View source for Universal Disk Format

{{short description|Vendor-neutral file system, used in practice for DVDs and other optical discs}}
{{Infobox filesystem
| name                    = UDF
| full_name               = Universal Disk Format
| developer               = [[Organization:International Organization for Standardization|ISO]]/[[Organization:International Electrotechnical Commission|IEC]], Ecma International, [[Organization:Optical Storage Technology Association|OSTA]]
| introduction_os         = 
| introduction_date       = {{Start date and age|1995}}
| partition_id            = Not assigned but suggested:<ref>{{cite web|url=https://serverfault.com/a/829172|title=Serverfault answer for: What is the partition id / filesystem type for UDF?}}</ref><br />{{mono|[[Partition type#PID 07h|0x07]]}} ([[Master boot record|MBR]])<br />{{mono|EBD0A0A2-B9E5-4433-87C0-68B6B72699C7}} ([[GUID Partition Table|GPT]])
| file_struct             = 
| bad_blocks_struct       = 
| max_filename_size       = 255 bytes (path 1023 bytes{{efn|name="note-43"|This restriction might be lifted in newer versions.}})
| max_files_no            = 
| max_volume_size         = 2 [[Tebibyte|TiB]] (with 512-byte sectors), 8 TiB (with 2 KiB sectors, like most optical discs), 16 TiB (with 4 KiB sectors){{efn|2<sup>32</sup> × ''block size''}}<ref>{{cite web |url=https://sites.google.com/site/udfintro/ |title=Wenguang's Introduction to Universal Disk Format (UDF) |at=Section 5.1 Highlight of the UDF Format |date=1 February 2009 |website=Google Sites |access-date=16 July 2014 }}</ref>
| max_file_size           = 16 [[Exbibyte|EiB]]
| filename_character_set  = Any 16-bit [[Unicode]] [[Code point]] excluding U+FEFF and U+FFFE
| dates_recorded          = creation, archive, modification (mtime), attribute modification (ctime), access (atime)<!--double check-->
| date_range              = :24:00:00.000, 1 January 1 (UTC) {{spaced en dash}} 23:59:59.999, 31 December 9999 (UTC) <ref>[https://www.ecma-international.org/wp-content/uploads/ECMA-167_3rd_edition_june_1997.pdf ECMA 167 third edition, June 1997]</ref>
| date_resolution         =[[Microsecond]] 
| forks_streams           = Yes
| attributes              = Various
| file_system_permissions = POSIX
| compression             = No
| directory_struct        = 
| encryption              = 
| OS                      = Various
}}

'''Universal Disk Format''' ('''UDF''') is an [[Open format|open]], vendor-neutral [[File system|file system]] for [[Computer data storage|computer data storage]] for a broad range of media. In practice, it has been most widely used for [[Engineering:DVD|DVD]]s and newer [[Engineering:Optical disc|optical disc]] formats, supplanting [[ISO 9660]]. Due to its design, it is very well suited to incremental updates on both [[Engineering:Write once read many|write-once]] and re-writable [[Engineering:Optical disc|optical media]]. UDF was developed and maintained by the [[Organization:Optical Storage Technology Association|Optical Storage Technology Association]] (OSTA).

In engineering terms, Universal Disk Format is a [[Engineering:Profile (engineering)|profile]] of the specification known as '''ISO/IEC 13346''' and '''ECMA-167'''.<ref name=ecma167>{{cite web |url = http://www.ecma-international.org/publications/files/ECMA-ST/Ecma-167.pdf |title = ECMA-167 – Volume and File Structure for Write-Once and Rewritable Media using Non-Sequential Recording for Information Interchange}}</ref>

== Usage ==
Normally, authoring software will master a UDF file system in a batch process and write it to optical media in a single pass. But when [[Engineering:Packet writing|packet writing]] to rewritable media, such as [[Engineering:CD-RW|CD-RW]], UDF allows files to be created, deleted and changed on-disc just as a general-purpose filesystem would on removable media like [[Floppy disk|floppy disk]]s and [[Engineering:USB flash drive|flash drive]]s. This is also possible on write-once media, such as [[Engineering:CD-R|CD-R]], but in that case the space occupied by the deleted files cannot be reclaimed (and instead becomes inaccessible).

