Engineering:Altos 586

From HandWiki
Revision as of 19:58, 4 February 2024 by Steve Marsio (talk | contribs) (over-write)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Microcomputer
Altos 586
Altos586Logo.jpg
ManufacturerAltos Computer Systems
TypeMicrocomputer
Release date1983 (1983)
Introductory priceUS$7,990–10,990
(circa US$20,500–28,200 today)
Media1 MB floppy drive
Operating systemXenix or MP/M-86
CPUIntel 8086 16 bit @ 10 MHz
Memory512 KB to 1 MB RAM; 12, 32, and 42 MB hard drive options
Connectivity8x RS-232C serial port, expandable to 16; parallel printer port

The Altos 586 is a multi-user microcomputer that was intended for the business market. It was introduced by Altos Computer Systems in 1983.[1] A configuration with 512 KB of RAM, an Intel 8086 processor, Microsoft Xenix, and 10 MB hard drive cost about US$8,000.[2] 3Com offered this Altos 586 product as a file server for their IBM PC networking solution in spring 1983.[citation needed] The network was 10BASE2 (thin-net) based, with an Ethernet AUI port on the Altos 586.

Reception

BYTE in August 1984 called the Altos 586 "an excellent multiuser UNIX system", with "the best performance" for the price among small Unix systems. The magazine reported that a US$10,000 (equivalent to $24,600 in 2019)[3] Altos with 512 KB RAM and 40 MB hard drive "under moderate load approaches DEC VAX performance for most tasks that a user would normally invoke."[4] A longer review in March 1985 stated that "despite some bugs, it's a good product." It criticized the documentation and lack of customer service for developers, but praised the multiuser performance. The author reported that his 586 had run a multiuser bulletin board system 24 hours a day for more than two years with no hardware failures. He concluded that "Very few UNIX or XENIX computers can provide all of the features of the 586 for $8990", especially for multiuser turnkey business users.[5]

See also

  • Fortune XP 20[6]

References