Engineering:List of ASTM International standards (D5001–6000)

From HandWiki
Revision as of 16:15, 7 February 2024 by John Stpola (talk | contribs) (correction)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: None

This is a list of ASTM international standards with ID in the range D5001–6000.

List

D5001–D5100

  • D5001 – 19e1 Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
  • D5002 – 19 Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • D5003 – 19 Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke
  • D5004 – 11(2017) Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
  • D5006 – 11(2016) Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
  • D5007 – 99(2017) Test Method for Wet-to-Dry Hiding Change
  • D5008 – 07(2012) Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
  • D5009 – 02(2017) Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
  • D5011 – 17 Practices for Calibration of Ozone Monitors Using Transfer Standards
  • D5012 – 20 Practice for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
  • D5013 – 18 Practices for Sampling Wastes from Pipes and Other Point Discharges
  • D5015 – 15 Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
  • D5016 – 16 Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
  • D5017 – 17 Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
  • D5018 – 18 Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
  • D5023 – 15 Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
  • D5024 – 15 Test Method for Plastics: Dynamic Mechanical Properties: In Compression
  • D5025 – 20a Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
  • D5026 – 15 Test Method for Plastics: Dynamic Mechanical Properties: In Tension
  • D5028 – 17 Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
  • D5029 – 98(2020) Test Method for Water Solubles in Activated Carbon
  • D5030/D5030M – 13a Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
  • D5031/D5031M – 13(2018) Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
  • D5032 – 19 Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
  • D5034 – 09(2017) Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
  • D5035 – 11(2019) Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
  • D5040 – 90(2016) Test Methods for Ash Content of Adhesives
  • D5041 – 98(2019) Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
  • D5044 – 06(2017) Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)
  • D5045 – 14 Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
  • D5047 – 17 Specification for Polyethylene Terephthalate Film and Sheeting
  • D5048 – 20a Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
  • D5050 – 08(2015) Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts
  • D5051 – 06(2017) Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay
  • D5052 – 18 Test Method for Permeability of Leather to Water Vapor
  • D5053 – 03(2015) Test Method for Colorfastness of Crocking of Leather
  • D5055 – 19e1 Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
  • D5056 – 17 Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
  • D5057 – 17 Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • D5058 – 12(2020) Practices for Compatibility of Screening Analysis of Waste
  • D5059 – 20 Test Methods for Lead and Manganese in Gasoline by X-Ray Spectroscopy
  • D5060 – 12 Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
  • D5061 – 19 Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke
  • D5062 – 09(2020) Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
  • D5063 – 90(2012) Guide for Use of Certification of Coating Conformance Form
  • D5064 – 16a Practice for Conducting a Patch Test to Assess Coating Compatibility
  • D5065 – 17 Guide for Assessing the Condition of Aged Coatings on Steel Surfaces
  • D5066 – 91(2017) Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis
  • D5067 – 16 Specification for Artists' Watercolor Paints
  • D5068 – 04(2019) Practice for Preparation of Paint Brushes for Evaluation
  • D5069/D5069M – 13(2019) Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings
  • D5070 – 90(2014) Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations
  • D5071 – 06(2013) Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
  • D5072 – 09(2016) Test Method for Radon in Drinking Water
  • D5073 – 02(2013) Practice for Depth Measurement of Surface Water
  • D5074 – 90(2019)e1 Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
  • D5075 – 01(2017)e1 Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
  • D5076/D5076M – 13(2019) Test Method for Measuring Voids in Roofing and Waterproofing Membranes
  • D5077 – 90(2015) Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
  • D5078/D5078M – 11(2016) Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
  • D5080 – 20 Test Method for Rapid Determination of Percent Compaction
  • D5081/D5081M – 90(2018) Test Method for Aggregate Layer Hiding Power
  • D5083 – 17 Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
  • D5084 – 16a Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • D5085 – 02(2013) Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
  • D5086 – 20 Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
  • D5087 – 02(2014) Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
  • D5088 – 20 Practice for Decontamination of Field Equipment Used at Waste Sites
  • D5089 – 95(2014) Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
  • D5090 – 20 Practice for Standardizing Ultrafiltration Permeate Flow Performance Data
  • D5091 – 95(2014) Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications
  • D5092/D5092M – 16 Practice for Design and Installation of Groundwater Monitoring Wells
  • D5093 – 15e1 Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
  • D5094/D5094M – 09(2014) Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
  • D5095 – 91(2013) Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
  • D5096 – 02(2017) Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer
  • D5098 – 16 Specification for Artists' Acrylic Dispersion Paints
  • D5099 – 08(2017) Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
  • D5100/D5100M – 95a(2018) Test Method for Adhesion of Mineral Aggregate to Hot Bitumen

