Accident analysis

Short description: Process to determine the causes of accidents to prevent recurrence

Police study the site where a car crashed

Accident analysis is a process carried out in order to determine the cause or causes of an accident (that can result in single or multiple outcomes) so as to prevent further accidents of a similar kind. It is part of accident investigation or incident investigation . These analyses may be performed by a range of experts, including forensic scientists, forensic engineers or health and safety advisers. Accident investigators, particularly those in the aircraft industry, are colloquially known as "tin-kickers". Health and safety and patient safety professionals prefer using the term "incident" in place of the term "accident". Its retrospective nature means that accident analysis is primarily an exercise of directed explanation; conducted using the theories or methods the analyst has to hand, which directs the way in which the events, aspects, or features of accident phenomena are highlighted and explained. These analyses are also invaluable in determining ways to prevent future incidents from occurring. They provide good insight by determining root causes, into what failures occurred that lead to the incident.

Sequence

Accident analysis is generally performed in four key steps. OSHA combines the last two steps into a singular final step of preparing and issuing a report. However, most organizations follow some form of these steps, in this order:

1. Fact gathering: After an accident, a forensic process is started to gather all possibly relevant facts that may contribute to understanding the accident. This can be physical evidence, digital evidence, and/or first-hand accounts from witnesses. In occupational settings, this could also be records of machinery, personnel present, and operating procedures.
2. Fact Analysis: After the forensic process has been completed or at least delivered some results, the facts are put together to give a "big picture." The history of the accident is reconstructed and checked for consistency and plausibility. This is also where the use of analysis methods can come into play.
   

   Hierarchy of Controls from NIOSH
3. Conclusion Drawing: If the accident history is sufficiently informative, conclusions can be drawn. These conclusions can be firm findings that were direct causing factors or they can be a list of possible contributing factors.
4. Counter-measures: In some cases, the development of counter-measures or recommendations are made to prevent further accidents of the same kind. The analysis step can also aid in pointing out other possible risk factors that could be mitigated during this step. These counter measures can be things like the implementation of controls following the hierarchy of controls.

Methods

There exist numerous forms of Accident Analysis methods. These can generally be divided into four main categories which break up how and who completes the analysis.

1. Causal Analysis (Root cause analysis) uses the principle of causality to determine the course of events. Though people casually speak of a "chain of events", results from Causal Analysis usually have the form of directed a-cyclic graphs – the nodes being events and the edges the cause-effect relations. Methods of Causal Analysis differ in their respective notion of causation.
2. Systematic Analysis relies on using a standardized system or model for developing conclusions. This tends to be a rigorous effort that is performed by an expert. This method leaves little room for doubt and can be beneficial by ensuring expert bias does not come into play.
3. Expert Analysis relies on the knowledge and experience of field experts. This form of analysis usually lacks a rigorous (formal/semiformal) methodological approach. This usually affects falsifiability and objectivity of analyses. This is of importance when conclusions are heavily disputed among experts.
4. Organizational Analysis relies on systemic theories of organization. Most theories imply that if a system's behaviour stayed within the bounds of the ideal organization then no accidents can occur. Organizational Analysis can be falsified and results from analyses can be checked for objectivity. Choosing an organizational theory for accident analysis comes from the assumption that the system to be analysed conforms to that theory.

Models

Many models or systems have been developed to characterise and analyse accidents.

Template for an Ishikawa diagram

Some of common models are similar to Hazard Analysis models. When used for accident analysis they are worked in reverse. Instead of trying to identify possibly problems and ways to mitigate those problems, the models are used to find the cause of an incident that has already occurred. Some common types of these models include the Five Why's model, Ishikawa (fishbone) diagram, the Fault Tree Analysis (FTA), or the Failure Mode and Effect Analysis (FMEA).

1. Five Why's Model: Also known as "Why-Because" model, this model uses the idea of breaking an incident up into the fine details. Asking why something occurred, and what occurred that made that happen. It is used to determine exact causes and can extend much beyond a simple "five" whys.
2. Ishikawa Diagram: Takes into account environmental, human, methodical, and equipment causes that can lead to a problem. Using this model, an accident analyst could work backwards from the problem to find and mitigate potential causes.
3. Fault Tree Analysis: Uses a tree type "yes/no" cause and effect analysis to determine potential causes of failures. In accident analysis it could be used to determine leading factors, post-incident. This model works like a flow chart to help show all processes and systems that may have effected the outcome of the incident.
4. Failure Mode and Effect Analysis: This model uses a quantitative value to represent qualitative metrics like probability and severity. These values rank 1–5 with 1 being least probable or least severe and 5 being most probable or severe. The probability and severity values are then placed into a risk matrix to determine the overall risk. This can be beneficial in incident analysis by helping to determine other risk factors that could occur once an incident has happened.

Using photographs to extract evidence

Once all available data has been collected by accident scene investigators and law enforcement officers, camera matching, photogrammetry or rectification can be used to determine the exact location of physical evidence shown in the accident scene photos.

1. Camera matching: Camera matching uses accident scene photos that show various points of evidence. The technique uses CAD software to create a 3-dimensional model of the accident site and roadway surface. All survey data and photos are then imported into a three dimensional software package like 3D Studio Max. A virtual camera can be then be positioned relative to the 3D roadway surface. Physical evidence is then mapped from the photos onto the 3D roadway to create a three dimensional accident scene drawing.
2. Photogrammetry: Photogrammetry is used to determine the three-dimensional geometry of an object on the accident scene from the original two dimensional photos. The photographs can be used to extract evidence that may be lost after the accident is cleared. Photographs from several viewpoints are imported into software like PhotoModeler. The forensic engineer can then choose points common to each photo. The software will calculate the location of each point in a three dimensional coordinate system.
3. Rectification: Photographic rectification is also used to analyze evidence that may not have been measured at the accident scene. Two dimensional rectification transforms a single photograph into a top-down view. Software like PC-Rect can be used to rectify a digital photograph.

Related

• Engineering:Safety engineering – Engineering discipline which assures that engineered systems provide acceptable levels of safety
• Engineering:System accident – Unanticipated interaction of multiple failures in a complex system
• Engineering:Human factors and ergonomics – Designing systems to suit their users
• Debugging – Process of finding and resolving defects or problems within a computer program
• Engineering:Forensic engineering – Investigation of failures associated with legal intervention
• Physics:Forensic science – Application of science to criminal and civil laws
• Swiss cheese model – Model used in risk analysis

External links

• Acci-Maps
• Safety through Organisational Learning (SOL)
• Systems-Theoretic Accident Model and Process (STAMP)
• U.S. National Transportation Safety Board
• Why-Because Analysis (WBA)

Footnotes

• "Accident Investigation". U.S. Department of Labor, Occupational Safety & Health Administration. http://www.osha.gov/SLTC/accidentinvestigation/index.html. 
  • Occupational Safety and Health Administration, U.S. Department of Labor (February 1, 2005). "Standard 29 CFR 1960.29". https://www.osha.gov/laws-regs/regulations/standardnumber/1960/1960.29.