View source for Template:S-line/doc

{{Documentation subpage}}
<!-- PLEASE ADD CATEGORIES AND INTERWIKIS AT THE BOTTOM OF THIS PAGE -->
{{notice|For new systems and systems in need of maintenance, consider using the newer {{tl|Adjacent stations}} instead.}}
{{notice|This template is called by {{tl|s-rail-national}}; an alias. If a change is made which alters/adds parameters names that template must be updated to reflect the new situation.}}

{{notice|If you want to disambiguate a station link but don't want to edit the sub-templates, use the parameters {{para|link1|<var>page name</var>}} (left side) and {{para|link2|<var>page name</var>}} (right side) to temporarily add the correct link. Another editor should correct the relevant succession templates afterwards, and remove the temporary links.}}

''S-line'' is a specialised [[Template:S-start|succession box]] template that links railway station articles. 

'''Note''': this template is called by {{tl|s-rail-national}}; an alias. If a change is made which alters/adds parameters names that template must be updated to reflect the new situation.

===Usage===

S-line must be encased within {{tl|s-rail-start}} and {{tl|s-end}}. The use of {{tl|s-rail}} is highly recommended but not required.

S-line has the following parameters:

{| class="wikitable"
!Parameter!!Description!!Notes
|-
|system||The system to which the line belongs||This should correspond to an entry in [[:Template:S-rail/lines]]
|-
|line||The name of the line||This should be obvious shorthand (e.g. Orange for Orange Line)
|-
|previous||The name of the previous station||
|-
|next||The name of the next station||
|-
|type||The left-hand line branch||''Optional''
|-
|type2||The right-hand line branch||''Optional''
|-
|note||Information about the left-hand line branch||''Optional''
|-
|note2||Information about the right-hand line branch||''Optional''
|-
|notemid||Information about the station itself||''Optional''
|-
|oneway1||Indicates that trains do not operate towards the Previous station||''Optional''
|-
|oneway2||Indicates that trains do not operate towards the Next station||''Optional''
|-
|rows1, hide1||Used to have the Previous Station box cover multiple lines. See below for details.||''Optional''
|-
|rows2, hide2||Used to have the Next Station box cover multiple lines. See below for details.||''Optional''
|-
|rowsmid, hidemid||Used to have the middle (Line) box cover multiple lines. See below for details.||''Optional''
|-
|transfer||Used to show lines available by direct transfer at an adjoining station. See below for details.||''Optional''
|-
|branch||Used to denote specific line branch information, in lieu of or in addition to the <code>type</code> parameters.||''Optional''
|-
|state1, state2||Allows the passing of an additional station parameter. Useful for disambiguation.||''Optional''
|-
|through1, through2||Allows, instead of a next station, service passing to another line on the system.||''Optional''
|}

==Making it work==

S-line depends on sub-templates for the proper display of information. For an example, here are the templates necessary to properly display this box (a version of which is at [[Vauxhall station]]):

{{s-rail-start}}
{{s-rail|title=LUL}}
{{s-line|system=LUL|line=Victoria|previous=Stockwell|next=Pimlico}}
{{s-end}}

First of all, here's the underlying code:

<pre>
{{s-rail-start}}
{{s-rail|title=LUL}}
{{s-line|system=LUL|line=Victoria|previous=Stockwell|next=Pimlico}}
{{s-end}}
</pre>

[[:Template:S-rail-start]] is a variant of the generic template {{tl|s-start}} used to begin thousands of succession boxes. '''Important note:''' No form of start template ({{tl|s-rail-start}} or {{tl|s-start}}) is needed when the succession box is inside the ''service'' parameter of {{tl|Infobox station}}. [[:Template:S-rail]] is used to generate headings for each grouping of rail services in a box. Here we have only one, but some particularly large terminals may have three or four (see [[Union Station (Chicago)]] or [[30th Street Station]]). S-rail uses the translation table at [[:Template:S-rail/lines]]; if the entry is undefined, it simply links the text. Therefore, Amtrak produces [[Amtrak]], while LUL gives [[London Underground]].

