Chemistry:Charcoal iron

From HandWiki
Revision as of 01:10, 6 February 2024 by Wincert (talk | contribs) (correction)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Charcoal iron is the substance created by the smelting of iron ore with charcoal.

All ironmaking blast furnaces were fueled by charcoal until Abraham Darby introduced coke as a fuel in 1709. The more economical coke soon replaced charcoal in British furnaces, but in the United States , where timber for charcoal was abundant, charcoal furnaces lingered much longer. Even after the introduction of anthracite smelting to the US in 1839,[1] and the development of American coke production later in the century, charcoal iron continued to find favor because of its heat-resistance, toughness, and malleability. The last charcoal furnace in the US did not close until 1945.[2]

In Britain, the penultimate furnace built was Alderwasley in 1764, followed by Warsash Furnace in 1869.[3] The last working furnace at Backbarrow converted to coke in 1922.

In Western Australia, pig iron was made using charcoal between 1948 and 1981 at Wundowie.[4] At its peak, operating two charcoal-fueled blast furnaces, the Wundowie charcoal iron and wood distillation plant produced 52,262 tons of iron in 1960/61.[4]

There are still charcoal-based iron and steel making operations in the Brazilian state of Minas Gerais.[5][6][7]

The traditional Japanese tatara furnace uses charcoal and ironsand to produce a mixture of iron and steel. Small quantities are still made by the Nittoho Tatara in Japan. The tatara smelting process involves direct reduction and—unlike a blast furnace—at no time is the product fully molten. The smelted iron remains in the furnace for an extended period until much of the iron has converted to tamahagane, a steel suitable for making swords.

See also

  • Harrison Ainslie
  • Wundowie charcoal iron and wood distillation plant

References

Bibliography