Template:Infobox vacuum tube/doc
From HandWiki
< Template:Infobox vacuum tube
Revision as of 22:02, 25 November 2020 by imported>Jworkorg (1 revision imported)
![]() | This is a documentation subpage for Template:Infobox vacuum tube It may contain usage information, categories and other content that is not part of the original template page. |
![]() | This template uses Lua: |
Usage
{{Infobox vacuum tube | image = | caption = | classification = <!-- Mandatory --> | service = | height = <!-- inches --> | diameter = <!-- inches --> | weight = <!-- pounds --> <!-- Cathode --> | cathode_type = <!-- Mandatory --> | heater_voltage = | heater_current = | filament_voltage = | filament_current = <!-- Anode --> | max_dissipation = | max_current = <!-- use either max_dissipation or max_current --> | max_voltage = <!-- Socket Connections --> | pinout = <!-- Class A amplifier ops --> | class_a_amplification_factor = | class_a_anode_voltage = | class_a_anode_current = | class_a_screen_voltage = | class_a_bias_voltage = | class_a_anode_resistance = <!-- Class C amplifier ops --> <!-- Recommend the use of highest hated CCS specification --> | class_c_power_output = | class_c_anode_voltage = | class_c_anode_current = | class_c_screen_voltage = | class_c_bias_voltage = <!-- Class AB amplifier ops --> <!-- Recommend the use of highest hated CCS specification --> | class_ab_power_output = | class_ab_anode_resistance = | class_ab_anode_voltage = | class_ab_anode_current = | class_ab_screen_voltage = | class_ab_bias_voltage = | reference = }}
Parameters
- image - Picture of the vacuum tube
- caption - Caption for the picture
- classification - Mandatory Field exampled include: cold cathode regulator, diode dual diode, triode, dissimilar triode, tetrode, beam tetrode, pentode etc.
- service - Common application of the tube examples include, Class A amplifier, AF modulator, RF amplifier
- height - Units expressed in inches, script includes converter to cm
- diameter - Units expressed in inches, script includes converter to cm
- weight - Units expressed in pounds, script includes converter to kg
- cathode_type - Mandatory field identifying the type of cathode. Examples include, cold cathode, indirectly heater, directly heated
- heater_voltage - Applicable to indirectly heated tubes
- heater_current
- filament_voltage - Applicable to directly heated tubes
- filament_current
- max_dissipation - The amount of power the tube may safety dissipate. Recommend the Continuous Commercial Service (CCS) specification be listed.
- max_current - Maximun anode current. Recommend the Continuous Commercial Service (CCS) specification be listed.
- max_voltage - Maximum CCS anode dissipation
- pinout - Picture of the tube socket pinout
- typical application - Options are presented for Class A, Class AB, and for class C. Recommend the largest CCS specification be listed.
- reference - List the source of the specification
Units
Note that all units are given in inches and pounds. The script includes a converters to automatically convert to cm and kg.
Example
Infobox vacuum tube/doc | |
---|---|
![]() RCA 12AX7 | |
Classification | Dual Triode |
Service | Class-A amplifier |
Height | 2.2 in (56 mm) |
Diameter | 0.8 in (20 mm) |
Cathode | |
Cathode type | Indirectly heated |
Heater voltage | Series / Parallel 12.6 / 6.3 |
Heater current | Series / Parallel 150 / 300 mA |
Anode | |
Max dissipation Watts | 1.2 per section |
Max voltage | 330 |
Max current | 3.6mA |
Socket connections | |
![]() | |
Typical class-A amplifier operation | |
Amplification factor | 100 |
Anode voltage | 100 |
Anode current | 0.5 mA |
Bias voltage | -1 |
Anode resistance | 80000 |
References | |
1) Essential Characteristics, General Electric, 1973 |
{{Infobox vacuum tube | image = [[File:RCA12ax7.jpg|45x110px]] | caption = RCA 12AX7 | classification = Dual Triode <!-- Mandatory --> | service = [[Class A amplifier]] | height = 2.2 <!-- inches --> | diameter = 0.8 <!-- inches --> | weight = <!-- pounds --> <!-- Cathode --> | cathode_type = Indirectly heated <!-- Mandatory --> | heater_voltage = Series / Parallel <br /> 12.6 / 6.3 | heater_current = Series / Parallel <br /> 150 / 300 mA | filament_voltage = | filament_current = <!-- Anode --> <!-- use either max_dissipation or max_current --> | max_dissipation = 1.2 per section | max_current = 3.6mA | max_voltage = 330 <!-- Socket Connections --> | pinout = [[File:EIA-9A.png| 183x78px]] <!-- Class A amplifier ops --> | class_a_amplification_factor = 100 | class_a_anode_voltage = 100 | class_a_anode_current = 0.5 mA | class_a_screen_voltage = | class_a_bias_voltage = -1 | class_a_anode_resistance = 80000 <!-- Class C amplifier ops --> <!-- Recommend the use of highest hated CCS specification --> | class_c_power_output = | class_c_anode_voltage = | class_c_anode_current = | class_c_screen_voltage = | class_c_bias_voltage = <!-- Class AB amplifier ops --> <!-- Recommend the use of highest hated CCS specification --> | class_ab_power_output = | class_ab_anode_resistance = | class_ab_anode_voltage = | class_ab_anode_current = | class_ab_screen_voltage = | class_ab_bias_voltage = | reference = 1) Essential Characteristics, General Electric, 1973 }}
Tracking category