Earth:Seismic loading
From HandWiki
Revision as of 10:22, 15 December 2020 by imported>SpringEdit (over-write)
Seismic loading is one of the basic concepts of earthquake engineering which means application of an earthquake-generated agitation[1] to a structure. It happens at contact surfaces of a structure either with the ground,[2] or with adjacent structures,[3] or with gravity waves from tsunami.
Seismic loading depends, primarily, on:
- Anticipated earthquake's parameters at the site - known as seismic hazard
- Geotechnical parameters of the site
- Structure's parameters
- Characteristics of the anticipated gravity waves from tsunami (if applicable).
Sometimes, seismic load exceeds ability of a structure to resist it without being broken, partially or completely Due to their mutual interaction, seismic loading and seismic performance of a structure are intimately related.[4]
See also
- Earthquake engineering structures
References
- ↑ Hudson, Donald E. (1990) [1979]. Reading and Interpreting Strong Motion Accelerograms. Engineering monographs on earthquake criteria, structural design, and strong motion records. 1. EERI. ISBN 0-685-14388-0.
- ↑ The Geotechnical Earthquake Engineering Portal
- ↑ Seismic Pounding between Adjacent Building Structures
- ↑ Reitherman, Robert (2012). Earthquakes and Engineers: An International History. Reston, VA: ASCE Press. ISBN 9780784410714. http://www.asce.org/Product.aspx?id=2147487208&productid=154097877.
 |  |
