View source for Physics:Phase (matter)

{{Short description|Region of uniform physical properties}}


In the [[Physics:Outline of physical science|physical sciences]], a '''phase''' is a region of material that is chemically uniform, physically distinct, and (often) mechanically separable. In a system consisting of ice and water in a glass jar, the ice cubes are one phase, the water is a second phase, and the humid air is a third phase over the ice and water. The glass of the jar is another separate phase. (See {{section link|state of matter|Glass}}.)

More precisely, a phase is a region of space (a [[Physics:Thermodynamic system|thermodynamic system]]), throughout which all physical properties of a material are essentially uniform.<ref>{{cite book|last=Modell|first=Michael|author2=Robert C. Reid|title=Thermodynamics and Its Applications|publisher=Prentice-Hall|location=Englewood Cliffs, NJ|date=1974|isbn=978-0-13-914861-3|url-access=registration|url=https://archive.org/details/thermodynamicsit00mode}}</ref><ref name="Fermi2012">{{cite book|author=Enrico Fermi|title=Thermodynamics|year=2012|publisher=Courier Corporation|isbn=978-0-486-13485-7}}</ref>{{rp|86}}<ref name="Adkins1983">{{cite book|author=Clement John Adkins|title=Equilibrium Thermodynamics|year= 1983|publisher=Cambridge University Press|isbn=978-0-521-27456-2}}</ref>{{rp|3}} Examples of physical properties include [[Physics:Density|density]], [[Physics:Refractive index|index of refraction]], [[Physics:Magnetization|magnetization]] and chemical composition.

The term ''phase'' is sometimes used as a synonym for [[Physics:State of matter|state of matter]], but there can be several [[Chemistry:Miscibility|immiscible]] phases of the same state of matter (as where oil and water separate into distinct phases, both in the liquid state).  It is also sometimes used to refer to the equilibrium states shown on a [[Phase diagram|phase diagram]], described in terms of state variables such as pressure and temperature and demarcated by [[Phase boundary|phase boundaries]]. (Phase boundaries relate to changes in the organization of matter, including for example a subtle change within the solid state from one crystal structure to another, as well as state-changes such as between solid and liquid.)  These two usages are not commensurate with the formal definition given above and the intended meaning must be determined in part from the context in which the term is used.

[[Image:Argon ice 1.jpg|thumb|right|A small piece of rapidly melting [[Chemistry:Argon|argon]] ice shows the transition from solid to liquid.]]

== Types of phases ==
[[File:Iron carbon phase diagram.svg|thumb|left|350px|Iron-carbon [[Phase diagram|phase diagram]], showing the conditions necessary to form different phases]]
Distinct phases may be described as different [[Physics:State of matter|states of matter]] such as [[Physics:Gas|gas]], [[Physics:Liquid|liquid]], [[Physics:Solid|solid]], [[Physics:Plasma|plasma]] or [[Physics:Bose–Einstein condensate|Bose–Einstein condensate]]. Useful [[Physics:Mesophase|mesophase]]s between solid and liquid form other states of matter.

Distinct phases may also exist within a given state of matter. As shown in the diagram for iron alloys, several phases exist for both the solid and liquid states. Phases may also be differentiated based on [[Chemistry:Solubility|solubility]] as in polar (hydrophilic) or non-polar (hydrophobic). A mixture of water (a polar liquid) and oil (a non-polar liquid) will spontaneously separate into two phases. Water has a very low [[Chemistry:Solubility|solubility]] (is insoluble) in oil, and oil has a low solubility in water. Solubility is the maximum amount of a solute that can dissolve in a solvent before the solute ceases to dissolve and remains in a separate phase. A mixture can separate into more than two liquid phases and the concept of phase separation extends to solids, i.e., solids can form [[Physics:Solid solution|solid solution]]s or crystallize into distinct crystal phases. Metal pairs that are mutually soluble can form [[Chemistry:Alloy|alloy]]s, whereas metal pairs that are mutually insoluble cannot.

