Engineering:Swan 39

From HandWiki
Revision as of 12:19, 4 February 2024 by Importwiki (talk | contribs) (update)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Sailboat class
Swan 39
Development
DesignerRon Holland
LocationFinland
Year1978
No. built33
Builder(s)Oy Nautor AB
RoleRacer-Cruiser
Boat
Boat weight18,000 lb (8,165 kg)
Draft7.20 ft (2.19 m)
Hull
Typemonohull
Constructionglassfibre
LOA39.30 ft (11.98 m)
LWL31.50 ft (9.60 m)
Beam12.50 ft (3.81 m)
Engine typePerkins Engines 4-108 diesel engine
Hull appendages
Keel/board typefin keel
Ballast7,900 lb (3,583 kg)
Rudder(s)Spade-type rudder
Rig
Rig typeBermuda rig
I (foretriangle height)54.00 ft (16.46 m)
J (foretriangle base)16.50 ft (5.03 m)
P (mainsail luff)47.50 ft (14.48 m)
E (mainsail foot)13.30 ft (4.05 m)
Sails
SailplanMasthead sloop
Mainsail area315.88 sq ft (29.346 m2)
Jib/genoa area445.50 sq ft (41.388 m2)
Total sail area761.38 sq ft (70.735 m2)
Racing
PHRF78-87

The Swan 39 is a Finnish sailboat that was designed by Ron Holland as an International Offshore Rule (IOR) racer and a cruiser and first built in 1978.[1][2][3][4][5]

The production boat was based on IMP, a very successful IOR racer built in 1977 that represented the United States in the 1977 and 1979 Admiral's Cup.[1][2][5][6]

Production

The design was built by Oy Nautor AB in Finland, from 1978 to 1980, with 33 boats completed, but it is now out of production. The boat was built in both dedicated racing and cruising versions, with 12 of the racing configuration and 21 of the cruising model built.[1][2][5][7][8]

The Swan 39 was the first Holland design that was produced Oy Nautor AB.[6]

Design

The Swan 39 is a recreational keelboat, built predominantly of glassfibre, with wood trim. It has a masthead sloop rig, a raked stem, a reverse transom, an internally mounted spade-type rudder controlled by a wheel and a fixed fin keel. It displaces 18,000 lb (8,165 kg) and carries 7,900 lb (3,583 kg) of lead ballast.[1][2][5]

The boat has a draft of 7.20 ft (2.19 m) with the standard keel.[1][2][5]

The boat is fitted with a British Perkins Engines 4-108 diesel engine for docking and manoeuvring. The fuel tank holds 32 U.S. gallons (120 L; 27 imp gal) and the fresh water tank has a capacity of 80 U.S. gallons (300 L; 67 imp gal).[1][2][5]

The design has sleeping accommodation for eight people, with a double "V"-berth in the bow cabin, two straight settees around a drop leaf table and two pilot berths in the main cabin and two aft cabins with a single berth in each. The galley is located on the starboard side of the companionway ladder. The galley is of straight configuration and is equipped with a three-burner stove, an ice box and a sink. A navigation station is opposite the galley, on the port side. The head is located just aft of the bow cabin on the port side.[1][2][5]

For sailing downwind the design may be equipped with a symmetrical spinnaker.[1][2]

The design has a hull speed of 7.52 kn (13.93 km/h) and a PHRF handicap of 78 to 87.[1][2][9]

Operational history

The first Swan World Cup was held in August and September 1980, off the coast of Porto Cervo, Sardinia, with 59 Swan boats participating. The overall winner was an Italian Swan 39 named Black Swan.[10]

See also

References