Physics:Hume-Rothery rules

From HandWiki
Revision as of 05:03, 5 February 2024 by WikiG (talk | contribs) (fixing)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Rules for elements dissolving in a solid metal

Hume-Rothery rules, named after William Hume-Rothery, are a set of basic rules that describe the conditions under which an element could dissolve in a metal, forming a solid solution. There are two sets of rules; one refers to substitutional solid solutions, and the other refers to interstitial solid solutions.

Substitutional solid solution rules

For substitutional solid solutions, the Hume-Rothery rules are as follows:

  1. The atomic radius of the solute and solvent atoms must differ by no more than 15%:[1]
    [math]\displaystyle{ \% \text{ difference} = \left ( \frac{r_\text{solute} - r_\text{solvent}}{r_\text{solvent}} \right ) \times 100\% \le 15\%. }[/math]
  2. The crystal structures of solute and solvent must be similar.
  3. Complete solubility occurs when the solvent and solute have the same valency.[2] A metal is more likely to dissolve a metal of higher valency, than vice versa. [3] [4] [5]
  4. The solute and solvent should have similar electronegativity. If the electronegativity difference is too great, the metals tend to form intermetallic compounds instead of solid solutions.

Interstitial solid solution rules

For interstitial solid solutions, the Hume-Rothery Rules are:

  1. Solute atoms should have a smaller radius than 59% of the radius of solvent atoms. [6][7]
  2. The solute and solvent should have similar electronegativity.[8]
  3. Valency factor: two elements should have the same valence. The greater the difference in valence between solute and solvent atoms, the lower the solubility.

Solid solution rules for multicomponent systems

Fundamentally, the Hume-Rothery rules are restricted to binary systems that form either substitutional or interstitial solid solutions. However, this approach limits assessing advanced alloys which are commonly multicomponent systems. Free energy diagrams (or phase diagrams) offer in-depth knowledge of equilibrium restraints in complex systems. In essence the Hume-Rothery rules (and Pauling's rules) are based on geometrical restraints. Likewise are the advancements being done to the Hume-Rothery rules. Where they are being considered as critical contact criterion describable with Voronoi diagrams.[9] This could ease the theoretical phase diagram generation of multicomponent systems.

For alloys containing TM elements there is a difficulty in interpretation of the Hume-Rothery electron concentration rule as the e/a values for transition metals have been quite controversial for a long time and no satisfied solutions have yet emerged.[10][11]

See also

References

  1. ↑ Callister, William D.; Rethwisch, David G. (January 2018) (in English). Materials Science and Engineering: An Introduction (10th ed.). Wiley. pp. 992. ISBN 978-1-119-40549-8. 
  2. ↑ Foundations of Materials Science and Engineering, 4th ed., W. Smith and J. Hashemi, pp.139-140 (2006).
  3. ↑ Callister, William D.; Rethwisch, David G. (January 2018) (in English). Materials Science and Engineering: An Introduction (10th ed.). Wiley. pp. 992. ISBN 978-1-119-40549-8. 
  4. ↑ VALENCY EFFECTS AND RELATIVE SOLUBILITIES IN TRANSITION METAL ALLOYS D. A. Goodman* and L. H. Bennett National Bureau of Standards, Washington DC, 20234 R. E. Watson Brookhaven National Laboratory.
  5. ↑ "Solid Solutions: The Hume-Rothery Rules". https://www.phase-trans.msm.cam.ac.uk/2004/titanium/hume.rothery.html. 
  6. ↑ "The Structure of Metals - PPT video online download". http://slideplayer.com/slide/7666224/. 
  7. ↑ "Introduction the properties and behavior of metals (And alloys) depend on their: Structure Processing history and Composition Engr PPT video online download". http://slideplayer.com/slide/5866092/. 
  8. ↑ "Hume-Rothery Rules". Van Nostrand's Scientific Encyclopedia. John Wiley & Sons, Inc. 2002. 
  9. ↑ Wang, Zhijun; Huang, Yunhao; Liu, C. T.; Li, Junjie; Wang, Jincheng (4 Apr 2019), "Atomic packing and size effect on the Hume-Rothery rule", Intermetallics 109: 139–144, doi:10.1016/j.intermet.2019.04.001, https://scholars.cityu.edu.hk/en/publications/publication(b2f047b9-0158-4222-8e81-466e100550b3).html 
  10. ↑ Gao, Michael C (2016). High-Entropy Alloys: Fundamentals and Applications.. 
  11. ↑ Mizutani, Uichiro; Sato, Hirokazu (January 2017). "The Physics of the Hume-Rothery Electron Concentration Rule" (in en). Crystals 7 (1): 9. doi:10.3390/cryst7010009. ISSN 2073-4352. 

Further reading



Retrieved from "https://handwiki.org/wiki/index.php?title=Physics:Hume-Rothery_rules&oldid=3282521"