Engineering:Lancia Kappa

Lancia Kappa
Overview
Manufacturer	Lancia
Also called	Lancia k
Production	1994 – December 2000 (saloon) 1996 – December 2000 (estate) July 1996 – April 2000 (coupé)
Assembly	Saloon: Rivalta plant, Turin, Italy Coupé: Chivasso, Italy (Maggiora) Estate: Turin, Italy (Pininfarina)
Designer	Ercole Spada at I.DE.A Institute (saloon) Centro Stile Lancia (coupé) Pininfarina (estate)
Body and chassis
Class	Executive car (E)
Body style	4-door saloon 5-door estate 2-door coupé
Layout	FF layout
Platform	Type E
Related	Alfa Romeo 166
Powertrain
Engine	Petrol: 2.0 L 838A4.000 turbo I4 2.0 L Fiat family C I5 2.0 L Fiat family C turbo I5 2.4 L Fiat family C I5 3.0 L 838B.000 V6 Diesel: 2.4 L TD I5 2.4 L JTD common rail TD I5
Transmission	5-speed manual 4-speed automatic AISIN or Z.F.
Dimensions
Wheelbase	Saloon/estate: 2,700 mm (110 in) Coupé: 2,580 mm (102 in)
Length	Saloon/estate: 4,687 mm (184.5 in) Coupé: 4,567 mm (179.8 in)
Width	Saloon/estate: 1,826 mm (71.9 in) Coupé: 1,830 mm (72 in)
Height	Saloon/estate: 1,462 mm (57.6 in) Coupé: 1,425 mm (56.1 in)
|uk|Kerb|Curb}} weight	1,425 kg (3,142 lb)-1,580 kg (3,483 lb)
Chronology
Predecessor	Lancia Thema
Successor	Lancia Thesis

The Lancia Kappa or Lancia k (Type 838) is an executive car manufactured and marketed by Italian manufacturer Lancia from 1994–2000, with saloon, estate, and coupé variants — sharing platforms with the Alfa Romeo 166. The Kappa has a front-engine, front-drive, five passenger, left-hand drive design.

After its debut at the 1994 Paris Auto Show, production reached 117,216, over six years. The Kappa was manufactured at the Fiat factory in Tetti Francesi, Rivalta di Torino and was designed by the Lancia Style Center in collaboration with the I.DE.A Institute.

Lancia had earlier used the Kappa nameplate for the 1919 Kappa, with evolutions called Dikappa and Trikappa).

Overview

Lancia Kappa rear side.

Kappa is the tenth letter of the Greek alphabet, Lancia having frequently used the Greek letters for its model nameplates. In writing, Lancia often referred to the Kappa simply as the k (lower case "k"), which is fairly similar to the original Greek letter κ.

In Poland , where Fiat Auto is the largest domestic car manufacturer, the Kappa served as official government cars (replacing Themas).

Autocar's Peter Robinson reviewed the Kappa in November 1994. He commented on the car's bland styling which was justified by Fiat's Paolo Cantarella on the basis that the designers did not want to create too much "visual noise." The body was reported as having twice the torsional rigidity of the outgoing Thema, and was 15 percent stiffer than any of its rivals. The automatic Aisin-Warner gearbox (50-40 LE type) was shared with the Volvo 850. Robinson went on to say "the Kappa´s dimensions ensure a commodious interior, the impression of space only heightened by a low cowl and very Japanese-looking fascia, somewhere between a Honda NSX and Lexus LS400." Rear cabin room was described as "immense" but the cushion was criticised for being too flat, a fault rectified in later iterations of the car. Robinson criticised the "horrid mock wood with which Lancia frames the prominent central console that runs from the handbrake, up the full length of the dash and over the top." About the driving characteristics, Robinson wrote: "If Lancia quietened the starter motor, this would be one refined drivetrain...with no hint of any 5-cylinder unevenness." The 2.4 litre engine tested appeared to have been tuned for low-end torque, a characteristic of this Alpine brand. The engine was praised by Robinson for its "smooth responsiveness" and "torque steer has been eliminated...and the Servotronic steering is terrific, with just the right degree of self-centering." His summary of ride and handling was that car was better than average but not class-leading: "On the Lancia there is too much body roll and the front grip in the wet didn't inspire confidence."

Model history

• 1994 - Kappa production begins.
• 1996 - An estate car, marketed as Station Wagon, joins the lineup. The naturally aspirated 2.0-litre gasoline engine is fitted with a variable geometry inlet manifold. Inside the cabin, the seats are replaced by a new design, including new upholstery patterns.
• 1997 - The coupé is launched, while at the same time, some changes are made to the interior, trunk, suspension and engine bay, as well as new alloy wheels.
• 1998 - The 2.0 L turbocharged four-cylinder engine gets replaced by the five-cylinder, while the turbodiesel was upgraded to a JTD engine. The bumper guards, previously black, are changed to body-coloured, and the base trim level, LE, is dropped, leaving only the more lavish LS and LX. At the same time, a special trim level is introduced for the turbocharged gasoline engine, called simply the "Turbo", distinguished by the lack of chrome decals around the window frames. The interior materials are also upgraded across the lineup, including the addition of a leather-wrapped steering wheel with a different design and front central armrest.
• 1999 - The other two five-cylinder engines are modified along with the air conditioning unit.
• 2000 - The Kappa gains xenon HID headlamps. Production of Berlina and SW ceased in December 2000 (Coupé's earlier in the year).