D5101–D5200

  • D5101 – 12(2017) Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems
  • D5103 – 07(2018) Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test)
  • D5105 – 05(2019) Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
  • D5106 – 15 Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
  • D5107 – 03(2013) Practice for Preparatory Surface Cleaning of Architectural Sandstone
  • D5110 – 98(2017) Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • D5111 – 12(2020) Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations
  • D5112 – 98(2015) Test Method for Vibration (Horizontal Linear Motion) Test of Products
  • D5113 – 97(2016) Test Method for Determining Adhesive Attack on Rigid Cellular Foam
  • D5114/D5114M – 90(2018)e1 Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
  • D5116 – 17 Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
  • D5117 – 17 Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
  • D5118/D5118M – 15(2020) Practice for Fabrication of Fiberboard Shipping Boxes
  • D5121 – 15 Practice for Preparation of Rock Slabs for Durability Testing
  • D5124 – 96(2018) Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation
  • D5125 – 10(2020)e1 Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
  • D5126 – 16e1 Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
  • D5127 – 13(2018) Guide for Ultra-Pure Water Used in the Electronics and Semiconductor Industries
  • D5128 – 14 Test Method for On-Line pH Measurement of Water of Low Conductivity
  • D5129 – 95(2014)e1 Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions
  • D5130 – 95(2014) Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
  • D5131 – 90(2014) Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems
  • D5132 – 20 Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
  • D5133 – 20a Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • D5134 – 13(2017) Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
  • D5135 – 16e1 Test Method for Analysis of Styrene by Capillary Gas Chromatography
  • D5136 – 19 Specification for High Purity p-Xylene
  • D5137 – 07(2013) Specification for Hexyl Acetate
  • D5138 – 16 Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
  • D5139 – 19 Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
  • D5141 – 11(2018) Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device
  • D5143 – 06(2015)e1 Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography
  • D5144 – 08(2016) Guide for Use of Protective Coating Standards in Nuclear Power Plants
  • D5145 – 09(2014) Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths
  • D5146 – 10(2019) Guide to Testing Solvent-Borne Architectural Coatings
  • D5147/D5147M – 18 Test Methods for Sampling and Testing Modified Bituminous Sheet Material
  • D5149 – 02(2016) Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
  • D5150 – 92(2017) Test Method for Hiding Power of Architectural Paints Applied by Roller
  • D5151 – 19 Test Method for Detection of Holes in Medical Gloves
  • D5153 – 10(2016) Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
  • D5154/D5154M – 18 Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
  • D5155 – 19 Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates
  • D5156 – 02(2016) Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
  • D5157 – 19 Guide for Statistical Evaluation of Indoor Air Quality Models
  • D5158 – 98(2019) Test Method for Determination of Particle Size of Powdered Activated Carbon by Air-Jet Sieving
  • D5159 – 04(2020) Guide for Dusting Attrition of Granular Activated Carbon
  • D5160 – 95(2019) Guide for Gas-Phase Adsorption Testing of Activated Carbon
  • D5162 – 15 Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
  • D5163 – 16 Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants
  • D5164 – 05(2019) Specification for Propylene Glycol and Dipropylene Glycol
  • D5165 – 12(2020) Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
  • D5166 – 97(2016) Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
  • D5167 – 13(2018) Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
  • D5168 – 12(2017) Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
  • D5169 – 98(2015) Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
  • D5170 – 98(2015) Test Method for Peel Strength (“T” Method) of Hook and Loop Touch Fasteners
  • D5171 – 15(2020) Test Method for Impact Resistance of Plastic Sew-Through Buttons
  • D5172 – 91(2015) Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water
  • D5173 – 15 Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
  • D5174 – 07(2013) Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry
  • D5175 – 91(2017)e1 Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
  • D5176 – 20 Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • D5178 – 16 Test Method for Mar Resistance of Organic Coatings
  • D5179 – 16 Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
  • D5181 – 09(2017) Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
  • D5182 – 19 Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
  • D5183 – 05(2016) Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
  • D5184 – 12(2017) Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometrye espectrometria de absorção atômicaespectrometría por absorción atómica
  • D5185 – 18 Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)inductivamente (ICP-AES)(ICP-AES)1
  • D5186 – 20 Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography
  • D5187 – 21 Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction
  • D5188 – 16 Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)
  • D5191 – 20 Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
  • D5192 – 09(2015) Practice for Collection of Coal Samples from Core
  • D5193/D5193M – 93(2017) Test Method for Coated Fabrics—Air Retention
  • D5194 – 18 Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
  • D5195 – 14 Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
  • D5196 – 06(2018) Guide for Bio-Applications Grade Water
  • D5197 – 16 Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)
  • D5198 – 17 Practice for Nitric Acid Digestion of Solid Waste
  • D5199 – 12(2019) Test Method for Measuring the Nominal Thickness of Geosynthetics
  • D5200 – 03(2014) Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans

