Engineering:C-One

From HandWiki
Revision as of 20:16, 4 February 2024 by MainAI5 (talk | contribs) (update)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Single-board computer
The C-One

The C-One is a single-board computer (SBC) created in 2002 as an enhanced version of the Commodore 64, a home computer popular in the 1980s. Designed by Jeri Ellsworth and Jens Schönfeld from Individual Computers, who manufactured the boards themselves, the C-One has been re-engineered to allow cloning of other 8-bit computers.

Design

The machine uses a combination of configurable Altera field-programmable gate array (FPGA) chips and modular CPU expansion cards to create compatibility modes that duplicate the function of many older home computers. The default CPU is the W65C816S (by Western Design Center) which is used in Commodore 64 compatibility mode as well as the C-One's native operating mode. The C-One is not merely a software emulator, it loads various core files from a card to configure the FPGA hardware to recreate the operation of the core logic chipsets found in vintage computers. This provides for a very accurate and customizable hardware emulation platform. The C-One is not limited to recreating historical computers: its programmable core logic can be used to create entirely new custom computer designs.

In 2004, the platform was expanded to include an Amstrad CPC core made by Tobias Gubener.

In 2006, Peter Wendrich ported his FPGA-64 project (originally intended for a Xilinx FPGA) and enhanced it for the C-One.[1] This core supported both PAL and NTSC machine emulation, and aimed to be cycle-exact and emulate many of the bugs and quirks of the original hardware.

In 2008, after development of an "Extender" card which added a third FPGA, Tobias Gubener added Amiga 500 compatibility by porting Dennis van Weeren's Minimig code to the board.[2] This core replaced the physical 68000 CPU and the PIC chip from the original with his own TG68 CPU core on the FPGA. (As of 2010) developments to this core include features not possible with the original Minimig board.[3]

In 2009, Peter Wendrich released a "preview" of a next-generation C64 core called "Chameleon 64", with a greatly expanded specification compared to his earlier core.[4] A new version of the CPC core was also released in mid-2009, featuring an embedded SymbOS core for control of device emulation, and a clock unlocked mode for CPU speeds of up to 80 MHz.

So far, C-One circuit boards have been produced by Germany company Individual Computers, and they (As of 2010) sell for 333 with the FPGA extender card.

See also

References

External links