Engineering:Low-force helix

From HandWiki
Revision as of 06:13, 10 July 2022 by imported>Rjetedi (fixing)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

A low-force helix (LFH-60) is a 60-pin electrical connector (four rows of 15 pins) with signals for two digital and analog connectors. Each of the pins is twisted approximately 45 degrees between the tip and the plastic frame which holds the pins in place. Hence "helix" in the name.

The DMS-59 is a derivative of the LFH60.

Cisco router serial LFH60 socket and cable LFH60 and DB15 plugs
LFH60F connector
DMS-59 connector (with missing pin 58)
DMS-59 VGA adapter (with missing pin 58)

The LFH connector is typically used with workstations, because it can connect a single computer graphics source to up to four different monitors. The standard interface is a 60-pin LFH connector with two breakout VGA or DVI cables. This system provides users with flexibility for a variety of display configurations, though forsakes standard DVI or VGA connectors. This renders the LFH connector unusable without an adapter.

It's also used in HDCI (High Definition Camera Interface) used in Polycom HDX video conferencing systems.

Using the LFH interface requires a graphics card with multi-monitor capabilities and an LFH port. NVIDIA and Matrox used to manufacture such cards.

Another application of LFH capabilities is manufactured by Matrox. The Matrox card outputs via two LFH cables to a single monitor, delivering 9.2 million pixels of resolution (3840 × 2400). This system provides large amounts of detailed information for professional applications such as aerospace and automotive visualization, computer aided design, desktop publishing, digital photography, life sciences, mapping, oil and gas exploration, plant design and management, satellite imaging, space exploration, and transportation and logistics.

The LFH connector is used in some Cisco routers and WAN Interface Cards.[1]

See also

References

General