Engineering:Pietra dura

From HandWiki
Revision as of 13:46, 4 February 2024 by TextAI2 (talk | contribs) (add)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Decorative stone inlays

Altar frontal of Italian opera di commessi, Dubrovnik Cathedral
Detail of design with roses over crossed canes, 1882

Pietra dura (Italian: [ˈpjɛːtra ˈduːra]) or pietre dure ([ˈpjɛːtre ˈduːre]) (see below), called parchin kari or parchinkari (Persian: پرچین کاری‎) in the Indian Subcontinent, is a term for the inlay technique of using cut and fitted, highly polished colored stones to create images. It is considered a decorative art. The stonework, after the work is assembled loosely, is glued stone-by-stone to a substrate after having previously been "sliced and cut in different shape sections; and then assembled together so precisely that the contact between each section was practically invisible". Stability was achieved by grooving the undersides of the stones so that they interlocked, rather like a jigsaw puzzle, with everything held tautly in place by an encircling 'frame'. Many different colored stones, particularly marbles, were used, along with semiprecious, and even precious stones. It first appeared in Rome in the 16th century, reaching its full maturity in Florence. Pietra dura items are generally crafted on green, white or black marble base stones. Typically, the resulting panel is completely flat, but some examples where the image is in low relief were made, taking the work more into the area of hardstone carving.

Related arts and terms

Pietra dura detail with semiprecious stones inlaid into white marble at the Tomb of Jahangir in Lahore
Itmad-Ud-Daulah's Tomb in Agra is decorated with arabesques and geometric patterns.
Floral 'Parchin kari' work in the Taj Mahal, incorporating precious and semi-precious stone

Pietre dure is an Italian plural meaning "hard rocks" or hardstones; the singular pietra dura is also encountered in Italian. In Italian, but not in English, the term embraces all gem engraving and hardstone carving, which is the artistic carving of three-dimensional objects in semi-precious stone, normally from a single piece, for example in Chinese jade. The traditional convention in English has been to use the singular pietra dura just to denote multi-colored inlay work.[1] However, in recent years there has been a trend to use "pietre dure" as a term for the same thing, but not for all of the techniques it covers, in Italian.[2] But the title of a 2008 exhibition at the Metropolitan Museum of Art, New York, Art of the Royal Court: Treasures in Pietre Dure from the Palaces of Europe, used the full Italian sense of the term, probably because they thought that it had greater brand recognition. The material on the website speaks of objects such as a vase in lapis lazuli as being examples of "hardstone carving (pietre dure)".[3] The Victoria & Albert Museum in London uses both versions on its website, but uses "pietra dura" ("A method of inlaying coloured marbles or semi-precious stones into a stone base, often in geometric or flower patterns....") in its "Glossary",[4] which was evidently not consulted by the author of another page, where the reader is told: "Pietre dure (from the Italian 'hard stone') is made from finely sliced coloured stones, precisely matched, to create a pictorial scene or regular design".[5] The English term "Florentine mosaic" is sometimes also encountered, probably developed by the tourist industry. Giovanni Montelatici (1864–1930) was an Italian Florentine artist whose brilliant work has been distributed across the world by tourists and collectors.

It is distinct from mosaic in that the component stones are mostly much larger and cut to a shape suiting their place in the image, not all of roughly equal size and shape as in mosaic. In pietra dura, the stones are not cemented together with grout, and works in pietra dura are often portable. Nor should it be confused with micromosaics, a form of mosaic using very small tesserae of the same size to create images rather than decorative patterns, for Byzantine icons, and later for panels for setting into furniture and the like.

For fixed inlay work on walls, ceilings, and pavements that do not meet the definition of mosaic, the better terms are intarsia or, in some specific applications, Cosmatesque. Similarly, for works that use larger pieces of stone or tile, opus sectile may be used. Pietra dura is essentially stone marquetry. As a high expression of lapidary art, it is closely related to the art of jewellery. It can also be considered a branch of sculpture because three-dimensionality can be achieved, as with a bas relief.[6]

History

Pietra dura developed from the ancient Roman opus sectile, which at least in terms of surviving examples, was architectural, used on floors and walls, with both geometric and figurative designs. In the Middle Ages cosmatesque floors and small columns, etc. on tombs and altars continued to use inlays of different colours in geometric patterns. Byzantine art continued with inlaid floors, but also produced some small religious figures in hardstone inlays, for example in the Pala d'Oro in San Marco, Venice (though this mainly uses enamel). In the Italian Renaissance this technique again was used for images. The Florentines, who most fully developed the form, however, regarded it as 'painting in stone'.

As it developed in Florence, the technique was initially called "opere di commessi" (approximately, "Fitted together works"). Medici Grand Duke Ferdinando I of Tuscany founded the Galleria di Lavori in 1588,[2] now the Opificio delle pietre dure, for the purpose of developing this and other decorative forms.

A multitude of varied objects were created. Table tops were particularly prized, and these tend to be the largest specimens. Smaller items in the form of medallions, cameos, wall plaques, panels inserted into doors or onto cabinets, bowls, jardinieres, garden ornaments, fountains, benches, etc. are all found. A popular form was to copy an existing painting, often of a human figure, as illustrated by the image of Pope Clement VIII, above. Examples are found in many museums. The medium was transported to other European centers of court art and remained popular into the 19th century. In particular, Naples became a noted center of the craft.[7] By the 20th century, the medium was in decline, in part by the assault of modernism, and the craft had been reduced to mainly restoration work. In recent decades, however, the form has been revived, and receives state-funded sponsorship. Modern examples range from tourist-oriented souvenirs, including reproductions of 19th century style religious subjects (especially in Florence and Naples), to works copying or based on older designs used for luxurious decorative contexts, to works in a contemporary artistic idiom.

Parchin kari

By the early part of the 17th century, smaller objects produced by the Opificio were widely diffused throughout Europe, and as far East to the court of the Mughals in India, where the form was imitated and reinterpreted in a native style; its most sumptuous expression is found in the Taj Mahal. In Mughal India, pietra dura was known as Parchin kari, literally 'inlay' or 'driven-in' work.[8]

Due to the Taj Mahal being one of the major tourist attractions, there is a flourishing industry of pietra dura artifacts in Agra.

Udaipur, renowned as the City of Lakes and Palaces, stands out as a prominent hub for expert inlay artisans in India. Beyond Agra, Udaipur has become a focal point for the preservation and advancement of the delicate art of Pachin Kari.

In recent history, the art of Pachin Kari, has found a spectacular resurgence in the construction of the Ayodhya Ram Mandir. This significant project boasts extensive marble inlay work adorning the temple's floor, elevating the aesthetic appeal of this iconic religious structure. Temple's floor marble inlay work is a testament to the exceptional skills of Udaipur's marble inlay artisans. Led by Chetan Anand Chaudhary from Tilo Pvt Ltd, the team has executed tremendous work, utilizing different colored stones exclusively sourced from mines across India. This dedication to indigenous materials adds authenticity and cultural richness to the art.[9]

Udaipur's marble inlay expertise extends beyond Ayodhya, same team which had executed Ram Mandir inlay had done similar unusual work in the Swaminarayan Temple Delhi, with inlay of 16 holy symbols on submerged paduka in a water fountain, and also in the Nagpur Haj House where artisans adorned unusual curved surfaces with Ayat calligraphy inlay. Their versatile craft also leaves an indelible mark on the new Parliament House, emphasizing Udaipur's significance in shaping structures of national importance with this historical eternal art.

Gallery

Notes

External links