Tag system
In the theory of computation, a tag system is a deterministic model of computation published by Emil Leon Post in 1943 as a simple form of a Post canonical system.[1] A tag system may also be viewed as an abstract machine, called a Post tag machine (not to be confused with Post–Turing machines)—briefly, a finite-state machine whose only tape is a FIFO queue of unbounded length, such that in each transition the machine reads the symbol at the head of the queue, deletes a constant number of symbols from the head, and appends to the tail a symbol-string that depends solely on the first symbol read in this transition. Because all of the indicated operations are performed in a single transition, a tag machine strictly has only one state.
Definitions
A tag system is a triplet (m, A, P), where
- m is a positive integer, called the deletion number.
- A is a finite alphabet of symbols, one of which can be a special halting symbol. All finite (possibly empty) strings on A are called words.
- P is a set of production rules, assigning a word P(x) (called a production) to each symbol x in A. The production (say P(H)) assigned to the halting symbol is seen below to play no role in computations, but for convenience is taken to be P(H) = 'H'.
A halting word is a word that either begins with the halting symbol or whose length is less than m.
A transformation t (called the tag operation) is defined on the set of non-halting words, such that if x denotes the leftmost symbol of a word S, then t(S) is the result of deleting the leftmost m symbols of S and appending the word P(x) on the right. Thus, the system processes the m-symbol head into a tail of variable length, but the generated tail depends solely on the first symbol of the head.
A computation by a tag system is a finite sequence of words produced by iterating the transformation t, starting with an initially given word and halting when a halting word is produced. (By this definition, a computation is not considered to exist unless a halting word is produced in finitely-many iterations. Alternative definitions allow nonhalting computations, for example by using a special subset of the alphabet to identify words that encode output.)
The term m-tag system is often used to emphasise the deletion number. Definitions vary somewhat in the literature (cf. References), the one presented here being that of Rogozhin.[2]
The use of a halting symbol in the above definition allows the output of a computation to be encoded in the final word alone, whereas otherwise the output would be encoded in the entire sequence of words produced by iterating the tag operation.
A common alternative definition uses no halting symbol and treats all words of length less than m as halting words. Another definition is the original one used by (Post 1943) (described in the historical note below), in which the only halting word is the empty string.
Example: A simple 2-tag illustration
This is merely to illustrate a simple 2-tag system that uses a halting symbol.
2-tag system
Alphabet: {a,b,c,H}
Production rules:
a --> ccbaH
b --> cca
c --> cc
Computation
Initial word: baa
acca
caccbaH
ccbaHcc
baHcccc
Hcccccca (halt).
Example: Computation of Collatz sequences
This simple 2-tag system is adapted from (De Mol 2008). It uses no halting symbol, but halts on any word of length less than 2, and computes a slightly modified version of the Collatz sequence.
In the original Collatz sequence, the successor of n is either n/2 (for even n) or 3n + 1 (for odd n). The value 3n + 1 is clearly even for odd n, hence the next term after 3n + 1 is surely 3n + 1/2. In the sequence computed by the tag system below we skip this intermediate step, hence the successor of n is 3n + 1/2 for odd n.
In this tag system, a positive integer n is represented by the word aa...a with n a's.
2-tag system
Alphabet: {a,b,c}
Production rules:
a --> bc
b --> a
c --> aaa
Computation
Initial word: aaa <--> n=3
abc
cbc
caaa
aaaaa <--> 5
aaabc
abcbc
cbcbc
cbcaaa
caaaaaa
aaaaaaaa <--> 8
aaaaaabc
aaaabcbc
aabcbcbc
bcbcbcbc
bcbcbca
bcbcaa
bcaaa
aaaa <--> 4
aabc
bcbc
bca
aa <--> 2
bc
a <--> 1
(halt)
Turing-completeness of m-tag systems
For each m > 1, the set of m-tag systems is Turing-complete; i.e., for each m > 1, it is the case that for any given Turing machine T, there is an m-tag system that emulates T. In particular, a 2-tag system can be constructed to emulate a Universal Turing machine, as was done by (Wang 1963) and by (Cocke Minsky).
