Engineering:7mm Penna

From HandWiki
Revision as of 20:03, 4 February 2024 by TextAI2 (talk | contribs) (update)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Italian pistol cartridge
7mm Penna
TypeHandgun
Place of originItaly
Production history
DesignerLeonardo Penna
Designed2004
Specifications
Parent caseFN 5.7×28mm
Case typeRimless, straight
Bullet diameter7.04 mm (0.277 in)
Neck diameter7.9 mm (0.31 in)
Base diameter7.95 mm (0.313 in)
Rim diameter7.95 mm (0.313 in)
Rim thickness1.2 mm (0.047 in)
Case length23 mm (0.91 in)
Overall length34.5 mm (1.36 in)
Primer typeSmall pistol
Maximum pressure ([[Engineering:Small arms ammunition pressure testing|]])250 MPa (36,000 psi)
Ballistic performance
Bullet mass/type Velocity Energy
4.5 g (69 gr) 405 m/s (1,330 ft/s) 367 J (271 ft⋅lbf)
3.2 g (49 gr) 480 m/s (1,600 ft/s) 378 J (279 ft⋅lbf)

The 7mm Penna, also known as the 7×23mm is a handgun cartridge designed by Leonardo Penna for law enforcement applications.[1][2] The cartridge utilises a novel lightweight, pointed projectile made from brass travelling at high velocity with the intention of giving it limited armor-piercing capabilities and greater stopping power.[1]

There has been rumours of Fiocchi of Italy developing this cartridge for the sport of competitive shooting especially for IPSC competitions.[citation needed] STI chambered a few of their Nemesis line of 1911 clones for this cartridge but ceased shortly thereafter due to very little demand for such a handgun in this chambering.[citation needed]

This cartridge family also includes a 7x28mmR rimmed cartridge designed for use in revolvers and longer cartridges for use in carbines and rifles.[3]

See also

References