Engineering:Reverso (climbing equipment)
A Reverso is a belay device developed and patented by Petzl, used for example in rock-climbing and other activities which involves rope-work. Another version of this device is the Reversino, intended for use with thinner ropes.
A Reverso can be used to belay the leader, one or two seconds, or as a descender during rappelling. It can also be used in self-braking mode, to belay one or two seconds, if attached directly to the belay.
A Reverso is similar in design and use to an ATC when belaying a lead climber from below. A rope passes through the Reverso, through a carabiner attached to both the Reverso and the belayer's harness, and back through the same hole in the Reverso. This creates the friction required to properly belay a climber.
When belaying a seconder from the top of a climb, the Reverso is attached by a carabiner through the "extra loop" that an ATC does not have, to the anchors in the place of an italian hitch knot. Using this method, the device is self-locking, and cannot be released without extra gear.
See also
- Climbing equipment
- Glossary of climbing terms
- Indoor climbing
References
- Manufacturer's information
- REVERSO 3 information
- Video: How to use the belay device and descender Reverso
- Petzl Reverso 3 review with video
 |