Multi-session mastering is also possible in UDF, though some implementations may be unable to read disks with multiple sessions.{{efn|Multi-session mastering has always been part of the UDF specification. See [UDF 2.01/6.10.1], though earlier documents were not very clear that the anchor offsets are specified to be from the last session.}}

== History ==
{{Optical disc authoring}}

The [[Organization:Optical Storage Technology Association|Optical Storage Technology Association]] standardized the UDF file system to form a common file system for all optical media: both for read-only media and for re-writable optical media. When first standardized, the UDF file system aimed to replace [[ISO 9660]], allowing support for both read-only and writable media. After the release of the first version of UDF, the DVD Consortium adopted it as the official file system for [[Engineering:DVD-Video|DVD-Video]] and DVD-Audio.<ref name="OSTA - UDF Specifications">
{{cite web| url = http://www.osta.org/specs| title = OSTA - UDF Specifications}}</ref>

UDF shares the basic [[ISO 9660#Volume descriptor|volume descriptor]] format with ISO 9660. A "UDF Bridge" format is defined since 1.50 so that a disc can also contain a ISO 9660 file system making references to files on the UDF part.<ref>{{cite web |title=ECMA Technical Report TR/71: DVD Read-Only Disk File System Specifications |url=https://www.ecma-international.org/publications/files/ECMA-TR/ECMA%20TR-071.PDF |date=February 1998}}</ref>

=== Revisions ===

Multiple revisions of UDF have been released:<ref name="OSTA - UDF Specifications"/><ref>{{cite web| url = https://sites.google.com/site/udfintro/| title = Wenguang's Introduction to Universal Disk Format (UDF)}}</ref>
* Revision 1.00{{efn|name="history"|Mentioned only in history of Revision 1.02.}} (24 October 1995). Original Release.
* Revision 1.01{{efn|name="history"}} (3 November 1995). Added DVD Appendix and made a few minor changes.
* Revision 1.02<ref>{{cite web| url = http://www.osta.org/specs/pdf/udf102.pdf| title = OSTA Universal Disk Format Specification Revision 1.02}}</ref> (30 August 1996). This format is used by [[Engineering:DVD-Video|DVD-Video]] discs.
* Revision 1.50<ref>{{cite web| url = http://www.osta.org/specs/pdf/udf150.pdf| title = OSTA Universal Disk Format Specification Revision 1.50}}</ref> (4 February 1997). Added support for (virtual) rewritability on CD-R/DVD-R media by introducing the VAT structure. Added sparing tables for defect management on rewritable media such as CD-RW, and DVD-RW and DVD+RW. Add UDF bridge.
* Revision 2.00<ref>{{cite web| url = http://www.osta.org/specs/pdf/udf200.pdf| title = OSTA Universal Disk Format Specification Revision 2.00}}</ref> (3 April 1998). Added support for Stream Files and real-time files (for DVD recording) and simplified directory management. VAT support was extended.
* Revision 2.01<ref>{{cite web| url = http://www.osta.org/specs/pdf/udf201.pdf| title = OSTA Universal Disk Format Specification Revision 2.01}}</ref> (15 March 2000) is mainly a bugfix release to UDF 2.00. Many of the UDF standard's ambiguities were resolved in version 2.01.
* Revision 2.50<ref>{{cite web| url = http://www.osta.org/specs/pdf/udf250.pdf| title = OSTA Universal Disk Format Specification Revision 2.50}}</ref> (30 April 2003). Added the Metadata Partition facilitating metadata clustering, easier crash recovery and optional duplication of file system information: All metadata like nodes and directory contents are written on a separate partition which can optionally be mirrored. This format is used by some versions of Blu-rays and most HD-DVD discs.
* Revision 2.60<ref name=udf260p>{{cite web| url = http://www.osta.org/specs/pdf/udf260.pdf| title = OSTA Universal Disk Format Specification Revision 2.60}}</ref> (1 March 2005). Added Pseudo OverWrite method for drives supporting pseudo overwrite capability on sequentially recordable media. Has read-only compatibility with UDF 2.50 implementations.{{rp|10}} (Some [[Engineering:Blu-ray|Blu-ray]]s use this format.)

UDF Revisions are internally encoded as [[Binary-coded decimal|binary-coded decimal]]s; Revision 2.60, for example, is represented as {{mono|0x0260}}.<ref name=udf260p/>{{rp|23}} In addition to declaring its own revision, compatibility for each volume is defined by the minimum read and minimum write revisions, each signalling the requirements for these operations to be possible for every structure on this image. A "maximum write" revision additionally records the highest UDF support level of all the implementations that has written to this image.<ref name=udf260p/>{{rp|34}} For example, a UDF 2.01 volume that does not use Stream Files (introduced in UDF 2.00) but uses VAT (UDF 1.50) created by a UDF 2.60-capable implementation may have the revision declared as {{mono|0x0201}}, the minimum read revision set to {{mono|0x0150}}, the minimum write to {{mono|0x0150}}, and the maximum write to {{mono|0x0260}}.

== Specifications ==
The UDF standard defines three [[File system|file system]] variations, called "builds". These are:
* ''Plain'' (Random Read/Write Access). This is the original format supported in all UDF revisions
* ''Virtual Allocation Table'', also known as  ''VAT'' (Incremental Writing). Used specifically for writing to write-once media
* ''Spared'' (Limited Random Write Access). Used specifically for writing to rewritable media

=== Plain build ===
Introduced in the first version of the standard, this format can be used on any type of disk that allows random read/write access, such as hard disks, DVD+RW and [[Engineering:DVD-RAM|DVD-RAM]] media.  Metadata (up to v2.50) and file data is addressed more or less directly.  In writing to such a disk in this format, any physical block on the disk may be chosen for allocation of new or updated files.