Conversely, a Turing machine can be shown to be a Universal Turing Machine by proving that it can emulate a Turing-complete class of m-tag systems. For example, (Rogozhin 1996) proved the universality of the class of 2-tag systems with alphabet {a1, ..., an, H} and corresponding productions {ananW1, ..., ananWn-1, anan, H}, where the Wk are nonempty words; he then proved the universality of a very small (4-state, 6-symbol) Turing machine by showing that it can simulate this class of tag systems.
The 2-tag system is an efficient simulator of universal Turing machines, in [math]\displaystyle{ O(t^4 \ln^2 t) }[/math] time. That is, if [math]\displaystyle{ M }[/math] is a deterministic single-tape Turing machine that runs in time [math]\displaystyle{ t }[/math], then there is a 2-tag system that simulates it in [math]\displaystyle{ O(t^4 \ln^2 t) }[/math] time.[3]
The 2-tag halting problem
This version of the halting problem is among the simplest, most-easily described undecidable decision problems:
Given an arbitrary positive integer n and a list of n+1 arbitrary words P1,P2,...,Pn,Q on the alphabet {1,2,...,n}, does repeated application of the tag operation t: ijX → XPi eventually convert Q into a word of length less than 2? That is, does the sequence Q, t1(Q), t2(Q), t3(Q), ... terminate?
Historical note on the definition of tag system
The above definition differs from that of (Post 1943), whose tag systems use no halting symbol, but rather halt only on the empty word, with the tag operation t being defined as follows:
- If x denotes the leftmost symbol of a nonempty word S, then t(S) is the operation consisting of first appending the word P(x) to the right end of S, and then deleting the leftmost m symbols of the result — deleting all if there be less than m symbols.
The above remark concerning the Turing-completeness of the set of m-tag systems, for any m > 1, applies also to these tag systems as originally defined by Post.
Origin of the name "tag"
According to a footnote in (Post 1943), B. P. Gill suggested the name for an earlier variant of the problem in which the first m symbols are left untouched, but rather a check mark indicating the current position moves to the right by m symbols every step. The name for the problem of determining whether or not the check mark ever touches the end of the sequence was then dubbed the "problem of tag", referring to the children's game of tag.
Cyclic tag systems
A cyclic tag system is a modification of the original tag system. The alphabet consists of only two symbols, 0 and 1, and the production rules comprise a list of productions considered sequentially, cycling back to the beginning of the list after considering the "last" production on the list. For each production, the leftmost symbol of the word is examined—if the symbol is 1, the current production is appended to the right end of the word; if the symbol is 0, no characters are appended to the word; in either case, the leftmost symbol is then deleted. The system halts if and when the word becomes empty.[4]
Example
Cyclic Tag System
Productions: (010, 000, 1111)
Computation
Initial Word: 11001
Production Word
---------- --------------
010 11001
000 1001010
1111 001010000
010 01010000
000 1010000
1111 010000000
010 10000000
. .
. .
Cyclic tag systems were created by Matthew Cook and were used in Cook's demonstration that the Rule 110 cellular automaton is universal.[5] A key part of the demonstration was that cyclic tag systems can emulate a Turing-complete class of tag systems.
Emulation of tag systems by cyclic tag systems
An m-tag system with alphabet {a1, ..., an} and corresponding productions {P1, ..., Pn} is emulated by a cyclic tag system with m*n productions (Q1, ..., Qn, -, -, ..., -), where all but the first n productions are the empty string (denoted by '-'). The Qk are encodings of the respective Pk, obtained by replacing each symbol of the tag system alphabet by a length-n binary string as follows (these are to be applied also to the initial word of a tag system computation):
a1 = 100...00 a2 = 010...00 . . . an = 000...01
That is, ak is encoded as a binary string with a 1 in the kth position from the left, and 0's elsewhere. Successive lines of a tag system computation will then occur encoded as every (m*n)th line of its emulation by the cyclic tag system.
Example
This is a very small example to illustrate the emulation technique.
