Engineering:Rolls-Royce Medway

From HandWiki
Revision as of 08:30, 9 September 2023 by John Stpola (talk | contribs) (url)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Medway
RRMedway.JPG
Rolls-Royce Medway with switch-in thrust deflector
Type Turbofan
Manufacturer Rolls-Royce Limited
First run November 1959
Major applications Armstrong Whitworth AW.681
Number built 9

The Rolls-Royce RB.141 Medway was a large low-bypass turbofan engine designed, manufactured and tested in prototype form by Rolls-Royce in the early-1960s. The project was cancelled due to changes in market requirements that also led to the development and production of the smaller but similar Rolls-Royce Spey, and the cancellation of the Armstrong Whitworth AW.681 military transport aircraft project.

Design and development

Designed by a team led by Alan Arnold Griffith, the RB.141 was originally designed to meet a new propulsion requirement for the de Havilland DH.121 airliner project which later became the Hawker Siddeley Trident. The engine was later named after the River Medway in line with Rolls-Royce company tradition for jet engines. The DH.121 itself was being designed to a requirement and specification from British European Airways issued in February 1958, and when this requirement was altered to that of a smaller aircraft, the Medway in its initial form was no longer needed.[1]

As a considerable amount of company funds had already been spent on development, the project was continued to rework the design for another future aircraft project, the Armstrong Whitworth AW.681 VTOL military transport aircraft. The rear section of the engine was modified to incorporate an internal thrust deflector to duct exhaust gases through swivelling nozzles; an idea similar to that used on the contemporary Bristol Siddeley Pegasus. Cancellation of the AW.681 project however also brought to an end further development work on the Medway with attention turning to the smaller, but very closely related, Spey turbofan, the Spey being basically a scaled-down Medway incorporating more recent technical developments.[2]

Another possible application for the Medway was the Saab 37 Viggen, but a lack of British government funding was stated as the reason for the cancellation of this order.

By December 1963 the Medway had successfully completed over 1,700 hours of bench running.[3]

Variants

RB.140
  • 8,000 lbf (36 kN) thrust, early development engine
RB.141 Medway
  • Variant for DH.121 airliner use
RB.142 Medway
  • Vectored thrust development for the AW.681.
RB.174 Medway
  • Advanced civil development
RB.177 Medway
  • Advanced military development of ~15,000 lb st dry, proposed for the Saab 37 Viggen[4]

Projected applications

The Medway powered AW.681

Specifications (RB.141-3 Medway)

Data from Aircraft engines of the World 1964/65., [5]

General characteristics

  • Type: Low bypass twin-spool turbofan with vectored thrust hot exhaust
  • Length: 165 in (4,200 mm)
  • Diameter: 42 in (1,100 mm)
  • Dry weight: 3,500 lb (1,600 kg)

Components

  • Compressor: Axial, 6-stage LP fan, 11-stage HP
  • Combustors: Cannular, 10 chambers
  • Turbine: 2-stage LP, 2-stage HP
  • Fuel type: Jet fuel
  • Oil system: Return system at 50 psi (3.4 bar)

Performance

Take-off: 77 kN (17,300 lbf)
Max Continuous: 71 kN (16,000 lbf)

See also

Related development

Related lists

References

Notes

  1. Gunston 1989, p.151.
  2. "havilland dh | rolls-royce today | pdf archive | 1967 | 2210 | Flight Archive". http://www.flightglobal.com/pdfarchive/view/1967/1967%20-%202210.html. 
  3. Flightglobal archive - Flight, December 1963 Retrieved: 19 July 2009
  4. Flightglobal archive - Flight, June 1962 Retrieved: 5 December 2012
  5. Wilkinson, Paul H. (1964). Aircraft engines of the World 1964/65 (21st ed.). London: Sir Isaac Pitman & Sons Ltd.. p. 134. 

Bibliography

  • Gunston, Bill. World Encyclopedia of Aero Engines. Cambridge, England. Patrick Stephens Limited, 1989. ISBN:1-85260-163-9

External links