Kappa SW and Coupé

Lancia Kappa SW front side

Lancia Kappa SW rear side

Lancia Kappa Coupé front side

Lancia Kappa Coupé rear side

Lancia Kappa Coupé interior

The station wagon version of the Kappa, designated "SW" by Lancia, was designed and built by Pininfarina and did not differ from the saloon exterior dimensions, sharing most of its body panels. Only 9,208 cars were built in Pininfarina's factory. This estate version was also available with Boge-Nivomat self-levelling hydropneumatic rear suspension.

The Coupé was designed by Centro Stile Lancia and built by Maggiora and technically quite different from the saloon, having a shorter wheelbase (by 120 mm), wider rear track and a distinctive profile with frameless doors. The front, from bumper to the window screen, was identical to the other Kappas. It was Lancia's first coupé since 1984, when the Beta and Gamma coupés were discontinued, and remains the last Lancia to feature this body style to this day. The small building capacities at the Maggiora factory for this essentially hand-made car, and the relatively high price, destined it to be a rare vehicle. As a money saver the rear lights came from Delta. Only 3263 coupes were manufactured from 1996 to 2000, making this model a true rarity. Car magazine described the car as looking "top heavy, like a Bentley Continental that's been heated up and squeezed at both ends." However, the car's engine range was praised for matching the vehicle's dynamics, the 2.4 litre five cylinder and the 3.0 Alfa-derived V6 coming closest to "infusing the k Coupe with the classy character its styling tries to suggest." "It's the spiky turbo four that asks the hardest questions of the chassis and the all-strut suspension doesn't flounder. It shines. A viscous coupling helps the front wheels cope with the onslaught of the engine's old school, big-bang turbo delivery, and it feels remarkably untroubled." About the refinement and ride, John Barker (of Car Magazine) reported that the occupants "are completely isolated from any vibration while the ride is smooth at moderate speeds, parrying bumps quietly and unobtrusively." The interior was described as "appealing" and having "curvy, attractive door casings, plump supportive Recaro seats and choice plastics.". The 1997 price was estimated at 24,000 pounds sterling.

Engines

The Kappa had engines fitted transversely, all powering only the front wheels. They were available with either a five-speed manual or four-speed automatic transmission, unless otherwise indicated.

2.0 20V

• 1998 cc, straight-5, DOHC, 4 valves per cylinder, 146 hp (107 kW) at 6100 rpm and 185 N⋅m (136 lb⋅ft) at 4500 rpm
• 1998 cc, straight-5, DOHC, 4 valves per cylinder, 155 hp (114 kW) at 6500 rpm and 186 N⋅m (137 lb⋅ft) at 4000 rpm
• uprated to 155 hp in 1996, thanks to the addition of a variable geometry inlet manifold, called the Variable Intake System (V.I.S) by Lancia.
• modified again in 1999.
• there were two versions of the manual transmission available for this engine, called Power Drive and Comfort Drive, with gear ratios optimized towards the former or the latter, respectively. Optional 4-speed automatic AISIN AW 596 could be chosen, later replaced by AW 30510.
• this engine was not available in the Coupé

2.4 20V

• 2446 cc, straight-5, DOHC, 4 valves per cylinder, 175 hp (129 kW) at 6100 rpm and 230 N⋅m (170 lb⋅ft) at 3750 rpm
• fitted with V.I.S
• from 1998 available with 4-speed automatic AISIN AW 30510.
• slightly modified in 1999

3.0 V6 24V

The 3.0 V6 24V

• 2959 cc, 'Busso' V6, DOHC, 4 valves per cylinder, 204 hp (150 kW) at 6300 rpm and 270 N⋅m (199 lb⋅ft) at 4500 rpm
• not fitted with V.I.S
• slightly modified in 1999
• Available with 5-speed manual transmission or 4-speed automatic Z.F. 4HP-18EH or from 1998 with Z.F. 4HP20. The latter marketed as sequential, adaptive automatic called 'Comfortronic', with manual operation.