Since this is the ''basic'' format, practically any operating system or file system driver claiming support for UDF should be able to read this format.

=== VAT build ===
Write-once media such as DVD-R and [[Engineering:CD-R|CD-R]] have limitations when being written to, in that each physical block can only be written to once, and the writing must happen incrementally. Thus the ''plain'' build of UDF can only be written to CD-Rs by pre-mastering the data and then writing all data in one piece to the media, similar to the way an [[ISO 9660]] file system gets written to CD media.

To enable a CD-R to be used virtually like a hard disk, whereby the user can add and modify files on a CD-R at will (so-called "drive letter access" on Windows), OSTA added the ''VAT'' build to the UDF standard in its revision 1.5. The VAT is an additional structure on the disc that allows [[Engineering:Packet writing|packet writing]]; that is, remapping physical blocks when files or other data on the disc are modified or deleted. For write-once media, the entire disc is virtualized, making the write-once nature transparent for the user; the disc can be treated the same way one would treat a rewritable disc.

The write-once nature of CD-R or DVD-R media means that when a file is deleted on the disc, the file's data still remains on the disc. It does not appear in the directory any more, but it still occupies the original space where it was stored. Eventually, after using this scheme for some time, the disc will be full, as free space cannot be recovered by deleting files. Special tools can be used to access the previous state of the disc (the state before the delete occurred), making recovery possible.

Not all drives fully implement version 1.5 or higher of the UDF, and some may therefore be unable to handle VAT builds.

=== Spared (RW) build ===
Rewriteable media such as DVD-RW and [[Engineering:CD-RW|CD-RW]] have fewer limitations than DVD-R and CD-R media. Sectors can be rewritten at random (though in packets at a time). These media can be erased entirely at any time, making the disc blank again, ready for writing a new UDF or other file system (e.g., ISO 9660 or CD Audio) to it. However, sectors of ''-RW'' media may "wear out" after a while, meaning that their data becomes unreliable, through having been rewritten too often (typically after a few hundred rewrites, with CD-RW).

The plain and VAT builds of the UDF format can be used on rewriteable media, with some limitations. If the plain build is used on a -RW media, file-system level modification of the data must not be allowed, as this would quickly wear out often-used sectors on the disc (such as those for directory and block allocation data), which would then go unnoticed and lead to data loss. To allow modification of files on the disc, rewriteable discs can be used like -R media using the ''VAT'' build. This ensures that all blocks get written only once (successively), ensuring that there are no blocks that get rewritten more often than others. This way, a RW disc can be erased and reused many times before it should become unreliable. However, it will eventually become unreliable with no easy way of detecting it. When using the ''VAT'' build, CD-RW/DVD-RW media effectively appears as CD-R or DVD+/-R media to the computer. However, the media may be erased again at any time.

The ''spared'' build was added in revision 1.5 to address the particularities of rewriteable media. This build adds an extra ''Sparing Table'' in order to manage the defects that will eventually occur on parts of the disc that have been rewritten too many times. This table keeps track of worn-out sectors and remaps them to working ones. UDF defect management does not apply to systems that already implement another form of defect management, such as [[Mount Rainier (packet writing)|Mount Rainier]] (MRW) for optical discs, or a disk controller for a hard drive.

The tools and drives that do not fully support revision 1.5 of UDF will ignore the sparing table, which would lead them to read the outdated worn-out sectors, leading to retrieval of corrupted data.

An [[Overhead (computing)|overhead]] that is spread over the entire disc reserves a portion of the data storage space, limiting the useable capacity of a [[Engineering:CD-RW|CD-RW]] with e.g. 650 MB of original capacity to around 500 MB.<ref name=PC-Thompson>{{cite book| url = https://books.google.com/books?id=kG8LcWfruOAC&pg=PT242 |title = ''"PC Hardware in a Nutshell: A Desktop Quick Reference"'' by Robert Bruce Thompson, Barbara Fritchman Thompson (2003) −– Chapter 11 (starting page 340): CD writers| isbn = 9780596552343| last1 = Thompson| first1 = Robert Bruce| last2 = Thompson| first2 = Barbara Fritchman| date = 24 July 2003| publisher="O'Reilly Media, Inc." }}</ref>

== Character set ==

The UDF specifications<ref name="OSTA - UDF Specifications"/> allow only one Character Set ''OSTA CS0'', which can store any [[Unicode]] [[Code point]] excluding U+FEFF and U+FFFE. Additional character sets defined in ECMA-167 are not used.<ref name=ecma167/>{{rp|at=7.2}}