You can see that S-line takes only parameters &ndash; no linking necessary! S-line accomplishes this through two assumptions: (1) groups of articles on train stations are named in a predictable manner; (2) redirects are cheap. For S-line to produce the table above five separate templates were defined. Before discussing them, however, let's review the parameters:
* SYSTEM: The company or grouping to which the line belongs. This is case-sensitive and must be consistent. In this case, the value is '''LUL'''.
* LINE: The line name. This is also case-sensitive and must be consistent throughout. Here, we're describing the '''Victoria''' Line.
* PREVIOUS and NEXT: The names of the previous and next stations on the line. Current convention suggests West/East Left/Right, followed by North/South, but your mileage may vary. Whenever possible, succession boxes should make geographic sense (i.e. don't have one line running west-east and the other east-west).

You need templates to define the following things: the formatting/linking of the line, the formatting/linking of the previous and next stations, the display of the line's color, and the display of the appropriate termini &ndash; all automatic.

===Line===

<nowiki>[[Template:{{{SYSTEM}}} lines]]</nowiki> ([[:Template:LUL lines]])

This template carries a translation table for the formatting/linking of the line. The template receives one parameter, <nowiki>{{{1}}}</nowiki> from S-line. With systems that have unusual or non-uniform naming, like Amtrak, it may be necessary to have a test case for every line. When a system has uniform naming, you may be able to get away with a default case and only one or two exceptions, as in [[:Template:LUL lines]]:
<pre>
{{#switch:{{{1}}}
 | #default=[[{{{1}}} Line]]
}}
</pre>

===Station===

<nowiki>[[Template:{{{SYSTEM}}} stations]]</nowiki> ([[:Template:LUL stations]])

This template carries a translation table for the formatting/linking of the line. The template receives two parameters from S-line, <nowiki>{{{station}}}</nowiki> and <nowiki>{{{line}}}</nowiki>, although use of the latter is not often necessary. Station will be either the PREVIOUS or NEXT parameter; both are handled the same way behind the scenes. The easiest way to start the station template is with the default case that reflects how articles on system stations are named. With the London Underground, it's done this way:
<pre> | [[{{{station}}} tube station|{{{station}}}]]</pre>
Therefore, "Bayswater" produces <nowiki>[[Bayswater tube station|Bayswater]]</nowiki>, all linked and ready to go.

===Color===

<nowiki>[[Template:{{{SYSTEM}}} color]]</nowiki> ([[:Template:LUL color]])

This template is designed the same way as the others except that a default case is rare--lines within a system tend to have a different color. Note that some systems don't have a switch statement, because only one color is used. Such a template would consists only of a [[hex code]]. The pound sign is included within s-line so it isn't necessary to add it. This template forces the use of hex codes; no nouns are permitted (e.g. red, white). The template takes one parameter, <nowiki>{{{1}}}</nowiki>.
<pre>
{{#switch:{{lc:{{{1}}}}}
 | bakerloo | bak = a45a2a
 | central | cen = da291c
 | circle | cir = ffcd00
 | chelsea-hackney | c-h = 8cc63e
 | crossrail | cr = {{LCR  color}}
 | crossrail2 | cr2 = e1eb5b
 | district | dis = 007a33
 | east london | ell = ffa300
 | fleet = 414b56
 | hammersmith & city | h&c = e89cae
 | jubilee | jub = 7c878e
 | metropolitan | met = 840b55
 | northern | nor = 000000
 | piccadilly | pic | #default = 10069f
 | victoria | vic = 00a3e0
 | waterloo & city | w&c = 6eceb2

 | docklands light railway | docklands | dlr = {{DLR color}}
 | emirates air line | emirates | eal  = c8102e
 | london overground | overground | log = {{LOG color}}
 | river | riv = 00a3e0
 | tramlink | tl = {{#switch:{{{2}}}
   | 1 = {{tramlink color|1}}
   | 2 = {{tramlink color|2}}
   | 3 = {{tramlink color|3}}
   | 4 = {{tramlink color|4}}
   | #default = {{tramlink color}}
  }}
 | tl1 = {{tramlink color|1}}
 | tl2 = {{tramlink color|2}}
 | tl3 = {{tramlink color|3}}
 | tl4 = {{tramlink color|4}}
 | thameslink = 5c2483
}}
</pre>