As many as eight immiscible liquid phases have been observed.{{efn|One such system is, from the top: [[Chemistry:Mineral oil|mineral oil]], [[Chemistry:Silicone oil|silicone oil]], [[Chemistry:Water|water]], [[Chemistry:Aniline|aniline]], perfluoro(dimethylcyclohexane), white phosphorus, [[Chemistry:Gallium|gallium]], and [[Chemistry:Mercury (element)|mercury]]. The system remains indefinitely separated at {{val|45|u=°C}}, where gallium and phosphorus are in the molten state. From {{cite book|author=Reichardt, C.|date=2006|title=Solvents and Solvent Effects in Organic Chemistry|pages=9–10|publisher=Wiley-VCH|isbn=978-3-527-60567-5}}}} Mutually immiscible liquid phases are formed from water (aqueous phase), hydrophobic organic solvents, perfluorocarbons ([[Chemistry:Organofluorine chemistry#Fluorous phases|fluorous phase]]), silicones, several different metals, and also from molten phosphorus. Not all organic solvents are completely miscible, e.g. a mixture of [[Chemistry:Ethylene glycol|ethylene glycol]] and [[Chemistry:Toluene|toluene]] may separate into two distinct organic phases.{{efn|This phenomenon can be used to help with catalyst recycling in [[Chemistry:Heck reaction|Heck vinylation]]. See {{cite journal|author=Bhanage, B.M.|display-authors=0|date=1998|title=Comparison of activity and selectivity of various metal-TPPTS complex catalysts in ethylene glycol — toluene biphasic Heck vinylation reactions of iodobenzene|journal=[[Chemistry:Tetrahedron Letters|Tetrahedron Letters]]|volume=39|issue=51|pages=9509–9512|doi=10.1016/S0040-4039(98)02225-4}}}}

Phases do not need to macroscopically separate spontaneously. [[Chemistry:Emulsion|Emulsion]]s and [[Physics:Colloid|colloid]]s are examples of immiscible phase pair combinations that do not physically separate.
{{clear}}

==Phase equilibrium==
Left to equilibration, many compositions will form a uniform single phase, but depending on the temperature and pressure even a single substance may separate into two or more distinct phases. Within each phase, the properties are uniform but between the two phases properties differ.

Water in a closed jar with an air space over it forms a two-phase system. Most of the water is in the liquid phase, where it is held by the mutual attraction of water molecules. Even at equilibrium molecules are constantly in motion and, once in a while, a molecule in the liquid phase gains enough kinetic energy to break away from the liquid phase and enter the gas phase. Likewise, every once in a while a vapor molecule collides with the liquid surface and condenses into the liquid. At equilibrium, evaporation and condensation processes exactly balance and there is no net change in the volume of either phase.

At room temperature and pressure, the water jar reaches equilibrium when the air over the water has a humidity of about 3%. This percentage increases as the temperature goes up. At 100&nbsp;°C and atmospheric pressure, equilibrium is not reached until the air is 100% water. If the liquid is heated a little over 100&nbsp;°C, the transition from liquid to gas will occur not only at the surface but throughout the liquid volume: the water boils.

==Number of phases==
[[Image:phase-diag2.svg|thumb|right|280px|A typical phase diagram for a single-component material, exhibiting solid, liquid and gaseous phases. The solid green line shows the usual shape of the liquid–solid phase line. The dotted green line shows the anomalous behavior of water when the pressure increases. The triple point and the [[Critical point (thermodynamics)|critical point]] are shown as red dots.]]
For a given composition, only certain phases are possible at a given [[Physics:Temperature|temperature]] and pressure. The number and type of phases that will form is hard to predict and is usually determined by experiment. The results of such experiments can be plotted in [[Phase diagram|phase diagram]]s.

The phase diagram shown here is for a single component system. In this simple system, phases that are possible, depend only on [[Physics:Pressure|pressure]] and [[Physics:Temperature|temperature]]. The markings show points where two or more phases can co-exist in equilibrium. At temperatures and pressures away from the markings, there will be only one phase at equilibrium.

In the diagram, the blue line marking the boundary between liquid and gas does not continue indefinitely, but terminates at a point called the [[Critical point (thermodynamics)|critical point]]. As the temperature and pressure approach the critical point, the properties of the liquid and gas become progressively more similar. At the critical point, the liquid and gas become indistinguishable. Above the critical point, there are no longer separate liquid and gas phases: there is only a generic fluid phase referred to as a [[Physics:Supercritical fluid|supercritical fluid]]. In water, the critical point occurs at around 647 [[Kelvin|K]] (374&nbsp;°C or 705&nbsp;°F) and 22.064 MPa.

An unusual feature of the water phase diagram is that the solid–liquid phase line (illustrated by the dotted green line) has a negative slope. For most substances, the slope is positive as exemplified by the dark green line. This unusual feature of water is related to ice having a lower density than liquid water. Increasing the pressure drives the water into the higher density phase, which causes melting.