Since Errata DCN-5157, the range of code points was expanded to all code points from Unicode 4.0 (or any newer or older version), which includes [[Plane (Unicode)#Supplementary Multilingual Plane|Plane]] 1-16 characters such as [[Emoji]]. DCN-5157 also recommends [[Unicode equivalence#Normalization|normalizing]] the strings to Normalization Form C.<ref name=dcn-5157>{{cite web|title=UDF 2.60 approved errata|url=http://www.osta.org/specs/pdf/udf260_errata.pdf|access-date=22 April 2018}}</ref>

The OSTA CS0 character set stores a 16-bit Unicode string "compressed" into 8-bit or 16-bit units, preceded by a single-byte "compID" tag to indicate the compression type. The 8-bit storage is functionally equivalent to ISO-8859-1, and the 16-bit storage is [[UTF-16]] in big endian. The reference algorithm neither checks for forbidden code points nor interprets [[Universal Character Set characters#Surrogates|surrogate pairs]], so like [[NTFS]] the string may be malformed.<ref name="OSTA - UDF Specifications"/>{{rp|at=2.1.2, 6.4}} (No specific form of storage is specified by DCN-5157, but UTF-16BE is the only well-known method for storing all of Unicode while being mostly backward compatible with UCS-2.)<ref name=dcn-5157/>

== Compatibility ==
Many [[Engineering:DVD player|DVD player]]s do not support any UDF revision other than version 1.02. Discs created with a newer revision may still work in these players if the ISO 9660 bridge format is used. Even if an [[Operating system|operating system]] claims to be able to read UDF 1.50, it still may only support the ''plain'' build and not necessarily either the ''VAT'' or ''Spared'' UDF builds.

[[Software:MacOS|Mac OS X]] 10.4.5 claims to support Revision 1.50 (see ''man mount_udf''), yet it can only mount disks of the ''plain'' build properly and provides no virtualization support at all. It cannot mount UDF disks with VAT, as seen with the Sony Mavica issue.<ref>{{cite web |url=http://support.apple.com/kb/TA26938?viewlocale=en_US |title=Sony Mavica UDF Compatibility Issue |date=19 February 2012 |website=Apple |access-date=16 July 2014 |url-status=dead |archive-url=https://web.archive.org/web/20120426172237/http://support.apple.com/kb/TA26938?viewlocale=en_US |archive-date=April 26, 2012}}</ref><ref>{{cite web |url=http://freecode.com/projects/udfmediareader |title=Mac OS X UDF Compatibility Issues |author=<!--Staff writer(s); no by-line.--> |date=11 July 2012 |website=Free(code) |access-date=16 July 2014}}</ref> Releases before 10.4.11 mount disks with Sparing Table but does not read its files correctly. Version 10.4.11 fixes this problem.<ref>{{cite web |url=https://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdateintel.html |title=Intel Update |date=14 November 2007 |website=Apple |access-date=16 July 2014 |url-status=dead |archive-url=https://web.archive.org/web/20100328145428/http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdateintel.html |archive-date=March 28, 2010}}</ref><ref>{{cite web |url=https://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdateppc.html |title=PowerPC Update |date=14 November 2007 |website=Apple |access-date=16 July 2014 |url-status=dead |archive-url=https://web.archive.org/web/20100531005641/http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdateppc.html |archive-date=May 31, 2010}}</ref>

Similarly, [[Software:Windows XP|Windows XP]] Service Pack 2 (SP2) cannot read DVD-RW discs that use the UDF 2.00 sparing tables as a defect management system.<ref>{{cite web |url=http://support.microsoft.com/kb/321640/en-us |title=Microsoft Windows UDF Read Troubleshooting |publisher=microsoft.com}}</ref> This problem occurs if the UDF defect management system creates a sparing table that spans more than one sector on the DVD-RW disc. Windows XP SP2 can recognize that a DVD is using UDF, but Windows Explorer displays the contents of a DVD as an empty folder. A hotfix is available for this<ref>{{cite web |url=http://support.microsoft.com/kb/899527 |title=Windows XP UDF hotfix |publisher=microsoft.com}}</ref> and is included in Service Pack 3.<ref>{{cite web |url=http://support.microsoft.com/kb/321640/en-us |title=MS Windows and UDF optical discs}}</ref>

Due to the default UDF versions and options, a UDF partition formatted by Windows cannot be written under macOS. On the other hand, a partition formatted by macOS cannot be directly written by Windows, due to the requirement of a [[Master boot record|MBR]] partition table. In addition, Linux only supports writing to UDF 2.01. A script for Linux and macOS called {{code|format-udf}} handles these incompatibilities by using UDF 2.01 and adding a fake MBR;<ref>{{cite web |title=JElchison/format-udf: Bash script to format a block device (hard drive or Flash drive) in UDF |url=https://github.com/JElchison/format-udf |website=GitHub |date=27 June 2020 |quote=The output is a drive that can be used for reading/writing across multiple operating system families: Windows, macOS, and Linux. This script should be capable of running in macOS or in Linux.}}</ref> for Windows the best solution is using the command-line tool {{code|format /FS:UDF /R:2.01}}.