===Termini===

<div><nowiki>[[:Template:S-line/{{{SYSTEM}}} left/{{{LINE}}}]]</nowiki> ([[:Template:S-line/LUL left/Victoria]])</div>
<div><nowiki>[[:Template:S-line/{{{SYSTEM}}} right/{{{LINE}}}]]</nowiki> ([[:Template:S-line/LUL right/Victoria]])</div>
These are the all-important templates which produce the "towards..." part of the templates. They can also get pretty tricky depending on the setup. The Victoria line is an easy example. It runs end-to-end from Brixton to Walthamstow Central. Therefore, the "left" (southbound) template contains "Brixton" while the "right" (northbound) template contains "Walthamstow Central". These names are plugged in to the STATION template just as NEXT and PREVIOUS were, with the results that you can see above. A feature of S-line is that if it detects that the next station is the name as the terminus, it will display a note to that effect instead of the destination. Hence,
<pre>
{{s-start}}
{{s-rail|title=LUL}}
{{s-line|system=LUL|line=Victoria|previous=Brixton|next=Vauxhall}}
{{s-end}}
</pre>
'''Produces the box:'''
{{s-start}}
{{s-rail|title=LUL}}
{{s-line|system=LUL|line=Victoria|previous=Brixton|next=Vauxhall}}
{{s-end}}

Now, let's say we've got a more complicated example, like the London Underground's Northern line, which runs from Morden north to one of three destinations: Edgware, Mill Hill East, or High Barnet. The Northern line's "left" template is still a simple line of text &ndash; Morden &ndash; but the "right" template needs a switch statement. The left and right templates receive one parameter, <nowiki>{{{type}}}</nowiki>, from s-line, which tells them which termini to return. Here's a simplified version of the Northern line's "right" template:
<nowiki>
{{#switch:{{{type}}}
 | Edgware=Edgware
 | High Barnet=High Barnet
 | Mill Hill East=Mill Hill East
 | Three=Edgware, Mill Hill East or High Barnet
 | Two=Mill Hill East or High Barnet
 | Kennington=Kennington
}}
</nowiki>
This allows any combination of northbound destinations; depending on which branch the station is on. A default statement is acceptable here if it is true for disproportionate length of the line. In order to make this work properly, you have to define the concepts of "Edgware, Mill Hill East or High Barnet" and "Mill Hill East or High Barnet" in the STATION template, like so:
<pre> | Mill Hill East or High Barnet=[[Mill Hill East tube station|Mill Hill East]] or [[High Barnet tube station|High Barnet]]</pre>
Here's a hypothetical example of this at work:
<pre>
{{s-start}}
{{s-rail|title=LUL}}
{{s-line|system=LUL|line=Northern|previous=Clapham North|next=Oval|type=Morden|type2=Three}}
{{s-end}}
</pre>
'''Produces the box:'''
{{s-start}}
{{s-rail|title=LUL}}
{{s-line|system=LUL|line=Northern|previous=Clapham North|next=Oval|type=Morden|type2=Three}}
{{s-end}}