2-tag system
Production rules: (a --> bb, b --> abH, H --> H)
Alphabet encoding: a = 100, b = 010, H = 001
Production encodings: (bb = 010 010, abH = 100 010 001, H = 001)
Cyclic tag system
Productions: (010 010, 100 010 001, 001, -, -, -)
Tag system computation
Initial word: ba
abH
Hbb (halt)
Cyclic tag system computation
Initial word: 010 100 (=ba)
Production Word
---------- -------------------------------
* 010 010 010 100 (=ba)
100 010 001 10 100
001 0 100 100 010 001
- 100 100 010 001
- 00 100 010 001
- 0 100 010 001
* 010 010 100 010 001 (=abH)
100 010 001 00 010 001 010 010
001 0 010 001 010 010
- 010 001 010 010
- 10 001 010 010
- 0 001 010 010
* 010 010 emulated halt --> 001 010 010 (=Hbb)
100 010 001 01 010 010
001 1 010 010
- 010 010 001
... ...
Every sixth line (marked by '*') produced by the cyclic tag system is the encoding of a corresponding line of the tag system computation, until the emulated halt is reached.
See also
Notes
- ↑ Post 1943.
- ↑ Rogozhin 1996.
- ↑ Woods, Damien; Neary, Turlough (2009-02-17). "The complexity of small universal Turing machines: A survey". Theoretical Computer Science. Computational Paradigms from Nature 410 (4): 443–450. doi:10.1016/j.tcs.2008.09.051. ISSN 0304-3975. https://authors.library.caltech.edu/103354/1/1110.2230.pdf.
- ↑ In a chapter 14 titled "Very Simple Bases for Computability", (Minsky 1967) presents a very readable (and exampled) subsection 14.6 The Problem of "Tag" and Monogenic Canonical Systems (pp. 267–273) (this sub-section is indexed as "tag system"). Minsky relates his frustrating experiences with the general problem: "Post found this (00, 1101) problem "intractable," and so did I, even with the help of a computer." He comments that an "effective way to decide, for any string S, whether this process will ever repeat when started with S" is unknown although a few specific cases have been proven unsolvable. In particular he mentions Cocke's Theorem and Corollary 1964.
- ↑ Cook 2004.
References
- Cocke, John; Minsky, Marvin (1964). "Universality of Tag Systems with P=2". Journal of the Association for Computing Machinery 11: 15–20. doi:10.1145/321203.321206.
- Cook, Matthew (2004). "Universality in Elementary Cellular Automata". Complex Systems 15: 1–40. Archived from the original on 28 May 2016. https://web.archive.org/web/20160528014857/http://www.complex-systems.com/pdf/15-1-1.pdf.
- De Mol, Liesbeth (January 2008). "Tag systems and Collatz-like functions". Theoretical Computer Science 390 (1): 92–101. doi:10.1016/j.tcs.2007.10.020.
- Minsky, Marvin L. (November 1961). "Recursive Unsolvability of Post's Problem of "Tag" and other Topics in Theory of Turing Machines". Annals of Mathematics. 2 74 (3): 437–455. doi:10.2307/1970290.
- Minsky, Marvin L. (1967). Computation: Finite and Infinite Machines. Englewoord Cliffs, N.J.: Prentice–Hall. pp. 267–273. ISBN 978-0131655638. https://archive.org/details/computationfinit0000mins/page/267.
- Post, Emil (1943). "Formal reductions of the combinatorial decision problem". American Journal of Mathematics 65 (2): 197–215. doi:10.2307/2371809. https://archive.org/details/sim_american-journal-of-mathematics_1943-04_65_2/page/197. (Tag systems are introduced on p. 203ff.)
- Rogozhin, Yurii (20 November 1996). "Small Universal Turing Machines". Theoretical Computer Science 168 (2): 215–240. doi:10.1016/S0304-3975(96)00077-1.
- Wang, Hao (1963). "Tag Systems and Lag Systems". Mathematische Annalen 152: 65–74. doi:10.1007/BF01343730.
External links
- https://mathworld.wolfram.com/TagSystem.html
- https://mathworld.wolfram.com/CyclicTagSystem.html
- https://www.wolframscience.com/nks/p95/ (cyclic tag systems)
- https://www.wolframscience.com/nks/p669/ (emulation of tag systems)
 |  |