{| class="wikitable sortable"
|+ Table of operating systems
| colspan=10 | 
* Unless otherwise noted, read and write support means that only the plain UDF build is supported, but not the VAT and spared build.
* Support for "read" means that a UDF formatted disk can be mounted by the system. It enables the user to read files from the UDF volume using the same interface that is used to access files on other disks connected to the computer.
* Support for "write" means that, in addition to reading files from a mounted UDF volume, data such as files can be modified, added, or deleted.
|-
!
! colspan="5" | UDF revision (read + write)
! colspan="2" | Non-plain
!
|-
! Operating system
! 1.02
! 1.50
! 2.0x
! 2.50
! 2.60
! VAT
! Sparing tables
! Note
|-
| AIX 5.2, 5.3, 6.1
|
| {{yes}}
| {{yes}}
| {{no}}
| {{no}}
|
|
| 1.5 is default<ref>{{cite web |url=http://publib.boulder.ibm.com/infocenter/aix/v6r1/index.jsp |title=Welcome to the AIX 6.1 Information Center |publisher=IBM |access-date=25 September 2010}}</ref>
|-
| [[Software:AmigaOS|AmigaOS]] 4.0
| {{yes}}
| {{yes}}
|
|
|
|
|
|
|-
| [[Software:BeOS|BeOS]]/[[Software:Magnussoft ZETA|magnussoft ZETA]]/[[Software:Haiku (operating system)|Haiku]]
| {{yes}}
| {{yes}}
| {{yes}}
| {{yes}}
| {{yes}}
|
|
|
|-
| OS/2 (including [[Software:EComStation|eComStation]] and [[Software:ArcaOS|ArcaOS]])
|
|
| {{yes}}
|
|
|
|
| Additional fee drivers on OS/2.
|-
| [[Software:FreeBSD|FreeBSD]] 5.0 and newer
| {{partial|read only}}
| {{partial|read only}}<ref>{{cite web |title=FreeBSD 5.0-RELEASE Release Notes |url=https://www.freebsd.org/releases/5.0R/relnotes-i386.html#AEN1150}}</ref>
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| {{yes}}
|
|-
| [[Software:Linux kernel|Linux kernel]] 2.2
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
|
|-
| [[Software:Linux kernel|Linux kernel]] 2.4
| {{yes}}
| {{yes}}
| {{yes}}{{efn|name="linux24"|Linux version 2.3.17–2.4.5 supports only UDF revision up to 2.00, Linux version 2.4.6 and newer supports also UDF revision 2.01.}}
| {{no}}
| {{no}}
| {{yes}}
| {{yes}}
|
|-
| [[Software:Linux kernel|Linux kernel]] 2.6.0–2.6.25
| {{yes}}
| {{yes}}
| {{yes}}
| {{no}}
| {{no}}
| {{yes}}
| {{yes}}
| Kernel versions prior to 2.6.10 supported fewer media types.
|-
| [[Software:Linux kernel|Linux kernel]] 2.6.26 and newer
| {{yes}}
| {{yes}}
| {{yes}}
| {{partial|read only}}<ref name="linuxsrc">{{cite web
    | title = Linux 3.13: fs/udf/udf_sb.h
    | url = https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/fs/udf/udf_sb.h?id=v3.13#n11
    | date = 2013-09-24
    | access-date = 2014-01-29}}</ref>
| {{partial|read only}}<ref name=udf260p/>{{rp|10}}
| {{yes}}
| {{yes}}
| Permission-related mounting options added in 2.6.30.<ref>{{cite web
    | title = Linux 2.6.30 Changelog
    | url = http://kernelnewbies.org/Linux_2_6_30
    | date = 2009-06-12
    | access-date = 2015-09-13}}</ref> Auto-detection of UDF file system on hard disk is supported since version 2.6.30. Auto-detection of UDF file system on disk images was fixed in 4.11.
|-
| [[Software:Mac OS 8#Mac OS 8.1|Mac OS 8.1]]–[[Software:Mac OS 8#Mac OS 8.5|8.5]]
| {{yes}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| Some earlier versions of Mac OS, such as [[Software:System 7|7.5, 7.6]], and 8.0 are also supported via third-party utilities, along with additional UDF version support for 8.1 and 8.5.{{efn|name="MacOSExtraUDF"|Read and (depending on which utility is used) write support for UDF versions 1.02, 1.50, 2.00, and 2.01 (support for 1.50 is not natively present in 8.1 or 8.5, and 2.00 onwards was not supported by the classic Mac OS at all) on optical disks available with third party utilities such as [[Company:Adaptec|Adaptec]]'s UDF Volume Access or Software Architects' DVD-RAM Tune-Up utilities.}}
|-
| [[Software:Mac OS 8#Mac OS 8.6|Mac OS 8.6]], [[Software:Mac OS 9|Mac OS 9]]
| {{yes}}
| {{yes}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| Additional UDF version support via third-party utilities.{{efn|name="MacOSExtraUDF"}}
|-
| [[Software:Mac OS X|Mac OS X]] 10.0–10.3
| {{yes}}
| {{yes}}<ref name="macmount103">{{cite web |title=mount_udf manpage for Mac OS X 10.3 |url=http://www.manpagez.com/man/8/mount_udf/osx-10.3.php |quote=UDF 1.50 is supported. UDF 2.0 and later is not.}}</ref>
| {{no}}<ref name="macmount103" />
| {{no}}
| {{no}}
| {{no}}
| {{no}}
|
|-
| [[Software:Mac OS X|Mac OS X]] 10.4
| {{yes}}
| {{yes}}
| {{yes}}
| {{no}}{{efn|Support via third party utility [[Software:Roxio Toast|Toast]] 9+ [http://www.roxio.com/enu/products/toast9/plugin/overview.html HD Plugin]}}<ref name="macrec" />
| {{no}}{{efn|Support via third party utility Toast 9+}}
| {{no}}
