Engineering:Seafarer 29

From HandWiki
Revision as of 15:14, 4 February 2024 by S.Timg (talk | contribs) (correction)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Sailboat class
Seafarer 29
Development
DesignerMcCurdy & Rhodes
LocationUnited States
Year1972
Builder(s)Seafarer Yachts
RoleRacer-Cruiser
Boat
Boat weight6,610 lb (2,998 kg)
Draft4.50 ft (1.37 m)
Hull
Typemonohull
Constructionfiberglass
LOA28.70 ft (8.75 m)
LWL21.25 ft (6.48 m)
Beam9.00 ft (2.74 m)
Hull appendages
Keel/board typefin keel
Ballast2,560 lb (1,161 kg)
Rudder(s)skeg-mounted/internally-mounted spade-type/transom-mounted rudder
Rig
Rig typeBermuda rig
I (foretriangle height)33.50 ft (10.21 m)
J (foretriangle base)11.50 ft (3.51 m)
P (mainsail luff)28.50 ft (8.69 m)
E (mainsail foot)11.50 ft (3.51 m)
Sails
Sailplanmasthead sloop
Mainsail area163.88 sq ft (15.225 m2)
Jib/genoa area192.63 sq ft (17.896 m2)
Total sail area356.42 sq ft (33.113 m2)

The Seafarer 29 is an American sailboat that was designed by McCurdy & Rhodes as an International Offshore Rule Half Ton class racer-cruiser and first built in 1972.[1][2][3][4][5]

Production

The design was built by Seafarer Yachts in the United States , starting in 1972, but it is now out of production.[1][2][4][5][6][7]

Design

The Seafarer 29 is a recreational keelboat, built predominantly of solid laminate fiberglass, with wood trim. It was built with two different deck plans: "Standard" and "Futura". It has a masthead sloop rig; a spooned, raked stem; a raised counter, reverse transom, a skeg-mounted rudder controlled by a wheel and a fixed fin keel or optional centerboard. The fixed keel version displaces 6,610 lb (2,998 kg) and carries 2,560 lb (1,161 kg) of ballast, while the centerboard-equipped version displaces 6,665 lb (3,023 kg) and carries 2,490 lb (1,129 kg) of ballast.[1][2][4][5]

The keel-equipped version of the boat has a draft of 4.50 ft (1.37 m), while the centerboard-equipped version has a draft of 4.50 ft (1.37 m) with the centerboard extended and 2.50 ft (0.76 m) with it retracted, allowing operation in shallow water.[1][2][4][5]

The design has sleeping accommodation for five people, with a double "V"-berth in the bow cabin, an U-shaped settee in the main cabin around a swing table that converts to a double berth and an aft quarter berth on the starboard side. The galley is located on the starboard side just aft of the bow cabin. The galley is equipped with a two-burner stove and a sink. The head is located just aft of the bow cabin on the port side.[1][2][4][5]

The Half Ton class version was a specially configured model.[1][4]

The design has a hull speed of 6.18 kn (11.45 km/h).[4][5]

Operational history

The boat is supported by an active class club that organizes racing events, the Half Ton Class.[8]

See also

References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 McArthur, Bruce (2022). "Seafarer 29 sailboat". sailboatdata.com. https://sailboatdata.com/sailboat/seafarer-29. 
  2. 2.0 2.1 2.2 2.3 2.4 McArthur, Bruce (2022). "Seafarer 29 CB sailboat". sailboatdata.com. https://sailboatdata.com/sailboat/seafarer-29-cb. 
  3. McArthur, Bruce (2022). "McCurdy & Rhodes". sailboatdata.com. https://sailboatdata.com/designer/mccurdy-rhodes. 
  4. 4.0 4.1 4.2 4.3 4.4 4.5 4.6 Sea Time Tech, LLC (2022). "Seafarer 29". sailboat.guide. https://sailboat.guide/seafarer/29. 
  5. 5.0 5.1 5.2 5.3 5.4 5.5 Sea Time Tech, LLC (2022). "Seafarer 29 CB". sailboat.guide. https://sailboat.guide/seafarer/29-cb. 
  6. McArthur, Bruce (2022). "Seafarer Yachts 1965 - 1985". sailboatdata.com. https://sailboatdata.com/builder/seafarer-yachts. 
  7. Sea Time Tech, LLC (2022). "Seafarer Yachts". sailboat.guide. https://sailboat.guide/seafarer. 
  8. McArthur, Bruce (2022). "Half Ton Class". sailboatdata.com. https://sailboatdata.com/association/half-ton-class.