Engineering:Fresh Breeze Respect
| Respect | |
|---|---|
| Role | Paramotor |
| National origin | Germany |
| Manufacturer | Fresh Breeze |
| Introduction | mid-2000s |
| Status | Production completed |
The Fresh Breeze Respect is a family of German paramotors that was designed and produced by Fresh Breeze of Wedemark for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.[1]
Design and development
The Respect was designed to comply with the US FAR 103 Ultralight Vehicles rules as well as European regulations. It features a paraglider-style wing, single-place accommodation and a single 17 hp (13 kW) Solo 210 or 28 hp (21 kW) Hirth F33 engine, depending on the model in pusher configuration with a reduction drive and a 122 cm (48 in) diameter two-bladed composite propeller. The fuel tank capacity is 10 litres (2.2 imp gal; 2.6 US gal). The aircraft propeller cage can be folded into four parts and the aircraft rigged with low or high hang points.[1]
As is the case with all paramotors, take-off and landing is accomplished by foot. Inflight steering is accomplished via handles that actuate the canopy brakes, creating roll and yaw.[1]
Variants
- Respect 122
- Model with a 17 hp (13 kW) Solo 210 engine with a 2.57:1 ratio reduction drive and a 122 cm (48 in) diameter two-bladed composite propeller. Empty weight is 26 kg (57 lb).[1]
- Respect Monster
- Model with a 28 hp (21 kW) Hirth F33 engine with a 2.65:1 ratio reduction drive and a 122 cm (48 in) diameter two-bladed composite propeller. Empty weight is 28 kg (62 lb).[1]
Specifications (Respect Monster)
Data from Bertrand[1]
General characteristics
- Crew: one
- Empty weight: 28 kg (62 lb)
- Fuel capacity: 10 litres (2.2 imp gal; 2.6 US gal)
- Powerplant: 1 × Hirth F33 single cylinder, two-stroke, air-cooled aircraft engine, with a 2.57:1 reduction drive, 21 kW (28 hp)
- Propellers: 2-bladed composite, fixed pitch, 1.22 m (4 ft 0 in) diameter
References
 |  |