D5201–D5300

  • D5201 – 05a(2020) Practice for Calculating Formulation Physical Constants of Paints and Coatings
  • D5202/D5202M – 16 Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils
  • D5204 – 19 Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials
  • D5205 – 16 Classification System and Basis for Specification for Polyetherimide (PEI) Materials
  • D5206 – 19 Test Method for Windload Resistance of Rigid Plastic Siding
  • D5207 – 20 Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials
  • D5208 – 14 Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
  • D5211 – 19 Specification for Xylenes for p-Xylene Feedstock
  • D5213 – 19 Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications
  • D5215 – 93(2012) Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
  • D5217 – 17 Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
  • D5219 – 15 Terminology Relating to Body Dimensions for Apparel Sizing
  • D5220 – 14 Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
  • D5222 – 16 Specification for High Fire-Point Mineral Electrical Insulating Oils
  • D5224 – 12(2019) Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
  • D5225 – 17 Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • D5226 – 16 Practice for Dissolving Polymer Materials
  • D5227 – 13 Test Method for Measurement of Hexane Extractable Content of Polyolefins
  • D5228 – 16 Test Method for Determination of Butane Working Capacity of Activated Carbon
  • D5229/D5229M – 20 Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
  • D5230 – 19 Test Method for Carbon Black—Automated Individual Pellet Hardness
  • D5231 – 92(2016) Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
  • D5232 – 19 Practice for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
  • D5233 – 92(2017) Test Method for Single Batch Extraction Method for Wastes
  • D5234 – 92(2017) Guide for Analysis of Ethylene Product
  • D5235 – 18 Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
  • D5236 – 18a Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
  • D5237 – 14(2019) Guide for Evaluating Fabric Softeners
  • D5239 – 12e1 Practice for Characterizing Fly Ash for Use in Soil Stabilization
  • D5240/D5240M – 20 Test Method for Evaluation of the Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate
  • D5241 – 92(2017) Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water
  • D5242 – 92(2013) Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs
  • D5243 – 92(2019) Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
  • D5245 – 19 Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
  • D5246 – 19 Test Method for Isolation and Enumeration of Pseudomonas aeruginosa from Water
  • D5248 – 04(2020) Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
  • D5249 – 10(2016) Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
  • D5250 – 19 Specification for Poly(vinyl chloride) Gloves for Medical Application
  • D5252 – 20 Practice for the Operation of the Hexapod Tumble Drum Tester
  • D5253 – 04(2016) Terminology Relating to Floor Coverings and Textile Upholstered Furniture
  • D5255 – 15 Practice for Certification of Personnel Engaged in the Testing of Soil and Rock
  • D5256 – 14 Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
  • D5257 – 17 Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
  • D5258 – 02(2013) Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
  • D5259 – 19 Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
  • D5260 – 16 Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • D5261 – 10(2018) Test Method for Measuring Mass per Unit Area of Geotextiles
  • D5262 – 07(2016) Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics
  • D5263 – 15 Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
  • D5264 – 98(2019) Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
  • D5265 – 09(2016) Test Method for Bridge Impact Testing
  • D5266 – 13(2020) Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints
  • D5267 – 97(2017) Test Method for Determination of Extrudability of Cartridge Adhesives
  • D5268 – 19e1 Specification for Topsoil Used for Landscaping and Construction Purposes
  • D5269 – 15 Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
  • D5270/D5270M – 20 Practice for (Analytical Procedures) Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
  • D5272 – 08(2013) Practice for Outdoor Exposure Testing of Photodegradable Plastics
  • D5273 – 18 Guide for Analysis of Propylene Concentrates
  • D5274 – 00(2019) Guide for Analysis of 1,3–Butadiene Product
  • D5275 – 20 Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids
  • D5276 – 19 Test Method for Drop Test of Loaded Containers by Free Fall
  • D5277 – 92(2015) Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
  • D5278/D5278M – 09(2017) Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
  • D5279 – 13 Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
  • D5280 – 96(2013) Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
  • D5282 – 05(2020) Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation
  • D5283 – 18 Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
  • D5284 – 09(2017) Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid
  • D5286 – 20 Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
  • D5287 – 08(2015) Practice for Automatic Sampling of Gaseous Fuels
  • D5288 – 14 Test Method for Determining Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
  • D5289 – 19a Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
  • D5291 – 16 Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • D5293 – 20 Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between −10 °C and −35 °C Using Cold-Cranking Simulator
  • D5295/D5295M – 18 Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
  • D5296 – 19 Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
  • D5297 – 95(2019) Test Methods for Rubber Chemical Accelerator—Purity by High Performance Liquid Chromatography
  • D5298 – 16 Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
  • D5299/D5299M – 18 Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities

D5301–D5400

  • D5301 – 92(2016) Practice for Physical Characterization of Paint Brushes
  • D5303 – 20 Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography
  • D5304 – 20 Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
  • D5305 – 18e1 Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor
  • D5306 – 92(2018) Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
  • D5309 – 17 Specification for Cyclohexane 999
  • D5310 – 10(2018) Test Method for Tar Acid Composition by Capillary Gas Chromatography
  • D5311/D5311M – 13 Test Method for Load Controlled Cyclic Triaxial Strength of Soil
  • D5312/D5312M – 12(2013) Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
  • D5313/D5313M – 12(2013) Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions
  • D5315 – 04(2017)e1 Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization
  • D5316 – 98(2017) Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
  • D5317 – 20 Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
  • D5319 – 17 Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
  • D5321/D5321M – 20 Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
  • D5322 – 17 Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
  • D5323 – 19a Practice for Determination of 2% Secant Modulus for Polyethylene Geomembranes
  • D5324 – 16 Guide for Testing Water-Borne Architectural Coatings
  • D5325 – 03(2014) Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints
  • D5326 – 94a(2013) Test Method for Color Development in Tinted Latex Paints
  • D5327 – 97(2013) Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
  • D5329 – 20 Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements
  • D5330/D5330M – 06(2020) Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
  • D5331 – 03(2016) Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
  • D5334 – 14 Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
  • D5335 – 14 Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
  • D5336 – 15a Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material
  • D5337 – 11(2016) Practice for Flow Rate Adjustment of Personal Sampling Pumps
  • D5338 – 15(2021) Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures
  • D5340 – 20 Test Method for Airport Pavement Condition Index Surveys
  • D5341/D5341M – 19 Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)
  • D5343 – 06(2018) Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners
  • D5344 – 99(2017) Test Method for Extension Force of Partially Oriented Yarn
  • D5346 – 17 Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
  • D5347 – 19a Test Method for Determination of the Ash Content of Fats and Oils
  • D5348 – 95(2019) Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene
  • D5349 – 19 Test Method for Determination of the Moisture and Volatile Content of Sulfonated, Sulfated Oils and Fatliquors by Oven Method
  • D5350 – 95(2019) Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
  • D5351 – 93(2017) Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B
  • D5352 – 95(2019) Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
  • D5353 – 95(2019) Test Method for Determination of Total Desulfated Fatty Matter
  • D5354 – 95(2020) Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
  • D5355 – 95(2017) Test Method for Specific Gravity of Oils and Liquid Fats
  • D5356 – 17a Test Method for pH of Chrome Tanning Solutions
  • D5357 – 19 Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
  • D5358 – 93(2019) Practice for Sampling With a Dipper or Pond Sampler
  • D5359 – 98(2015) Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber
  • D5360 – 15 Practice for Design and Construction of Bituminous Surface Treatments
  • D5361/D5361M – 16 Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
  • D5362 – 13(2018) Test Method for Snagging Resistance of Fabrics (Bean Bag)
  • D5363 – 16 Specification for Anaerobic Single-Component Adhesives (AN)
  • D5364 – 14(2019) Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units
  • D5365 – 18 Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • D5366 – 96(2017) Test Method for Determining the Dynamic Performance of a Wind Vane
  • D5367 – 16 Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted
  • D5372 – 20 Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
  • D5373 – 16 Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke
  • D5374 – 13 Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
  • D5375/D5375M – 98(2019) Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
  • D5376 – 06(2017) Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ
  • D5377 – 93(2017) Classification for Rubber Compounding Materials—Ground Coal
  • D5378 – 12(2019) Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use
  • D5379/D5379M – 19 Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
  • D5380 – 93(2014) Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
  • D5381 – 93(2014) Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
  • D5382 – 02(2017) Guide to Evaluation of Optical Properties of Powder Coatings
  • D5383 – 16 Practice for Visual Determination of the Lightfastness of Art Materials by Artists and Art Technologists
  • D5384 – 14(2019) Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
  • D5385/D5385M – 20 Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
  • D5386 – 16 Test Method for Color of Liquids Using Tristimulus Colorimetry
  • D5387 – 93(2019) Guide for Elements of a Complete Data Set for Non-Cohesive Sediments
  • D5388 – 93(2013) Test Method for Indirect Measurements of Discharge by Step-Backwater Method
  • D5389 – 93(2019) Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
  • D5390 – 93(2013) Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes
  • D5391 – 14 Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
  • D5392 – 19 Test Method for Isolation and Enumeration of Escherichia coli in Water by the Two-Step Membrane Filter Procedure
  • D5395 – 03(2018) Specification for Reclaimed Methylene Chloride
  • D5396 – 04(2020) Specification for Reclaimed Perchloroethylene
  • D5397 – 20 Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
  • D5399 – 09(2017) Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
  • D5400 – 15 Test Methods for Hydroxypropylcellulose