| {{yes}}{{efn|Since version 10.4.11}}
| Can create UDF 1.50 (plain build) volumes using the <code>drutil</code> utility.
|-
| Mac OS X 10.5 and newer
| {{yes}}
| {{yes}}
| {{yes}}
| {{yes}}<ref name="macmount105">{{cite web |title=mount_udf manpage for Mac OS X 10.5 |url=http://www.manpagez.com/man/8/mount_udf/osx-10.5.php |quote=Reading of all UDF revisions (1.02 - 2.60) on both block device (e.g. hard drives and USB drives) and most optical media is supported. Writing to block devices, DVD-RW and DVD+RW is supported with the following exceptions: (1) Cannot write Finder Info, Resource Fork, or other extended attributes in UDF volumes of revision 1.02 and 1.50; (2) Cannot write to mirrored metadata partition.}}</ref><ref name="macrec">{{cite web |title=Disc Recording Release Notes for OS X v10.5 |url=https://developer.apple.com/library/content/releasenotes/MusicAudio/RN-DiscRecording/index.html |quote=This release note describes changes to the Disc Recording frameworks from OS X version 10.4. The Disc Recording content creation engine now supports writing UDF 2.0 discs in addition to UDF 1.02 and 1.5.}}</ref>
| {{partial|read only}}<ref name="macmount105" /><ref name="mactech">{{cite web |title=Mac Technology Overview - Kernel and Device Drivers Layer |url=https://developer.apple.com/library/content/documentation/MacOSX/Conceptual/OSX_Technology_Overview/SystemTechnology/SystemTechnology.html |quote=OS X supports reading UDF revisions 1.02 through 2.60 on both block devices and most optical media, and it supports writing to block devices and to DVD-RW and DVD+RW media using UDF 2.00 through 2.50 (except for mirrored metadata partitions in 2.50).}}</ref>
| {{yes}}
| {{yes}}
| To create, use <code>newfs_udf</code> utility.
|-
| [[Software:NetBSD|NetBSD]] 4.0
| {{partial|read only}}<ref>{{cite web |url=https://www.netbsd.org/releases/formal-4/NetBSD-4.0.html |title=Announcing NetBSD 4.0 |quote=Added UDF support for optical media and block devices, see mount_udf(8). Read-only for now.}}</ref>
| {{partial|read only}}
| {{partial|read only}}
| {{partial|read only}}
| {{partial|read only}}
| {{yes}}
| {{yes}}
| Reading multi-session VAT, spared and metapartition variants<br> from all CD, DVD and BD variants as well as HDD and Flash media.
|-
| [[Software:NetBSD|NetBSD]] 5.0
| {{yes}}
| {{yes}}
| {{yes}}
| {{yes}}
| {{yes}}
| {{yes}}
| {{yes}}
| Write support for all builds and media including multi-session VAT.<ref>{{cite web |url=http://www.netbsd.org/releases/formal-5/NetBSD-5.0.html |title=NetBsd 5 release notes |publisher=NetBSD}}</ref> Create new with <code>newfs_udf</code>.<br>Limited writing on 2.50/2.60 (due to needing pre-allocated, fixed sized metadata partition).<ref>{{cite web |url=http://netbsd.gw.com/cgi-bin/man-cgi?mount_udf+8+NetBSD-5.0 |title=NetBSD System Manager's Manual |access-date=25 September 2010}}</ref>
|-
| [[Software:NetWare|NetWare]] 5.1
|
|
|
|
|
|
|
|
|-
| NetWare 6
|
|
|
|
|
|
|
|
|-
| [[Organization:OpenBSD|OpenBSD]] 3.8–3.9
| {{partial|read only}}<ref>{{cite web |url=https://www.openbsd.org/38.html|title=OpenBSD 3.8}}</ref>
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
|
|-
| [[Organization:OpenBSD|OpenBSD]] 4.0–4.6
| {{partial|read only}}
| {{partial|read only}}<ref name="openbsd40">{{cite web |url=https://www.openbsd.org/40.html |title=OpenBSD 4.0}}</ref>
| {{no}}
| {{no}}
| {{no}}
| {{yes}}<ref name="openbsd40" />
| {{no}}
|
|- 
| [[Organization:OpenBSD|OpenBSD]] 4.7
| {{partial|read only}}
| {{partial|read only}}
| {{partial|read only}}
| {{partial|read only}}<ref name="openbsd47">{{cite web |url=http://www.openbsd.org/47.html |title=The OpenBSD 4.7 Release |publisher=OpenBSD |access-date=25 September 2010}}
</ref>
| {{partial|read only}}<ref name="openbsd47"/>
| {{yes}}
| {{yes}}
|
|- 
| [[Software:Solaris (operating system)|Solaris]] 7 11/99+
| {{yes}}
| {{yes}}
|
|
|
|
|
|
|-
| Solaris 8/9/10
| {{yes}}
| {{yes}}
|
|
|
|
|
|
|-
| [[Engineering:DOS|DOS]], [[Software:FreeDOS|FreeDOS]], Windows 3.11, [[Software:Windows 95|Windows 95]], [[Software:Windows 95#Editions|Windows 95 OSR2+]] and other DOS based OS
| {{no}}<ref name="msfscc">{{cite web |url=https://msdn.microsoft.com/en-us/library/cc232128.aspx |title=[MS-FSCC]: File System Control Codes: 6 Appendix B: Product Behavior|date=27 April 2022 }} Windows UDF File System Support table</ref>
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| No native support. Filesystems that have an ISO9660 backward compatibility structure can be read.
|-
| [[Software:Windows 98|Windows 98]], [[Software:Windows Me|Windows Me]]