2.0 16V Turbo

The 2.0 turbo 16V

• 1995 cc, turbo straight-4, DOHC, 4 valves per cylinder, 205 hp (151 kW) at 5600 rpm and 298 N⋅m (220 lb⋅ft) at 2750 rpm
• replaced by the 5-cylinder turbo in 1998
• 5-speed manual transmission only

2.0 20V Turbo

• 1998 cc, turbo straight-5, DOHC, 4 valves per cylinder, 220 hp (162 kW) at 6000 rpm and 315 N⋅m (232 lb⋅ft) at 2750 rpm
• superseded the 4-cylinder turbo in 1998
• 5-speed manual transmission only

2.4 TDs/JTD

• originally a distributor-pump turbodiesel refitted with common rail in 1998 and thereafter referred to as a JTD engine
• TDs - 2387 cc, turbodiesel straight-5, SOHC, 2 valves per cylinder, 124 hp (91 kW) at 4250 rpm and 246 N⋅m (181 lb⋅ft) at 2250 rpm
• JTD - 2387 cc common rail turbodiesel straight-5, SOHC, 2 valves per cylinder, 136 hp (100 kW) at 4250 rpm and 309 N⋅m (228 lb⋅ft) at 2000 rpm
• not available with automatic transmission or in the Coupé

Engine	Displacement	Power	Torque	Body	Gearbox	Top speed	0–100 km/h (0–62 mph)	Year
Petrol engines
2.0 20V LE	1,998 cc (121.9 cu in)	146 PS (107 kW; 144 hp) at 6100 rpm	185 N⋅m (136 lb⋅ft) at 4500 rpm	Sedan	manual automatic	205 km/h (127 mph) -	9.8 s -	1994
2.0 20V		155 PS (114 kW; 153 hp) at 6500 rpm	186 N⋅m (137 lb⋅ft) at 4000 rpm	Sedan	manual automatic	212 km/h (132 mph) 210 km/h (130 mph)	9.2 s 12.1 s	1996
				SW	manual	205 km/h (127 mph)	10.0 s	1996
2.4 20V	2,446 cc (149.3 cu in)	175 PS (129 kW; 173 hp) at 6100 rpm	230 N⋅m (170 lbf⋅ft) at 3750 rpm	Sedan	manual automatic	218 km/h (135 mph) 215 km/h (134 mph)	8.7 s 10,5 s	1994 1998
				SW	manual automatic	212 km/h (132 mph) 210 km/h (130 mph)	8.9 s 10,7 s	1996 1998
				Coupé	manual	218 km/h (135 mph)	8.7 s	1996
3.0 V6 24V	2,959 cc (180.6 cu in)	204 PS (150 kW; 201 hp) at 6300 rpm	270 N⋅m (199 lbf⋅ft) at 4500 rpm	Sedan	manual automatic comfortronic	225 km/h (140 mph) 220 km/h (137 mph) 220 km/h (137 mph)	8.0 s 9.8 s -	1994 1994 1998
				SW	automatic comfortronic	218 km/h (135 mph) 218 km/h (135 mph)	9.9 s -	1996 1998
				Coupé	automatic comfortronic	225 km/h (140 mph) 220 km/h (137 mph)	9.8 s 8.9 s	1996 1998
2.0 16V turbo	1,995 cc (121.7 cu in)	205 PS (151 kW; 202 hp) at 5600 rpm	298 N⋅m (220 lb⋅ft) at 2750 rpm	Sedan	manual	235 km/h (146 mph)	7.3 s	1994
				SW	manual	230 km/h (143 mph)	8.3 s	1996
				Coupé	manual	235 km/h (146 mph)	7.3 s	1996
2.0 20V turbo	1,998 cc (121.9 cu in)	220 PS (162 kW; 217 hp) at 5750 rpm	315 N⋅m (232 lb⋅ft) at 2750 rpm	Sedan	manual	243 km/h (151 mph)	7.3 s	1998
				SW	manual	235 km/h (146 mph)	7.9 s	1998
				Coupé	manual	243 km/h (151 mph)	7.3 s	1998
Diesel engines
2.4 10V td	2,387 cc (145.7 cu in)	124 PS (91 kW; 122 hp) at 4000 rpm	265 N⋅m (195 lb⋅ft) at 2000 rpm	Sedan	manual	193 km/h (120 mph)	12.6 s	1994
				SW	manual	190 km/h (118 mph)	11.5 s	1996
2.4 10V JTD		136 PS (100 kW; 134 hp) at 4250 rpm	309 N⋅m (228 lb⋅ft) at 2000 rpm	Sedan	manual	202 km/h (126 mph)	10.0 s	1998
				SW	manual	200 km/h (124 mph)	10.8 s	1998

manual is 5-speed, automatic/comfortronic is 4-speed

Concept cars and specials

Lancia Kayak

Lancia Kayak

The Lancia Kayak or Bertone Kayak was a 4-seater coupé concept car by Italian coachbuilder Bertone based on Lancia Kappa mechanicals, unveiled at the 1995 Geneva Motor Show.

Kappa Limousine

A one-off Kappa Limousine with extended middle section, and wheelbase, was built for Gianni Agnelli. Its concept was very similar to the Thema Limousine from 1987. The car was finished in dark blue with a matte-black roof.

Lancia Kappa Limousine

External links

• Lancisti.net—An information exchange and support community for Lancia owners and enthusiasts