D5401–D5500

  • D5401 – 03(2014) Test Method for Evaluating Clear Water Repellent Coatings on Wood
  • D5402 – 19 Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
  • D5403 – 93(2013) Test Methods for Volatile Content of Radiation Curable Materials
  • D5404/D5404M – 12(2017) Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
  • D5405/D5405M – 98(2015) Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
  • D5406 – 93(2016) Practice for Rubber—Calculation of Producer's Process Performance Indexes
  • D5411 – 10(2015) Practice for Calculation of Average Energy Per Disintegration (¯E) for a Mixture of Radionuclides in Reactor Coolant
  • D5412 – 93(2017)e1 Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
  • D5413 – 93(2013) Test Methods for Measurement of Water Levels in Open-Water Bodies
  • D5414 – 95(2020) Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
  • D5415 – 95(2020) Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
  • D5416 – 95(2020) Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
  • D5417 – 16 Practice for Operation of the Vettermann Drum Tester
  • D5418 – 15 Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
  • D5419 – 14a Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
  • D5420 – 16 Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
  • D5421 – 15 Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
  • D5422 – 17 Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
  • D5423 – 14 Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
  • D5424 – 18 Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
  • D5425 – 18 Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products
  • D5426 – 19 Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints
  • D5427 – 09(2019) Practice for Accelerated Aging of Inflatable Restraint Fabrics
  • D5428 – 08(2019) Practice for Evaluating the Performance of Inflatable Restraint Modules
  • D5430 – 13(2017) Test Methods for Visually Inspecting and Grading Fabrics
  • D5431 – 08(2019) Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use
  • D5432 – 12(2019) Performance Specification for Blanket Products for Institutional and Household Use
  • D5433 – 12(2019) Performance Specification for Towel Products for Institutional and Household Use
  • D5434 – 12 Guide for Field Logging of Subsurface Explorations of Soil and Rock
  • D5436 – 15(2020) Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
  • D5438 – 17 Practice for Collection of Floor Dust for Chemical Analysis
  • D5439 – 95(2019) Test Method for Determination of Sediment in Moellon
  • D5440 – 17 Test Method for Determining the Melting Point of Fats and Oils
  • D5441 – 98(2017) Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
  • D5442 – 17 Test Method for Analysis of Petroleum Waxes by Gas Chromatography
  • D5443 – 14(2018) Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography
  • D5444 – 15 Test Method for Mechanical Size Analysis of Extracted Aggregate
  • D5445 – 15 Practice for Pictorial Markings for Handling of Goods
  • D5446 – 08(2019) Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints
  • D5447 – 17 Guide for Application of a Numerical Groundwater Flow Model to a Site-Specific Problem
  • D5448/D5448M – 16 Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
  • D5449/D5449M – 16 Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
  • D5450/D5450M – 16 Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
  • D5451 – 93(2016) Practice for Sampling Using a Trier Sampler
  • D5452 – 20 Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
  • D5453 – 19a Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
  • D5454 – 11(2020) Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers*D5456 – 19 Specification for Evaluation of Structural Composite Lumber Products
  • D5457 – 20 Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
  • D5458 – 95(2020) Test Method for Peel Cling of Stretch Wrap Film
  • D5459 – 95(2020) Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
  • D5460 – 02(2017) Test Method for Rubber Compounding Materials—Water in Rubber Additives
  • D5461 – 06(2017) Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials
  • D5462 – 13 Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
  • D5463 – 18 Guide for Use of Test Kits to Measure Inorganic Constituents in Water
  • D5464 – 16 Test Method for pH Measurement of Water of Low Conductivity
  • D5465 – 16(2020) Practices for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
  • D5466 – 15 Test Method for Determination of Volatile Organic Compounds in Atmospheres (Canister Sampling Methodology)
  • D5467/D5467M – 97(2017) Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
  • D5469/D5469M – 12 Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems
  • D5470 – 17 Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
  • D5471 – 18 Specification for O-Xylene 980
  • D5472/D5472M – 20 Practice for Determining Specific Capacity and Estimating Transmissivity at the Control Well
  • D5473/D5473M – 20 Practice for (Analytical Procedures) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer
  • D5474 – 93(2012) Guide for Selection of Data Elements for Groundwater Investigations
  • D5477 – 18 Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • D5478 – 13(2018) Test Methods for Viscosity of Materials by a Falling Needle Viscometer
  • D5479 – 94(2020) Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed
  • D5481 – 21 Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
  • D5482 – 20a Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric)
  • D5483 – 20 Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
  • D5485 – 16 Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
  • D5486/D5486M – 06(2020) Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
  • D5487 – 16 Test Method for Simulated Drop of Loaded Containers by Shock Machines
  • D5489 – 18 Guide for Care Symbols for Care Instructions on Textile Products
  • D5490 – 93(2014)e1 Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information
  • D5491 – 08(2014) Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
  • D5492 – 17 Test Method for Determination of Xylene Solubles in Propylene Plastics
  • D5493 – 06(2016) Test Method for Permittivity of Geotextiles Under Load
  • D5494 – 93(2018) Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
  • D5495 – 03(2016) Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
  • D5496 – 15(2020) Practice for In-Field Immersion Testing of Geosynthetics
  • D5498 – 12a(2018) Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
  • D5499 – 94(2013) Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems
  • D5500 – 20a Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

