Engineering:SMPTE 259M
From HandWiki
Revision as of 00:43, 14 April 2022 by imported>JOpenQuest (simplify)
Short description: Serial digital interface for video transport
SMPTE 259M is a standard published by SMPTE which "describes a 10-bit serial digital interface operating at 143/270/360 Mb/s."[1]
The goal of SMPTE 259M is to define a serial digital interface (based on a coaxial cable), called SDI or SD-SDI.
There are 4 bit rates defined, which are normally used to transfer the following standard video formats:
Variant | Bit rate | Aspect ratio | Total lines (per frame) | Active pixels (per line) | Active lines | Frame rate |
---|---|---|---|---|---|---|
SMPTE 259M-A | 143 Mbit/s | 4:3 | 525 | 768 | 486 | 59.94i |
SMPTE 259M-B | 177 Mbit/s | 4:3 | 625 | 948 | 576 | 50i |
SMPTE 259M-C | 270 Mbit/s | 4:3 or 16:9 | 525 | 720 | 486 | 59.94i |
SMPTE 259M-C | 270 Mbit/s | 4:3 or 16:9 | 625 | 720 | 576 | 50i |
SMPTE 259M-D | 360 Mbit/s | 16:9 | 525 | 960 | 486 | 59.94i |
References
- ↑ ST 259:2008 : For Television — SDTV1 Digital Signal/Data — Serial Digital Interface. 2008. 1–18. doi:10.5594/S9781614824077. ISBN 978-1-61482-407-7.
![]() | Original source: https://en.wikipedia.org/wiki/SMPTE 259M.
Read more |