Engineering:Vibrating belt machine
A vibrating belt machine is a device that was promoted to passively reduce body fat through the use of an oscillating or vibrating belt around the exercise subject's waist, without active exercise by the user. The device was widely promoted in the 1950s and 1960s as a way to break up abdominal fat through vibration.
Early versions were devised by Swiss physician and inventor Gustav Zander in the late 19th century. Zander's machines were intended as a means of massage.[1] Another version was promoted beginning in 1927 by John Harvey Kellogg at his Battle Creek Sanitarium, as the "Battle Creek Health Builder," with claims of additional health benefits. By the 1950s, similar devices were marketed to passively reduce fat. The devices became a common comedic element in television shows, seen in I Love Lucy and The Flintstones.[2] They remained popular through the 1960s, but fell out of fashion by the 1980s, when it had become clear that they had no fat-reducing benefits.[3]
The devices usually consisted of a platform on which the subject could stand, with a post extending upward to waist level, mounting an electric motor. One or two wide fabric belts were attached to the motor. Leaning away from the motor, a subject could "exercise" the desired portion of their body.[1][2]
See also
- Whole-body vibration
References
- ↑ 1.0 1.1 "Belt Vibrator". Kansas State Historical Society. July 2017. https://www.kshs.org/kansapedia/belt-vibrator/15638.
- ↑ 2.0 2.1 Hix, Lisa (May 26, 2011). "Too Lazy To Work Out? Machines That Exercise for You, From Victorian Era to Now". Collectors Weekly. https://www.collectorsweekly.com/articles/machines_that_exercise_for_you/.
- ↑ Hall, Landon (October 10, 2013). "RetroFit: Good, but useless, vibrations". Orange County Register. https://www.ocregister.com/2013/10/10/retrofit-good-but-useless-vibrations/.
 |  |
