Engineering:Jeep Tornado engine

From HandWiki
Revision as of 16:53, 4 February 2024 by S.Timg (talk | contribs) (update)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: American automobile engine


Jeep Tornado
1963 Jeep Pickup FL engine-L.jpg
Overview
Manufacturer
  • Kaiser-Jeep
  • Industrias Kaiser Argentina (IKA)
  • Renault Argentina
Also called
  • Torino (IKA)
  • Tornado Jet (IKA)
  • Tornado Interceptor (Renault)
Production1962-1973
Layout
Displacement230.51 cu in (3,777 cc)
Cylinder bore3 11⁄32 in (84.93 mm)
Piston stroke4 3⁄8 in (111.13 mm)
Block materialIron
Head materialIron
ValvetrainSOHC
Compression ratio8.5:1 or 7.5:1
Output
Power output
  • 140 hp (104 kW; 142 PS) at 4000 rpm (high compession) or
  • 133 hp (99 kW; 135 PS) at 4000 rpm (low compression)
Specific power
  • 0.61 hp/in³ or
  • 0.58 hp/in³
Torque output
  • 210 lb⋅ft (285 N⋅m) at 1750 rpm or
  • 199 lb⋅ft (270 N⋅m) at 2400 rpm
Chronology
PredecessorWillys Super Hurricane
SuccessorAMC straight-6 engine
1963 Jeep Tornado engine

The Jeep Tornado engine was the first post-World War II U.S.-designed mass-produced overhead cam (OHC) automobile engine.[1] The 230.5 cu in (3.78 L) straight-six was introduced in mid-year 1962, and replaced the flathead "6-226" Willys Super Hurricane that was in use since 1954.

The Tornado engine was also manufactured in Argentina by Industrias Kaiser Argentina (IKA) from 1965 until 1973.

History

The development of a new engine for Kaiser Jeep for an entirely new vehicle began under Chief Engineer, A.C. "Sammy" Sampietro, in the late-1950s.[2] Sampietro worked under Donald Healey in Europe and focused on improving power output through better engine breathing.[2] The single overhead cam design was combined with hemispheric combustion chambers.[3] Mass production of the new engine began in 1962.

The Jeep Tornado engine was introduced in the Willys Jeep Wagon and truck models.[4] Six-cylinder versions built after 3 May 1962, received the 230 OHC "Tornado" engine, replacing the 226 L-head "Super Hurricane" I6.[5] It was made the standard engine in the completely new Jeep Wagoneer station wagons (today called SUVs) and Jeep Gladiator pickup trucks that began production in fall 1962 for the 1963 model year.[6]

The Tornado was the only U.S.-built overhead-cam engine in mass production at that time.[7] The new engine was designed for robust, heavy-duty performance with maximum efficiency. Its excellent fuel economy was proven in tests with the Tornado-OHC engine having the lowest specific fuel consumption of all production gasoline engines on the market.[8]

Design

The Tornado, like most Jeep engines, was undersquare for better low-speed torque. It had a 3 11⁄32 in (84.93 mm) bore with a 4 3⁄8 in (111.13 mm) stroke. The standard version had an 8.5:1 compression ratio. Output rating was 140 hp (104 kW; 142 PS) at 4000 rpm and 210 lb⋅ft (285 N⋅m) of torque at 1750 rpm. The engine's actual torque curve indicated achieving the 210 pounds-feet rating before 1000 rpm and then continuing at that level to approximately 3700 rpm.[9]

A low-compression (7.5:1) version was also available, with 133 hp (99 kW; 135 PS) at 4000 rpm and 199 lb⋅ft (270 N⋅m) of torque at 2400 rpm. These were "high-efficiency" engines with a conservatively rated power output.[10]

Unique features of the design included the camshaft that only had six lobes. One lobe operated both the intake and exhaust valves for each cylinder. This made engineering cam profiles more difficult than conventional two lobes per cylinder (one per valve) designs, but allowed the valves to be better arranged for the cross-flow head.[11] Valves were directly opposite their respective ports, and ports were short with wide radius turns. Another innovation was the crankshaft that was strengthened by ferritic nitrocarburizing by a special salt bath for two hours at 1,025 °F (552 °C).[3] This was one of the initial applications of this hardening process by an engine manufacturer.[9] The silent-type "morse chain" was also special because it was covered with chilled cast iron for long life and compatibility with the cam lobes.[3] Additionally, many of the parts on the engine were made of aluminum, including the front cover, water pump, valve cover, and intake manifold, thus making it weigh 575-pound (261 kg), or about 40-pound (18 kg) lighter compared to the previous "6-226" Super Hurricane engine.[9]

