Engineering:Honda CBR750

From HandWiki
Revision as of 22:55, 3 February 2024 by TextAI (talk | contribs) (link)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Motorcycle
Honda CBR750
Honda CBR750 1987.jpg
1987 Honda MVX250F
ManufacturerHonda
Production1987–1988
ClassSport bike
Engine749 cc (45.7 cu in), liquid cooled, four-stroke, DOHC I4
Bore / stroke70 mm × 48 mm (2.8 in × 1.9 in)
TransmissionSix-speed constant mesh manual
SuspensionFront: telescopic fork (with air spring cylinder)
Rear: swingarm
BrakesInboard single hydraulic front and rear
TiresFront: 110/80 17"
Rear: 140/70 18"
Wheelbase1,480 mm (58 in)
DimensionsL: 2,170 mm (85 in)
W: 750 mm (30 in)
H: 1,185 mm (46.7 in)
Seat height770 mm (30 in)
Fuel capacity21 l (4.6 imp gal; 5.5 US gal)

The Honda CBR750 is a motorcycle produced by Honda between 1987 and 1988.

History

The CBR series launched in 1983 was a range of motorcycles with displacements of 250cc and 400cc, but in 1987, as the flagship model of the same series, a motorcycle of 750cc would debut exclusively for the Japanese domestic market.[1]

Specifications

The engine, with a cubic capacity of 749 cm³, was a liquid-cooled four-cylinder in-line with double camshaft (DOHC: Double Overhead Camshaft) with 4 valves per cylinder for a total of 16.[2] Fitted with a six-speed gearbox, the CBR750 used a multi-disc wet clutch. The engine was housed on the steel frame which guaranteed strength and lightness at the same time. The front suspension used was an adjustable telescopic fork. At the rear, however, it mounted a single shock absorber which was also adjustable. The braking system consisted of three discs, of which the front ones were double. In 1988, the CBR750 underwent a series of changes and improvements.[3]

References