electron in helium with a negative muon (μ<sup>−</sup>) to form Heμ with an atomic mass of 4.116 amu. Since the negative muon is much heavier than an electron, it orbits much closer to the nucleus, effectively shielding one proton, making Heμ to behave as <sup>4.1</sup>H. With these exotic species, the reaction of H with <sup>1</sup>H<sub>2</sub> was investigated. Rate constants from reacting the lightest and the heaviest hydrogen analogues with <sup>1</sup>H<sub>2</sub> were then used to calculate the ''k''<sub>0.11</sub>/''k''<sub>4.1</sub> kinetic isotope effect, in which there is a 36.4 fold difference in isotopic masses. For this reaction, isotopic substitution happens to produce an inverse kinetic isotope effect, and the authors report a kinetic isotope effect as low as 1.74 x 10<sup>−4</sup>, which is the smallest kinetic isotope effect ever reported.<ref>{{cite journal | vauthors = Fleming DG, Arseneau DJ, Sukhorukov O, Brewer JH, Mielke SL, Schatz GC, Garrett BC, Peterson KA, Truhlar DG | title = Kinetic isotope effects for the reactions of muonic helium and muonium with H2 | journal = Science | volume = 331 | issue = 6016 | pages = 448–50 | date = January 2011 | pmid = 21273484 | doi = 10.1126/science.1199421 | bibcode = 2011Sci...331..448F | s2cid = 206530683 }}</ref>

The kinetic isotope effect leads to a specific distribution of deuterium isotopes in natural products, depending on the route they were synthesized in nature. By NMR spectroscopy, it is therefore easy to detect whether the alcohol in wine was fermented from [[Chemistry:Glucose|glucose]], or from illicitly added saccharose.

Another [[Physics:Reaction mechanism|reaction mechanism]]s that was elucidated using the kinetic isotope effect is the [[Chemistry:Halogenation|halogenation]] of [[Chemistry:Toluene|toluene]]:<ref>{{cite journal
 | vauthors = Wiberg KB, Slaugh LH
 |year=1958
 |title=The Deuterium Isotope Effect in the Side Chain Halogenation of Toluene
 |journal=[[Organization:Journal of the American Chemical Society|Journal of the American Chemical Society]]
 |volume=80 |issue=12 |pages=3033–3039
 |doi=10.1021/ja01545a034
}}</ref>

:[[File:KineticIsotopeEffectHalogenation.png|400px|Kinetic isotope effect in halogenation of toluene]]

In this particular "intramolecular KIE" study, a benzylic hydrogen undergoes [[Chemistry:Radical substitution|radical substitution]] by bromine using [[Chemistry:N-Bromosuccinimide|''N''-bromosuccinimide]] as the brominating agent. It was found that PhCH<sub>3</sub> brominates 4.86x faster than PhCD<sub>3</sub>. A large KIE of 5.56 is associated with the reaction of [[Chemistry:Ketone|ketone]]s with [[Chemistry:Bromine|bromine]] and [[Chemistry:Sodium hydroxide|sodium hydroxide]].<ref>{{cite journal
 | vauthors = Lynch RA, Vincenti SP, Lin YT, Smucker LD, Subba Rao SC
 |year=1972
 |title=Anomalous kinetic hydrogen isotope effects on the rate of ionization of some dialkyl substituted ketones
 |journal=[[Organization:Journal of the American Chemical Society|Journal of the American Chemical Society]]
 |volume=94 |issue=24 |pages=8351–8356
 |doi=10.1021/ja00779a012
}}</ref>

:[[File:KineticIsotopeEffectEnolateFormation.png|500px|Kinetic isotope effect in bromination of ketone]]

In this reaction the rate-limiting step is formation of the [[Chemistry:Enolate|enolate]] by deprotonation of the ketone. In this study the KIE is calculated from the [[Chemistry:Reaction rate constant|reaction rate constant]]s for regular 2,4-dimethyl-3-pentanone and its deuterated isomer by optical density measurements.

In asymmetric catalysis, there are rare instances in which a kinetic isotope effect manifests as a significant difference in the enantioselectivity observed for a deuterated substrate compared to a non-deuterated one.  One example was reported by Toste and coworkers, in which a deuterated substrate produced an enantioselectivity of 83% ee, compared to 93% ee for the undeuterated substrate.  The effect was taken to corroborate additional inter- and intramolecular competition KIE data that suggested cleavage of the C-H/D bond in the enantiodetermining step.<ref>{{cite journal | vauthors = Zi W, Wang YM, Toste FD | title = An in situ directing group strategy for chiral anion phase-transfer fluorination of allylic alcohols | journal = Journal of the American Chemical Society | volume = 136 | issue = 37 | pages = 12864–7 | date = September 2014 | pmid = 25203796 | pmc = 4183625 | doi = 10.1021/ja507468u }}</ref>

[[File:EnantioselectivityKIE.png|frameless|700x700px]]

== See also ==
* [[Chemistry:Crossover experiment|Crossover experiment]]
* [[Chemistry:Equilibrium constant#Effect of isotopic substitution|Equilibrium constant]]
* [[Biology:Isotope effect on lipid peroxidation|Isotope effect on lipid peroxidation]]
* [[Physics:Kinetic isotope effects of RuBisCO|Kinetic isotope effects of RuBisCO]] (ribulose-1,5-bisphosphate carboxylase oxygenase)
* [[Physics:Magnetic isotope effect|Magnetic isotope effect]]
* [[Physics:Reaction mechanism|Reaction mechanism]]
* [[Physics:Transient kinetic isotope fractionation|Transient kinetic isotope fractionation]]
* [[Biology:Urey–Bigeleisen–Mayer equation|Urey–Bigeleisen–Mayer equation]]

== References ==
{{Reflist}}

== Further reading ==
{{refbegin}}
* {{cite journal| vauthors = Bell RP, Crooks JE |title=Kinetic Hydrogen Isotope Effects in the Ionization of Some Ketonic Substances |journal=Proceedings of the Royal Society of London A|date=20 July 1965|volume=286|issue=1406|pages=285–299|doi=10.1098/rspa.1965.0144|bibcode=1965RSPSA.286..285B|s2cid=96761478 }}
{{refend}}

[[Category:Organic chemistry]]
[[Category:Physical organic chemistry]]
[[Category:Chemical kinetics]]
[[Category:Reaction mechanisms]]

{{Sourceattribution|Kinetic isotope effect}}