D5501–D5600

  • D5501 – 20 Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
  • D5502 – 00(2015) Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
  • D5504 – 20 Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
  • D5505 – 14(2020) Practice for Classifying Emulsified Recycling Agents
  • D5507 – 99(2012) Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
  • D5508 – 16 Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
  • D5511 – 18 Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
  • D5513 – 15 Practice for Microwave Digestion of Industrial Furnace Feed Streams and Waste for Trace Element Analysis
  • D5514/D5514M – 18 Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics
  • D5515 – 20 Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer
  • D5516 – 18 Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
  • D5517 – 14 Test Method for Determining Extractability of Metals from Art Materials
  • D5519 – 15 Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
  • D5520 – 18 Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
  • D5521/D5521M – 18 Guide for Development of Groundwater Monitoring Wells in Granular Aquifers
  • D5523 – 15 Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates
  • D5526 – 18 Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
  • D5527 – 00(2017)e1 Practices for Measuring Surface Wind and Temperature by Acoustic Means
  • D5528 – 13 Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
  • D5530 – 15 Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
  • D5531 – 17 Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
  • D5534 – 94(2018) Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
  • D5536 – 17 Practice for Sampling Forest Trees for Determination of Clear Wood Properties
  • D5537 – 18 Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
  • D5538 – 13(2018) Practice for Thermoplastic Elastomers—Terminology and Abbreviations
  • D5540 – 13 Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
  • D5541 – 94(2014) Practice for Developing a Stage-Discharge Relation for Open Channel Flow
  • D5542 – 16 Test Methods for Trace Anions in High Purity Water by Ion Chromatography
  • D5543 – 15 Test Method for Low-Level Dissolved Oxygen in Water
  • D5544 – 16 Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water
  • D5547 – 95(2017) Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
  • D5548 – 13(2020) Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings)
  • D5549 – 19 Guide for Contents of Geostatistical Site Investigation Report
  • D5550 – 14 Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
  • D5551 – 95(2019) Test Method for Determination of the Cloud Point of Oil
  • D5552 – 10(2015) Test Method for Resistance of Colored Leather to Bleeding
  • D5553 – 95(2019) Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
  • D5554 – 15 Test Method for Determination of the Iodine Value of Fats and Oils
  • D5555 – 95(2017) Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds
  • D5556 – 19 Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fatliquors and Softening Compounds
  • D5557 – 95(2017) Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
  • D5558 – 95(2017) Test Method for Determination of the Saponification Value of Fats and Oils
  • D5559 – 95(2017) Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence of Ammonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils
  • D5560 – 95(2018) Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils
  • D5562 – 95(2018) Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps
  • D5564 – 95(2018) Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils
  • D5567 – 94(2018) Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
  • D5568 – 14 Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
  • D5570/D5570M – 10(2015) Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
  • D5571 – 16 Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
  • D5572 – 95(2019) Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
  • D5573 – 99(2019) Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
  • D5574 – 94(2012) Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints
  • D5575 – 18 Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
  • D5576 – 00(2013) Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
  • D5577 – 19 Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
  • D5578 – 04(2015) Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
  • D5579 – 19 Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
  • D5580 – 15(2020) Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
  • D5581 – 07a(2013) Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
  • D5582 – 14 Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator
  • D5587 – 15(2019) Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
  • D5588 – 97(2017) Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
  • D5589 – 19 Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement
  • D5590 – 17 Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
  • D5591 – 04(2016) Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
  • D5592 – 94(2018) Guide for Material Properties Needed in Engineering Design Using Plastics
  • D5594 – 18a Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
  • D5596 – 03(2016) Test Method For Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
  • D5598 – 20 Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
  • D5599 – 18 Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • D5599 – 18 Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • D5600 – 17 Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D5601–D5700