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| Additional read/write support via third party utilities{{efn|name="win3rd"|Read and write support for other UDF versions on optical disks available with third party utilities such as [[Software:Drive Letter Access|DLA]], [[Software:InCD|InCD]] or Toshiba/Panasonic/Matsushita UDF 2.5 driver. Read and write support for removable disks and hard disks available with third party utilities such as SAI's WriteUDF!.}}
|-
| [[Software:Windows 2000|Windows 2000]]
| {{partial|read only}}<ref name="nt5dll" /><ref name="inside2000">{{cite book|last1=Russinovich|first1=M. E.|last2=Solomon|first2=D. A.|title=Inside Microsoft Windows 2000|chapter-url=https://archive.org/details/insidemicrosoftw0000solo|chapter-url-access=registration|edition=Third|year=2000|publisher=Microsoft Press|location=Redmond, Washington|isbn=978-0-7356-1021-7|chapter=Chapter 12 - File Systems|quote=The Windows 2000 UDF file system implementation is ISO 13346-compliant and supports UDF versions 1.02 and 1.5. ... the Windows 2000 UDF driver (Udfs.sys) provides read-only support.}}</ref><ref name="winint4">{{cite book|last1=Russinovich|first1=M. E.|last2=Solomon|first2=D. A.|title=Microsoft Windows Internals, Fourth Edition: Microsoft Windows Server 2003, Windows XP, and Windows 2000|url=https://books.google.com/books?id=I2vjPx-6qK0C|edition=Fourth|year=2005|publisher=Microsoft Press|location=Redmond, Washington|isbn=0-7356-1917-4|page=691|chapter=Chapter 12 - File Systems|quote=The UDF driver supports UDF versions 1.02, version 1.5 on Windows 2000, and versions 2.0 and 2.01 on Windows XP and Windows Server 2003. ... the Windows UDF driver (Udfs.sys) provides read-only support. Windows does not implement support for other UDF features, including named streams, access control lists, or extended attributes.}}</ref><ref name="locfswin">{{cite report|author=WinHEC 2004 Version|date=May 5, 2004|section-url=http://download.microsoft.com/download/5/b/5/5b5bec17-ea71-4653-9539-204a672f11cf/locfilesys.doc|title=Local File Systems for Windows|publisher=Microsoft Corporation|pages=6–8|chapter=2.3 About the UDF File System|chapter-format=doc}}</ref><ref name="msfscc" />
| {{partial|read only}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| {{no}}
| Additional read/write support via third party utilities{{efn|name="win3rd"}}
|-
| [[Software:Windows XP|Windows XP]]/[[Software:Windows Server 2003|Server 2003]]
| {{partial|read only}}<ref name="winint4" /><ref name="locfswin" /><ref name="msfscc" />
| {{partial|read only}}
| {{partial|read only}}
| {{no}}
| {{no}}
| {{yes}}
| {{yes}}{{efn|Service Pack 3 required}}
| Additional read/write support via third party utilities{{efn|name="win3rd"}}
|-
| [[Software:Windows Vista|Windows Vista]]
| {{yes}}<ref name="winint5">{{cite book|last1=Russinovich|first1=M. E.|last2=Solomon|first2=D. A.|last3=Ionescu|first3=A.|title=Windows Internals, 5th Edition: Windows Vista and Windows Server 2008|edition=5th|year=2009|publisher=Microsoft Press|location=Redmond, Washington|isbn=978-0-7356-3796-2
|page=981|chapter=Chapter 12 - File Systems|url=https://books.google.com/books?id=VgjAQjsc6g8C|quote=The UDF driver supports UDF versions up to 2.60. The Windows UDF driver (Udfs.sys) provides read-write support ... when using UDF 2.50 and read-only support when using UDF 2.60. However, Windows does not implement support for certain UDF features such as named streams and access control lists.}}</ref><ref name="winint6">{{cite book |last1=Russinovich |first1=M. E.|last2=Solomon |first2=D. A. |last3=Ionescu 
|first3=A. |title=Windows Internals, Part 2, 6th Edition: Windows 7 and Windows Server 2008 R2|edition=6th |year=2012 |publisher=Microsoft Press |location=Redmond, Washington |isbn=978-0-7356-6587-3
|page=393 |chapter=Chapter 12 - File Systems |url=https://books.google.com/books?id=_Y2WiG6WfGkC|quote=The UDF driver supports UDF versions up to 2.60. The Windows UDF driver (Udfs.sys) provides read-write support ... when using UDF 2.50 and read-only support when using UDF 2.60. However, Windows does not implement support for certain UDF features such as named streams and access control lists.}}</ref><ref name="locfswin" /><ref name="msfscc" />
| {{yes}}
| {{yes}}
| {{yes}}
| {{partial|read only}}<ref name="winint5" /><ref name="winint6" /><ref name="locfswin" /><ref name="msfscc" />
| {{yes}}
| {{yes}}
| Referred to by Microsoft as [[Live File System]]. Requires fake MBR partition on non-optical devices.
|-
| [[Software:Windows 7|Windows 7]] and newer
| {{yes}}<ref name="msfscc" />
| {{yes}}
| {{yes}}
| {{yes}}
| {{yes}}
| {{yes}}
| {{yes}}
| 
|-
! Operating system
! 1.02
! 1.50
! 2.0x
! 2.50
! 2.60
! VAT
! Sparing tables
! Note
|-
!
! colspan="5" | UDF revision (read + write)
! colspan="2" | Non-plain
!
|}

