Engineering:Windrose 20
| Development | |
|---|---|
| Designer | Ron Holder |
| Location | United States |
| Year | 1977 |
| Builder(s) | Laguna Yachts |
| Role | Cruiser |
| Boat | |
| Boat weight | 1,650 lb (748 kg) |
| Draft | 4.50 ft (1.37 m) |
| Hull | |
| Type | monohull |
| Construction | fiberglass |
| LOA | 20.00 ft (6.10 m) |
| LWL | 16.00 ft (4.88 m) |
| Beam | 7.50 ft (2.29 m) |
| Engine type | outboard motor |
| Hull appendages | |
| Keel/board type | stub keel and centerboard |
| Rudder(s) | transom-mounted rudder |
| Rig | |
| Rig type | Bermuda rig |
| I (foretriangle height) | 21.00 ft (6.40 m) |
| J (foretriangle base) | 8.00 ft (2.44 m) |
| P (mainsail luff) | 21.00 ft (6.40 m) |
| E (mainsail foot) | 8.00 ft (2.44 m) |
| Sails | |
| Sailplan | fractional rigged sloop |
| Mainsail area | 84.00 sq ft (7.804 m2) |
| Jib/genoa area | 84.00 sq ft (7.804 m2) |
| Total sail area | 168.00 sq ft (15.608 m2) |
The Windrose 20 is an American trailerable sailboat that was designed by Ron Holder as a cruiser and first built in 1977.[1][2][3][4]
Production
The design was built by Laguna Yachts in the United States , starting in 1977, but it is now out of production.[1][2][5][6]
Design
The Windrose 20 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig, a raked stem, a plumb transom, a transom-hung rudder controlled by a tiller and a fixed stub keel and retractable centerboard. It displaces 1,650 lb (748 kg).[1][2]
The boat has a draft of 4.50 ft (1.37 m) with the centerboard extended and 1.00 ft (0.30 m) with it retracted, allowing operation in shallow water, beaching or ground transportation on a trailer.[1][2]
The boat is normally fitted with a small outboard motor for docking and maneuvering.[1][2]
The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and two straight settee berths in the main cabin. The galley is located on the starboard side amidships. The head is located in the bow cabin on the port side under the "V"-berth.[1][2]
For sailing the design may be equipped with one of several sized of jibs or genoas.[2]
The design has a hull speed of 5.36 kn (9.93 km/h).[2]
See also
References
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 McArthur, Bruce (2022). "Windrose 20 sailboat". sailboatdata.com. https://sailboatdata.com/sailboat/windrose-20.
- ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Sea Time Tech, LLC (2022). "Windrose 20". sailboat.guide. https://sailboat.guide/laguna/windrose-20.
- ↑ McArthur, Bruce (2022). "Ron Holder". sailboatdata.com. https://sailboatdata.com/designer/holder-ron.
- ↑ Sea Time Tech, LLC (2022). "Ron Holder". sailboat.guide. https://sailboat.guide/ron-holder.
- ↑ McArthur, Bruce (2022). "Laguna Yachts". sailboatdata.com. https://sailboatdata.com/builder/laguna-yachts.
- ↑ Sea Time Tech, LLC (2022). "Laguna Yachts". sailboat.guide. https://sailboat.guide/laguna.
External links
 |  |