===One-way operation===

For rail lines that operate in only one direction (such as going around a loop), the ''oneway1'' or ''oneway2'' parameters are used, to indicate that the Previous or Next station, respectively, does not have service going towards it. When these parameters are present with any non-null value, the ''toward [Terminal]'' line is replaced with ''One-way operation''. For example, at [[Heathrow Terminal 4 tube station]]:
<pre>{{s-start}}
{{s-rail|title=LUL}}
{{s-line|system=LUL|line=Piccadilly|next=Heathrow Terminals 2 & 3|branch=Heathrow|rowsmid=2|type=Heathrow 4|rows1=2|notemid=(Terminal 4 loop)}}
{{s-line|system=LUL|line=Piccadilly|type=Heathrow 4|next=Hatton Cross|oneway2=true|hide1=yes|hidemid=yes}}
{{s-end}}</pre>
'''Produces the box:'''
{{s-start}}
{{s-rail|title=LUL}}
{{s-line|system=LUL|line=Piccadilly|next=Heathrow Terminals 2 & 3|branch=Heathrow|rowsmid=2|type=Heathrow 4|rows1=2|notemid=(Terminal 4 loop)}}
{{s-line|system=LUL|line=Piccadilly|type=Heathrow 4|next=Hatton Cross|oneway2=true|hide1=yes|hidemid=yes}}
{{s-end}}

===Circular operation===

Parameters ''circular'' (both sides), ''circular1'' (left cell only) and ''circular2'' (right cell only) are useful for lines that operate in uninterrupted circular manner. These parameters simply hide the word "toward(s)" and then you need to edit the [[:Category:Rail transport succession templates|succession templates]] of that circular line to describe the direction and position of either side. The following example uses ''circular1'' and ''circular2 '' with the terms "Clockwise" and "Counterclockwise":
<pre>{{s-rail-start}}
{{s-rail|title=Walt Disney World Monorail}}
{{s-line|system=WDW Monorail|line=Resort|previous=c|next=p|notemid='''Magic Kingdom'''<br>continuous loop clockwise|oneway1=yes|circular2=yes}}
{{s-line|system=WDW Monorail|line=Express|previous=m|next=m|notemid='''Magic Kingdom'''<br>continuous loop counterclockwise|oneway2=yes|circular1=yes}}
{{s-line|system=WDW Monorail|line=Epcot|next=e}}
{{s-end}}</pre>
'''Produces the box:'''
{{s-rail-start}}
{{s-rail|title=Walt Disney World Monorail}}
{{s-line|system=WDW Monorail|line=Resort|previous=c|next=p|notemid='''Magic Kingdom'''<br>continuous loop clockwise|oneway1=yes|circular2=yes}}
{{s-line|system=WDW Monorail|line=Express|previous=m|next=m|notemid='''Magic Kingdom'''<br>continuous loop counterclockwise|oneway2=yes|circular1=yes}}
{{s-line|system=WDW Monorail|line=Epcot|next=e}}
{{s-end}}

Alternatively, the following example uses ''circular'', and the north american english term "counterclockwise" is interchanged with the commonwealth english term "anticlockwise".

<pre>{{s-rail-start}}
{{s-rail|title=MOSMETRO}}
{{s-line|system=MOSMETRO|line=Koltsevaya|previous=Krasnopresnenskaya|next=Novoslobodskaya|circular=yes}}
{{s-end}}</pre>
'''Produces the box:'''
{{s-rail-start}}
{{s-rail|title=MOSMETRO}}
{{s-line|system=MOSMETRO|line=Koltsevaya|previous=Krasnopresnenskaya|next=Novoslobodskaya|circular=yes}}
{{s-end}}

