Oscillator start-up timer
From HandWiki
Revision as of 08:20, 10 May 2022 by imported>Smart bot editor (correction)
An oscillator start-up timer (OST) is a module used by some microcontrollers to keep the device reset until the crystal oscillator is stable. When a crystal oscillator starts up, its frequency is not constant, which causes the clock frequency to be non-constant. This would cause timing errors, leading to many problems. An oscillator start-up timer ensures that the device only operates when the oscillator generates a stable clock frequency.[1][2] The PIC microcontroller's oscillator start-up timer holds the device's reset for a 1024-oscillator-cycle delay to allow the oscillator to stabilize.[3]
See also
- Power-on reset
- Brown-out reset
- Watchdog timer
- Low-voltage detect
References
- ↑ PIC tutorials - PIC16x8x, retrieved 27 October 2011
- ↑ Maxim - Crystal Considerations with Maxim Real-Time Clocks, retrieved 27 October 2011
- ↑ Microchip - reset, retrieved 27 October 2011
 |  |