The new engine's overhead camshaft design was only one of the advanced features offered for the first time in a U.S.-designed and mass-produced engine.[10] The Tornado was a good engine; unfortunately, it was complex (by 1960s standards) and was discontinued in civilian vehicles in the U.S. in 1965. Initial production engines had problems with oil leaks and consumption. Although an easy fix under warranty and then in later production, because owners did not check the oil level until it was too late, engine failures were reported and thus negative opinions about the new engine.[9]

The engine continued to be used in military versions of the Jeep pickup, the M-715, and the M-725, until 1969. These engines had block-mounted motor mounts, rather than the front cover mounts that were a cause of oil leaks on the civilian versions.[12]

Road tests of the new Jeep Wagoneer by Car Life magazine described the OHC six as "commendably smooth and quiet."[13] The engine accelerated the four-wheel-drive full-size station wagon (the SUV designation was not yet known) with an automatic transmission from 0 to 60 mph in 15.9 seconds.[13] Their tests recorded 17 mpg‑US (14 L/100 km; 20 mpg‑imp) on the highway and 14.5 mpg‑US (16.2 L/100 km; 17.4 mpg‑imp) in the city."[13]

Production

Torino OHC engine in an TS IKA-Renault Torino
Torino OHC engine in an ZX IKA-Renault Torino

Production of this engine continued in Argentina by Industrias Kaiser Argentina (IKA) after 1965. The OHC engine was used in a variety of Jeep vehicles as well as American Motors Corporation (AMC) passenger cars that were assembled under license.[14] The engine became best known for powering the IKA-Renault Torino, a hybrid version of the AMC Rambler American and Rambler Classic having unique styled front and rear body parts that were built in Argentina from 1966 through 1981.

The IKA Torino and the OHC engine achieved auto racing success including international recognition in the 1969 Nürburgring 84-hour endurance race. The Argentinian team ran three cars and after three and a half days of racing, the No. 3 Torino covered 334 laps, the most of all the racers: about 9,450 kilometres (5,872 mi).[15][16][17] However, it placed third overall due to penalty points.[17]

The engine name was changed to "Torino" to match the car in 1973. It also received a major block and crankshaft refinement that year — seven main bearings instead of the original four as well as a new cylinder head.[18] Industrias Kaiser Argentina was eventually bought out by Renault, and in 1975, the "IKA" name was dropped and it became "Renault Argentina". The Torino, Jeeps, and AMC cars, as well as the Tornado engine, continued to receive upgrades over the years.

The Argentinian Tornado engines raised output from 155 to 215 hp (116 to 160 kW; 157 to 218 PS) (street versions) and 250 to 350 hp (186 to 261 kW; 253 to 355 PS) (Racing versions). This was achieved by a new cylinder head which improved the intake and exhaust ducts. Also adopted was a new camshaft, a new exhaust manifold of a 3-1/3-1 type, two 2-inch diameter exhaust pipes, as well as three Weber DCOE 45-45 side-draft carburetors.

The Torino and the Jeep Tornado engine continued production through 1982. It was marketed as the "Tornado Jet", and later as the "Tornado Interceptor", in AMC design automobiles built by IKA.[14] From 1976 until 1982, they were the only non-Renault–designed cars and engines built by the French company.[19]

Applications

The Jeep Tornado engine was used in the following vehicles:

References

  1. ↑ "Kaiser Jeep", Ward's Automotive Yearbook 26: p. 137, 1964 
  2. ↑ 2.0 2.1 Allen, Jim (August 2006). "Back To The Future: The Strange Life of Jeep's OHC 230". Off-road Adventures. http://www.oramagazine.com/pastIssues/0806-issue/index.asp?article=oldiron. Retrieved 16 January 2023. 
  3. ↑ 3.0 3.1 3.2 Page, Ben (2006). "Tornado 230 CI Engine Information / History". The International Full Size Jeep Association. http://www.ifsja.org/tech/motors/tornado.html. 
  4. ↑ Foster, Patrick R. (2004). The Story of Jeep. KP Books. p. 111. ISBN 978-0-87349-735-0. 
  5. ↑ Allen, Jim (2004). Jeep. Motorbooks International. p. 111. ISBN 978-0-7603-1979-6. https://books.google.com/books?id=zTsAbTJB5RIC&q=Jeep+Tornado+OHC+engine&pg=PA111. Retrieved 16 January 2023. 
  6. ↑ "Meet the beautiful brute - Jeep Gladiator (advertisement)". Life 53 (23): 23. 30 November 1962. https://books.google.com/books?id=rUoEAAAAMBAJ&q=Jeep+Tornado+OHC+engine&pg=PA23. Retrieved 16 January 2023. 
  7. ↑ Martin, Murilee (26 September 2013). "Valve Cover From First Mass-Produced American OHC Engine Makes Perfect Garage Wall Art". Autoweek. https://www.autoweek.com/car-life/a1938981/valve-cover-first-mass-produced-american-ohc-engine-makes-perfect-garage-wall-art/. "... the Offenhauser was used in boats and race cars and doesn't count as "mass-produced"..." 
  8. ↑ Foster, Patrick (1 January 2008). "1963 Jeep Wagoneer: Landmark Vehicle". FourWheeler (Motor Trend). https://www.motortrend.com/features/0801-4wd-1963-jeep-wagoneer/. 
  9. ↑ 9.0 9.1 9.2 9.3 Allen, Jim (30 October 2018). "Classic Engine: Jeep's Tornado Straight-Six". https://www.cars.com/articles/classic-engine-jeeps-tornado-straight-six-454372/. 
  10. ↑ 10.0 10.1 "Overhead Camshaft Design is Feature of New Willys 140 H.P. 6-cyl Engine". Autodriver: 23. 1961. https://books.google.com/books?id=SCALAQAAIAAJ&q=Jeep+Tornado+OHC+engine. Retrieved 16 January 2023. 
  11. ↑ Allen, Jim (12 June 2012). "Classic Engine: Jeep's Tornado Straight-Six". https://news.pickuptrucks.com/2012/06/classic-engine-jeeps-tornado-straight-six.html. 
  12. ↑ Allen, Jim (2007). Jeep 4x4 Performance Handbook (Second ed.). Motorbooks/MBI. p. 195. ISBN 978-0-7603-2687-9. https://books.google.com/books?id=X95PU39mzSMC&q=1963-1967+230+%22Tornado%22+OHC+Six-+Cylinder+Applications:&pg=PA195. Retrieved 16 January 2023. 
  13. ↑ 13.0 13.1 13.2 "1963-1992 Jeep Wagoneer and Grand Wagoneer". 29 August 2007. https://auto.howstuffworks.com/1963-1992-jeep-wagoneer-and-grand-wagoneer.htm. 
  14. ↑ 14.0 14.1 MacDonald, John. "Old Cars of Argentina - Manufactured by Industrias Kaiser Argentina S.A. (IKA)". oldcarandtruckpictures.com. http://oldcarandtruckpictures.com/Argentina/Argentinajamc.html. 
  15. ↑ Orosz, Peter (3 August 2011). "When Argentina ruled the Nürburgring". Jalopnik. https://jalopnik.com/when-argentina-ruled-the-nurburgring-5827242. 
  16. ↑ de Jong, Frank. "1969 Nurburgring 84hrs". http://touringcarracing.net/Races/1969%20Nurburgring%2084hrs.html. 
  17. ↑ 17.0 17.1 Colombiano, Alvaro (7 December 2017). "These Are The Argentinian-Built IKA Torinos That Dominated The Nürburgring In 1969". https://petrolicious.com/articles/these-are-the-ika-renault-torinos-that-dominated-the-nordschleife-in-1969. 
  18. ↑ McGuire, Bill (28 August 2021). "The Argentine Rambler GT Too Good For the USA: IKA Torino". Mac's Motor City Garage. https://macsmotorcitygarage.com/the-argentine-rambler-gt-too-good-for-the-usa-ika-torino/. 
  19. ↑ "Renault Torino GR (1982 MY)". https://www.carfolio.com/renault-torino-gr-78507?car=78507. 

External links



Retrieved from "https://handwiki.org/wiki/index.php?title=Engineering:Jeep_Tornado_engine&oldid=3249798"