== See also ==

* [[Software:Comparison of file systems|Comparison of file systems]]
* DVD authoring
* ISO/IEC 13490

== Notes ==
{{notelist}}

== References ==

{{reflist|30em}}

== Further reading ==

* ISO/IEC 13346 standard, also known as [http://www.ecma-international.org/publications/files/ECMA-ST/Ecma-167.pdf ECMA-167].

== External links ==
*[http://www.osta.org/ OSTA home page]
*UDF specifications: [http://www.osta.org/specs/pdf/udf102.pdf 1.02], [http://www.osta.org/specs/pdf/udf150.pdf 1.50], [http://www.osta.org/specs/pdf/udf200.pdf 2.00], [http://www.osta.org/specs/pdf/udf201.pdf 2.01], [http://www.osta.org/specs/pdf/udf250.pdf 2.50], [http://www.osta.org/specs/pdf/udf260.pdf 2.60] (March 1, 2005), [http://www.osta.org/specs/pdf/SecureUDF_1_00.pdf SecureUDF]
*[http://sites.google.com/site/udfintro/ Wenguang Wang's UDF Introduction]
*[http://sourceforge.net/projects/linux-udf/ Linux UDF support]
*[http://support.microsoft.com/kb/321640/en-us Microsoft Windows UDF Read Troubleshooting]
*[http://publib.boulder.ibm.com/infocenter/systems/index.jsp?topic=/com.ibm.aix.baseadmn/doc/baseadmndita/cdromudfs.htm AIX - CD-ROM file system and UDFS]
{{Filesystem}}
{{Ecma International Standards}}
{{List of International Electrotechnical Commission standards}}

[[Category:Disk file systems]]
[[Category:ISO standards]]
[[Category:IEC standards]]
[[Category:Ecma standards]]
[[Category:Windows components]]

{{Sourceattribution|Universal Disk Format}}