===Through operation===

When there are different rail services connected on the same line, the ''through1'' or ''through2'' parameters are used to differentiate said services. When these parameters are present with any non-null value, the ''toward [Terminal]'' line is replaced with ''through to [Adjacent line]''. This incorporates the use of ''previous'' and ''next'', with the use of an adjacent line instead of an adjacent station. These parameters are not commonly used, but an example from [[Jamaica station]]:
<pre>{{s-rail-start}}
{{s-rail|title=LIRR}}
{{s-line|system=LIRR|line=City|previous=Kew Gardens|next=Branches|type=Penn Station|rows2=3|rowsmid=3|through2=yes}}
{{s-line|system=LIRR|line=City|previous=Hunterspoint Avenue|next=Branches|type=Long Island City|hide2=yes|hidemid=yes}}
{{s-line|system=LIRR|line=City|previous=East New York|type=Atlantic Terminal|hide2=yes|hidemid=yes}}
{{s-line|system=LIRR|line=Belmont Park|next=Belmont Park|rows1=12|previous=City|through1=yes}}
{{s-line|system=LIRR|line=Hempstead|next=Hollis|hide1=yes}}
{{s-line|system=LIRR|line=Port Jefferson|next=New Hyde Park|hide1=yes}}
{{s-line|system=LIRR|line=Oyster Bay|next=Mineola|hide1=yes}}
{{s-line|system=LIRR|line=Ronkonkoma|next=Mineola|hide1=yes}}
{{s-line|system=LIRR|line=Montauk|next=Mineola|hide1=yes|rowsmid=2}}
{{s-line|system=LIRR|line=Montauk|next=Babylon|hide1=yes|hidemid=yes}}
{{s-line|system=LIRR|line=West Hempstead|next=St. Albans|hide1=yes|rowsmid=2}}
{{s-line|system=LIRR|line=West Hempstead|next=Valley Stream|hide1=yes|hidemid=yes}}
{{s-line|system=LIRR|line=Babylon|next=St. Albans|hide1=yes}}
{{s-line|system=LIRR|line=Far Rockaway|next=Locust Manor|hide1=yes}}
{{s-line|system=LIRR|line=Long Beach|next=Locust Manor|hide1=yes}}
{{s-end}}</pre>
'''Produces the box:'''
{{s-rail-start}}
{{s-rail|title=LIRR}}
{{s-line|system=LIRR|line=City|previous=Kew Gardens|next=Branches|type=Penn Station|rows2=3|rowsmid=3|through2=yes}}
{{s-line|system=LIRR|line=City|previous=Hunterspoint Avenue|next=Branches|type=Long Island City|hide2=yes|hidemid=yes}}
{{s-line|system=LIRR|line=City|previous=East New York|type=Atlantic Terminal|hide2=yes|hidemid=yes}}
{{s-line|system=LIRR|line=Belmont Park|next=Belmont Park|rows1=12|previous=City|through1=yes}}
{{s-line|system=LIRR|line=Hempstead|next=Hollis|hide1=yes}}
{{s-line|system=LIRR|line=Port Jefferson|next=New Hyde Park|hide1=yes}}
{{s-line|system=LIRR|line=Oyster Bay|next=Mineola|hide1=yes}}
{{s-line|system=LIRR|line=Ronkonkoma|next=Mineola|hide1=yes}}
{{s-line|system=LIRR|line=Montauk|next=Mineola|hide1=yes|rowsmid=2}}
{{s-line|system=LIRR|line=Montauk|next=Babylon|hide1=yes|hidemid=yes}}
{{s-line|system=LIRR|line=West Hempstead|next=St. Albans|hide1=yes|rowsmid=2}}
{{s-line|system=LIRR|line=West Hempstead|next=Valley Stream|hide1=yes|hidemid=yes}}
{{s-line|system=LIRR|line=Babylon|next=St. Albans|hide1=yes}}
{{s-line|system=LIRR|line=Far Rockaway|next=Locust Manor|hide1=yes}}
{{s-line|system=LIRR|line=Long Beach|next=Locust Manor|hide1=yes}}
{{s-end}}

===Parallel lines===

For lines that operate on the same tracks and serve the same next station and final terminal, the ''rows1'', ''rows2'', ''hide1'', and ''hide2'' optional parameters can be used to have the Previous (the 1s) or Next (the 2s) Station boxes cover more than one line. The rows parameters specify how many lines the station should cover, while the hide parameters ensure that the table formatting remains intact. The two parameters must be used together, with hide specified for every line that is being covered by the first line. An example of this use can be seen in the preceding CTA box. Note that, in the preceding CTA example, the ''previous'' and ''oneway1'' parameters could have been omitted from the Purple and Pink line entries, but were left in for consistency's sake.

