Engineering:Moore 24

From HandWiki
Revision as of 12:52, 25 June 2023 by Steve Marsio (talk | contribs) (correction)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Sailboat class
Moore 24
Moore 24 sail badge.png
SCYC SCORE-Moore 24 Regatta, April 2014.jpg
Development
DesignerGeorge Olson and Ron Moore
LocationUnited States
Year1972
No. built158 (2021)
Builder(s)Moore Sailboats
RoleRacer
Boat
Boat weight2,050 lb (930 kg)
Draft4.08 ft (1.24 m)
Hull
Typemonohull
Constructionfiberglass
LOA23.75 ft (7.24 m)
LWL21.75 ft (6.63 m)
Beam7.17 ft (2.19 m)
Engine typeoutboard motor
Hull appendages
Keel/board typefin keel
Ballast1,000 lb (454 kg)
Rudder(s)internally-mounted spade-type rudder
Rig
Rig typeBermuda rig
I (foretriangle height)26.25 ft (8.00 m)
J (foretriangle base)9.75 ft (2.97 m)
P (mainsail luff)25.00 ft (7.62 m)
E (mainsail foot)9.50 ft (2.90 m)
Sails
Sailplanfractional rigged sloop
Mainsail area118.75 sq ft (11.032 m2)
Jib/genoa area127.97 sq ft (11.889 m2)
Total sail area246.72 sq ft (22.921 m2)
Racing
Class associationMORC
PHRF150-156

The Moore 24 is an American trailerable sailboat that was designed by George Olson and Ron Moore as a racer and first built in 1972.[1][2][3]

Production

The design is built by Moore Sailboats in the United States . The company built 156 boats between 1972 and 1988, with two more in more recent years, for a total of 158. The design remains in production.[1][3][4][5]

Design

The Moore 24 is a development of Grendal, a prototype sailboat that was intended for a Transpacific Yacht Race for boats under 30 ft (9.1 m) in length. That race was never held, but Grendal went on to win the 1970 Midget Ocean Racing Class (MORC) championships. Grendal had a beam of under 6 ft (1.8 m), but the production boat was given a wider beam of 7.17 ft (2.19 m). The Moore 24 also received a raised deck to increase headroom below, a relocated keel and a new sail plan. Development has continued though the production period of the boat and production boats in 2021 were all flush-decked, with open transoms, while remaining class-legal.[3]

The Moore 24 is a racing keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig, a raked stem, a reverse transom, an internally mounted spade-type rudder controlled by a tiller and a fixed fin keel. It displaces 2,050 lb (930 kg) and carries 1,000 lb (454 kg) of ballast, giving it a high ballast-displacement of 48.78%.[1][3]

The boat has a draft of 4.08 ft (1.24 m) with the standard keel. It is normally fitted with a small 2 to 4 hp (1 to 3 kW) outboard motor for docking and maneuvering. It has sleeping accommodation for two people. Cabin headroom is 42 in (107 cm).[1][3]

The design has a PHRF racing average handicap of 156 according to The Sailor's Book of Small Cruising Sailboats and 150 according to the Yacht Racing Association of San Francisco Bay. It has a hull speed of 6.2 kn (11.5 km/h).[3][6]

Operational history

The boat is supported by an active class club that organizes racing events, the Moore 24 National Association.[7]

In a 2010 review Steve Henkel wrote, "best features: She's fast in heavy air; the high (50%) B/D ratio helps to keep the Moore 24 on her feet. Worst features: Due to her light weight and cramped cabin space, almost no one would want to buy this design as a cruising boat."[3]

Serial circumnavigator Webb Chiles sailed his Moore 24, Gannet, solo around the world from 2014-2019, departing and arriving San Diego, California.[8]

In 2016 the Moore 24 Mas! won the Pacific Cup overall, double handed, crewed by Mark English and Ian Rogers. The two set a new course record for the Moore 24 of 10 days 14 hours and 30 minutes[9] with a 240 mile best 24 hour run.[10]

See also

References

External links