Another interesting though not unusual feature of the phase diagram is the point where the solid–liquid phase line meets the liquid–gas phase line. The intersection is referred to as the [[Chemistry:Triple point|triple point]]. At the triple point, all three phases can coexist.

Experimentally, phase lines are relatively easy to map due to the interdependence of temperature and pressure that develops when multiple phases form. Gibbs' phase rule suggests that different phases are completely determined by these variables. Consider a test apparatus consisting of a closed and well-insulated cylinder equipped with a piston. By controlling the temperature and the pressure, the system can be brought to any point on the phase diagram. From a point in the solid stability region (left side of the diagram), increasing the temperature of the system would bring it into the region where a liquid or a gas is the equilibrium phase (depending on the pressure). If the piston is slowly lowered, the system will trace a curve of increasing temperature and pressure within the gas region of the phase diagram. At the point where gas begins to condense to liquid, the direction of the temperature and pressure curve will abruptly change to trace along the phase line until all of the water has condensed.

==Interfacial phenomena==
{{further|Physics:Surface science}}
Between two phases in equilibrium there is a narrow region where the properties are not that of either phase. Although this region may be very thin, it can have significant and easily observable effects, such as causing a liquid to exhibit [[Physics:Surface tension|surface tension]]. In mixtures, some components may preferentially move toward the [[Chemistry:Interface (matter)|interface]]. In terms of modeling, describing, or understanding the behavior of a particular system, it may be efficacious to treat the interfacial region as a separate phase.

==Crystal phases==
A single material may have several distinct solid states capable of forming separate phases. Water is a well-known example of such a material. For example, water [[Earth:Ice|ice]] is ordinarily found in the hexagonal form [[Earth:Ice Ih|ice I<sub>h</sub>]], but can also exist as the cubic [[Earth:Ice Ic|ice I<sub>c</sub>]], the rhombohedral [[Earth:Ice II|ice II]], and many other forms. [[Physics:Polymorphism (materials science)|Polymorphism]] is the ability of a solid to exist in more than one crystal form. For pure chemical elements, polymorphism is known as [[Physics:Allotropy|allotropy]]. For example, [[Chemistry:Diamond|diamond]], [[Chemistry:Graphite|graphite]], and [[Chemistry:Fullerene|fullerene]]s are different allotropes of [[Chemistry:Carbon|carbon]].

==Phase transitions==
{{main|Physics:Phase transition}}
When a substance undergoes a phase transition (changes from one [[Physics:State of matter|state of matter]] to another) it usually either takes up or releases energy. For example, when water evaporates, the increase in kinetic energy as the evaporating molecules escape the attractive forces of the liquid is reflected in a decrease in temperature. The energy required to induce the phase transition is taken from the internal thermal energy of the water, which cools the liquid to a lower temperature; hence evaporation is useful for cooling. See [[Physics:Enthalpy of vaporization|Enthalpy of vaporization]]. The reverse process, condensation, releases heat. The heat energy, or enthalpy, associated with a solid to liquid transition is the [[Physics:Enthalpy of fusion|enthalpy of fusion]] and that associated with a solid to gas transition is the [[Physics:Enthalpy of sublimation|enthalpy of sublimation]].

== Phases out of equilibrium ==
While phases of matter are traditionally defined for systems in thermal equilibrium, work on quantum [[Physics:Many-body localization|many-body localized]] (MBL) systems has provided a framework for defining phases out of equilibrium. MBL phases never reach thermal equilibrium, and can allow for new forms of order disallowed in equilibrium via a phenomenon known as localization protected quantum order. The transitions between different MBL phases and between MBL and thermalizing phases are novel dynamical phase transitions whose properties are active areas of research.

==Notes==
{{noteslist}}

==References==
{{reflist}}

==External links==
* [https://physicsworld.com/a/law-breaking-liquid-defies-the-rules/ French physicists find a solution that reversibly solidifies with a ''rise'' in temperature] – α-[[Chemistry:Cyclodextrin|cyclodextrin]], [[Chemistry:Water|water]], and 4-methylpyridine

{{State of matter}}

[[Category:Engineering thermodynamics]]
[[Category:Condensed matter physics]]
[[Category:Concepts in physics]]
[[Category:Phases of matter| ]]

{{Sourceattribution|Phase (matter)}}