Another example of this:
<pre>{{S-start}}
{{S-rail|title=LUL}}
{{S-line|system=LUL|line=Circle|previous=Westbourne Park|next=Paddington|type2=Aldgate|rows1=2}}
{{S-line|system=LUL|line=Hammersmith & City|previous=Westbourne Park|next=Paddington|hide1=yes}}
{{S-end}}
</pre>
'''Produces the box:'''
{{S-start}}
{{S-rail|title=LUL}}
{{S-line|system=LUL|line=Circle|previous=Westbourne Park|next=Paddington|type2=Aldgate|rows1=2}}
{{S-line|system=LUL|line=Hammersmith & City|previous=Westbourne Park|next=Paddington|hide1=yes}}
{{S-end}}

===Transfers===

The <code>transfer</code> parameter makes it possible to show within the box lines available at a different station with which there's a direct transfer from the current station. This snippet is taken from the article about the [[Finchley Road tube station]]. The [[North London Line]] does not actually serve the station itself, but there's an official out of system transfer designated between [[London Underground]] services at Finchley Road and [[London Overground]] services at the nearby [[Finchley Road & Frognal railway station|Finchley Road & Frognal]] station:
<pre>{{s-start}}
{{s-rail|title=LUL}}
{{s-line|system=LUL|line=Jubilee|previous=West Hampstead|next=Swiss Cottage|type2=one}}
{{s-line|system=LUL|line=Metropolitan|previous=Wembley Park|next=Baker Street|type=Four|rowsmid=2|rows2=2}}
{{s-line|system=LUL|line=Metropolitan|previous=Harrow-on-the-Hill|next=Finchley Road|type=Four|hidemid=yes|hide2=yes|note=Peak periods only}}
{{s-note|text=Out-of-system interchange}}
{{s-rail|title=LOG}}
{{s-line|system=LOG|line=North London|previous=West Hampstead|next=Hampstead Heath|transfer=Finchley Road & Frognal}}
{{s-end}}</pre>
'''Produces the box:'''
{{s-start}}
{{s-rail|title=LUL}}
{{s-line|system=LUL|line=Jubilee|previous=West Hampstead|next=Swiss Cottage|type2=one}}
{{s-line|system=LUL|line=Metropolitan|previous=Wembley Park|next=Baker Street|type=Four|rowsmid=2|rows2=2}}
{{s-line|system=LUL|line=Metropolitan|previous=Harrow-on-the-Hill|next=Finchley Road|type=Four|hidemid=yes|hide2=yes|note=Peak periods only}}
{{s-note|text=Out-of-system interchange}}
{{s-rail|title=LOG}}
{{s-line|system=LOG|line=North London|previous=West Hampstead|next=Hampstead Heath|transfer=Finchley Road & Frognal}}
{{s-end}}

===Branches===

The <code>branch</code> parameter can be used to describe a subset of a <code>line</code>.  In the example hereafter, the <code>branch</code> parameter designates four different parts of the [[Massachusetts Bay Transportation Authority|MBTA]]'s [[Green Line (MBTA)|Green Line]].  When passed to the left and right termini templates, the <code>branch</code> and <code>line</code> parameters identify destinations.  Additionally, the branch name is displayed beneath the line name.

Optionally, <nowiki>[[Template:{{{SYSTEM}}} lines/branches]]</nowiki> may be defined, which allows the linking of the branch parameter.


In this example hereafter, taken from the [[Acton Town tube station]] article, the branch template ([[:Template:LUL lines/branches]]) is defined, allowing branch linking.  Additionally, through the <code>branch</code> parameter, the left and right hand termini are generated.  In some cases, a <code>type</code> parameter can be used to supplement the <code>branch</code> parameter. If necessary, a <code>notemid=</code> parameter can be used to substitute for a <code>branch</code> parameter.

<pre>
{{s-start}}
{{s-rail|title=LUL}}
{{s-line|system=LUL|line=District|previous=Ealing Common|next=Chiswick Park|type=Ealing Broadway|type2=One}}
{{s-line|system=LUL|line=Piccadilly|type=Uxbridge|notemid=[[Piccadilly line#Uxbridge branch|Uxbridge branch]]|previous=Ealing Common|next=Turnham Green|note2=Early morning and late evening service only|rowsmid=2|rows1=2}}
{{s-line|system=LUL|line=Piccadilly|branch=Uxbridge|previous=Ealing Common|next=Hammersmith|hidemid=yes|hide1=yes}}
{{s-line|system=LUL|line=Piccadilly|branch=Heathrow|previous=South Ealing|next=Turnham Green|note2=Early morning and late evening service only|rowsmid=2|rows1=2}}
{{s-line|system=LUL|line=Piccadilly|branch=Heathrow|previous=South Ealing|next=Hammersmith|hidemid=yes|hide1=yes}}
{{s-end}}</pre>
'''Produces the box:'''
{{s-start}}
{{s-rail|title=LUL}}
{{s-line|system=LUL|line=District|previous=Ealing Common|next=Chiswick Park|type=Ealing Broadway|type2=One}}
{{s-line|system=LUL|line=Piccadilly|type=Uxbridge|notemid=[[Piccadilly line#Uxbridge branch|Uxbridge branch]]|previous=Ealing Common|next=Turnham Green|note2=Early morning and late evening service only|rowsmid=2|rows1=2}}
{{s-line|system=LUL|line=Piccadilly|branch=Uxbridge|previous=Ealing Common|next=Hammersmith|hidemid=yes|hide1=yes}}
{{s-line|system=LUL|line=Piccadilly|branch=Heathrow|previous=South Ealing|next=Turnham Green|note2=Early morning and late evening service only|rowsmid=2|rows1=2}}
{{s-line|system=LUL|line=Piccadilly|branch=Heathrow|previous=South Ealing|next=Hammersmith|hidemid=yes|hide1=yes}}
{{s-end}}

===Styles===

<nowiki>[[Template:{{{SYSTEM}}} style]]</nowiki> ([[:Template:Amtrak style]])

The style template allows the modification, at a system level, of display parameters for inter-related templates, including [[:Template:Infobox Station]].

{| class="wikitable"
!Parameter!!Description!!Notes
|-
|lang||Which version of English to output display in. Specify GB for British; the default is US. If '''GB''' is specified, the boxes will say "towards" (station). If '''US''' is specified, the boxes will say "toward" (station).||''Optional; S-line only''
|-
|name_format||Formatting for the <code>{{{name}}}</code> parameter itself||''Optional; Infobox Station only''
|-
|showterm||A "No" value suppresses the display of termini information||''Optional; S-line only''
|-
|stop_noun||Type of stop (e.g. station, tram stop); default is "station"||''Optional; S-rail only''
|-
|thcolor||Font color for table headings||''Optional; Infobox Station only''
|-
|thbgcolor||Background color for table headings||''Optional; Infobox Station only''
|-
|title_nowrap||If "yes", will apply the nowrap style to s-rail headings. Not recommended for use within Infobox Station||''Optional; S-rail only''
|}

===TemplateData===
{{TemplateData header}}
<templatedata>
{
    "description": "S-line is a specialised succession box template that links railway station articles",
    "params": {
        "system": {
            "label": "system",
            "description": "The system to which the line belongs",
            "type": "string",
            "required": true
        },
        "line": {
            "label": "line",
            "description": "The name of the line",
            "type": "string",
            "required": true
        },
        "previous": {
            "label": "previous",
            "description": "The name of the previous station, should correspond to a specific template name",
            "type": "string",
            "required": false
        },
        "next": {
            "label": "next",
            "description": "The name of the next station, should correspond to a specific template name",
            "type": "string",
            "required": false
        },
        "type": {
            "label": "type",
            "description": "The left-hand line branch",
            "type": "string",
            "required": false
        },
        "type2": {
            "label": "type2",
            "description": "The right-hand line branch",
            "type": "string",
            "required": false
        },
        "note": {
            "label": "note",
            "description": "Information about the left-hand line branch",
            "type": "string",
            "required": false
        },
        "notemid": {
            "label": "notemid",
            "description": "Information about the station itself",
            "type": "string",
            "required": false
        },
        "note2": {
            "label": "note2",
            "description": "Information about the right-hand line branch",
            "type": "string",
            "required": false
        },
        "oneway1": {
            "label": "oneway1",
            "description": "Indicates that trains do not operate towards the Previous station",
            "type": "string",
            "required": false
        },
        "oneway2": {
            "label": "oneway2",
            "description": "Indicates that trains do not operate towards the Next station",
            "type": "string",
            "required": false
        },
        "through1": {
            "label": "through1",
            "description": "Allows, instead of a previous station, service passing to another line on the system.",
            "type": "string",
            "required": false
        },
        "through2": {
            "label": "through2",
            "description": "Allows, instead of a next station, service passing to another line on the system.",
            "type": "string",
            "required": false
        },
        "state1": {
            "label": "state1",
            "description": "Allows the passing of an additional station parameter. Useful for disambiguation.",
            "type": "string",
            "required": false
        },
        "state2": {
            "label": "state2",
            "description": "Allows the passing of an additional station parameter. Useful for disambiguation.",
            "type": "string",
            "required": false
        },
        "branch": {
            "label": "branch",
            "description": "Can be used to describe a subset of a line.",
            "type": "string",
            "required": false
        },
        "transfer": {
            "label": "transfer",
            "description": "Used to show lines available by direct transfer at an adjoining station. ",
            "type": "string",
            "required": false
        },
        "round1": {
            "label": "round1",
            "description": "If set displays 'Reverses direction' in left cell",
            "type": "string",
            "required": false
        },
        "round2": {
            "label": "round2",
            "description": "If set displays 'Reverses direction' in right cell",
            "type": "string",
            "required": false
        },
        "circular": {
            "label": "circular",
            "description": "If set hides 'toward' of both sides",
            "type": "string",
            "required": false
        },
        "circular1": {
            "label": "circular1",
            "description": "If set hides 'toward' of left cell only",
            "type": "string",
            "required": false
        },
        "circular2": {
            "label": "circular2",
            "description": "If set hides 'toward' of right cell only",
            "type": "string",
            "required": false
        },
        "rows1": {
            "label": "rows1",
            "description": "Number of rows for left hand column",
            "type": "string",
            "required": false
        },
        "rowsmid": {
            "label": "rowsmid",
            "description": "Number of rows for center hand column",
            "type": "string",
            "required": false
        },
        "rows2": {
            "label": "rows2",
            "description": "Number of rows for right hand column",
            "type": "string",
            "required": false
        },
        "hide1": {
            "label": "hide1",
            "description": "Hides the previous station, used when a previous row has 'rows1' set",
            "type": "string",
            "required": false
        },
        "hidemid": {
            "label": "hidemid",
            "description": "Hides this station, used when a previous row has 'rowsmid' set",
            "type": "string",
            "required": false
        },
        "hide2": {
            "label": "hide2",
            "description": "Hides the next station, used when a previous row has 'rows2' set",
            "type": "string",
            "required": false
        }
    }
}
</templatedata>

===See also===
* {{tiw|s-rail-start}}
* {{tiw|s-rail}}
* {{tiw|s-rail-next}}
* {{tiw|s-note}}
* {{tiw|s-end}}

<includeonly>{{Sandbox other||
<!-- CATEGORIES HERE, THANKS -->
[[Category:Exclude in print]]
[[Category:Rail transport succession templates|{{PAGENAME}}]]
}}</includeonly>