  • D5602/D5602M – 18 Test Method for Static Puncture Resistance of Roofing Membrane Specimens
  • D5603 – 19a Classification for Rubber Compounding Materials—Recycled Vulcanizate Rubber
  • D5604 – 96(2017) Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption
  • D5605 – 94(2016) Practice for Styrene-Butadiene Rubber (SBR)—Establishing Raw Mooney Viscosity Target Values
  • D5606 – 19 Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock
  • D5607 – 16 Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
  • D5608 – 16 Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites
  • D5609 – 16 Guide for Defining Boundary Conditions in Groundwater Flow Modeling
  • D5610 – 94(2014) Guide for Defining Initial Conditions in Groundwater Flow Modeling
  • D5611 – 94(2016) Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application
  • D5612 – 94(2018) Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
  • D5613 – 94(2014) Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers
  • D5614 – 94(2014) Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs
  • D5615 – 20 Test Method for Operating Characteristics of Home Reverse Osmosis Devices
  • D5616 – 04(2016) Specification for Reclaimed Trichloroethylene
  • D5617 – 04(2015) Test Method for Multi-Axial Tension Test for Geosynthetics
  • D5618 – 20 Test Method for Measurement of Barnacle Adhesion Strength in Shear
  • D5621 – 20 Test Method for Sonic Shear Stability of Hydraulic Fluids
  • D5622 – 17 Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
  • D5623 – 19 Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
  • D5624 – 13 Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications
  • D5627 – 17 Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
  • D5628 – 18 Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
  • D5629 – 16 Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
  • D5630 – 13 Test Method for Ash Content in Plastics
  • D5631 – 15 Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane (CF3Br)
  • D5632/D5632M – 17 Specification for Halon 1301, Bromotrifluoromethane (CF3Br)
  • D5633 – 04(2016) Practice for Sampling with a Scoop
  • D5635/D5635M – 18 Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
  • D5636/D5636M – 94(2017) Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials
  • D5637 – 05(2017) Test Method for Moisture Resistance of Electrical Insulating Varnishes
  • D5638 – 18 Test Method for Chemical Resistance of Electrical Insulating Varnishes
  • D5639/D5639M – 20 Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
  • D5640 – 95(2014) Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water
  • D5641/D5641M – 16 Practice for Geomembrane Seam Evaluation by Vacuum Chamber
  • D5642 – 16 Test Method for Sealed Tube Chemical Compatibility Test
  • D5643/D5643M – 06(2018) Specification for Coal Tar Roof Cement, Asbestos Free
  • D5644 – 18 Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
  • D5646 – 13(2018) Terminology Relating to Seams and Stitches Used in Home Sewing
  • D5647 – 07(2018) Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus
  • D5648 – 01(2019) Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
  • D5649 – 15 Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
  • D5651 – 13 Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
  • D5652 – 15 Test Methods for Single-Bolt Connections in Wood and Wood-Based Products
  • D5656 – 10(2017) Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
  • D5657 – 07(2014) Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
  • D5658 – 20 Practice for Sampling Unconsolidated Waste from Trucks
  • D5662 – 19a Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
  • D5663 – 15(2020) Guide for Validating Recycled Content in Packaging Paper and Paperboard
  • D5664 – 17 Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
  • D5665/D5665M – 99a(2014)e1 Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing
  • D5666 – 95(2019) Test Method for Rubber Chemical Antidegradants—Purity of p-Phenylenediamine (PPD) Antidegradants by High Performance Liquid Chromatography
  • D5667 – 95(2019) Test Method for Rubber From Synthetic Sources—Total and Water Soluble Ash
  • D5668 – 19 Test Methods for Rubber From Synthetic Sources—Volatile Matter
  • D5670 – 95(2019) Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • D5671 – 20 Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
  • D5672/D5672M – 15 Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique
  • D5673 – 16 Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
  • D5674 – 95(2014) Guide for Operation of a Gaging Station
  • D5675 – 13(2018) Classification for Low Molecular Weight PTFE and FEP Micronized Powders
  • D5677 – 17 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
  • D5678 – 17 Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish
  • D5679 – 16 Practice for Sampling Consolidated Solids in Drums or Similar Containers
  • D5680 – 14 Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
  • D5681 – 20 Terminology for Waste and Waste Management
  • D5682 – 18 Test Methods for Electrical Resistivity of Liquid Paint and Related Materials
  • D5683/D5683M – 95(2017) Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
  • D5684 – 19a Terminology Relating to Pile Floor Coverings
  • D5685 – 19 Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
  • D5687/D5687M – 20 Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation

D5701–D5800

  • D5702 – 18 Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
  • D5703 – 95(2013) Practice for Preparatory Surface Cleaning for Clay Brick Masonry
  • D5704 – 20 Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
  • D5705 – 20 Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
  • D5706 – 16 Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D5707 – 19 Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D5708 – 15(2020)e1 Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
  • D5709 – 09(2015) Test Method for Sieve Analysis of Petroleum Coke
  • D5710/D5710M – 15 Specification for Trinidad Lake Modified Asphalt
  • D5712 – 15(2020) Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method
  • D5713 – 14(2018)e1 Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
  • D5715 – 14 Practice for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)
  • D5716/D5716M – 20 Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
  • D5718 – 13 Guide for Documenting a Groundwater Flow Model Application
  • D5719 – 13 Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes
  • D5721 – 08(2018) Practice for Air-Oven Aging of Polyolefin Geomembranes
  • D5722 – 20 Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure
  • D5723 – 95(2019) Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
  • D5724 – 16 Specification for Gouache Paints
  • D5726 – 98(2020) Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing
  • D5727/D5727M – 00(2017) Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)
  • D5728 – 12(2020) Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
  • D5731 – 16 Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
  • D5737/D5737M – 19 Guide for Methods for Measuring Well Discharge
  • D5739 – 06(2020) Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
  • D5740 – 18 Guide for Writing Material Standards in the Classification Format
  • D5741 – 96(2017) Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer
  • D5742 – 16 Test Method for Determination of Butane Activity of Activated Carbon
  • D5743 – 97(2013) Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers
  • D5744 – 18 Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
  • D5745 – 15 Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation
  • D5746 – 98(2016) Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities
  • D5747/D5747M – 20 Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
  • D5748 – 95(2019) Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
  • D5749 – 17 Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
  • D5750/D5750M – 95(2020) Guide for Width and Length of Pressure-Sensitive Tape
  • D5751 – 99(2019) Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
  • D5752 – 10(2017) Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
  • D5753 – 18 Guide for Planning and Conducting Geotechnical Borehole Geophysical Logging
  • D5755 – 09(2014)e1 Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
  • D5757 – 11(2017) Test Method for Determination of Attrition of FCC Catalysts by Air Jets
  • D5758 – 01(2015) Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
  • D5759 – 12(2020) Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
  • D5760 – 19 Specification for Performance of Manual Transmission Gear Lubricants
  • D5761 – 96(2017) Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials
  • D5762 – 18a Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
  • D5763 – 11(2016) Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware
  • D5764 – 97a(2018) Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products
  • D5765 – 16 Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating
  • D5766/D5766M – 11(2018) Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
  • D5767 – 18 Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
  • D5768 – 02(2018) Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
  • D5769 – 20 Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
  • D5770 – 11(2017) Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
  • D5771 – 20 Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
  • D5772 – 20 Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
  • D5773 – 20 Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
  • D5774 – 95(2019) Test Methods for Rubber—Chemical Analysis of Extractables
  • D5775 – 95(2019) Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index
  • D5776 – 14a Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
  • D5777 – 18 Guide for Using the Seismic Refraction Method for Subsurface Investigation
  • D5778 – 20 Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
  • D5779/D5779M – 14 Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control
  • D5780 – 18 Test Methods for Individual Piles in Permafrost Under Static Axial Compressive Load
  • D5781/D5781M – 18 Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices
  • D5782 – 18 Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
  • D5783 – 18 Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
  • D5784/D5784M – 18 Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices
  • D5785/D5785M – 20 Practice for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
  • D5786 – 17 Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems
  • D5787 – 20 Practice for Monitoring Well Protection At or Near Land Surface
  • D5788 – 95(2017) Guide for Spiking Organics into Aqueous Samples
  • D5790 – 18 Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
  • D5791 – 95(2017) Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
  • D5792 – 10(2015) Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
  • D5793 – 18 Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings
  • D5794 – 95(2014) Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
  • D5795 – 16 Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus
  • D5796 – 20 Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device
  • D5797 – 18 Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines
  • D5798 – 20 Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
  • D5799 – 19 Test Method for Determination of Peroxides in Butadiene
  • D5800 – 20 Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

D5801–D5900

  • D5801 – 17 Test Method for Toughness and Tenacity of Asphalt Materials
  • D5805 – 00(2019) Test Methods for Rubber—Determination of Carbon Black in Masterbatches
  • D5806 – 95(2017) Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration
  • D5807 – 18 Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions
  • D5808 – 20 Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
  • D5810 – 96(2015) Guide for Spiking into Aqueous Samples 
  • D5811 – 20 Test Method for Strontium-90 in Water
  • D5813 – 04(2018) Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
  • D5814 – 18 Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
  • D5817 – 20 Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing
  • D5818 – 11(2018) Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics
  • D5819 – 18 Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
  • D5820 – 95(2018) Practice for Pressurized Air Channel Evaluation of Dual-Seamed Geomembranes
  • D5821 – 13(2017) Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
  • D5822 – 13(2019) Test Method for Determining Seam Strength in Inflatable Restraint Cushions
  • D5823 – 19 Test Method for Tuft Height of Pile Floor Coverings
  • D5824 – 98(2017) Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
  • D5827 – 09(2015) Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
  • D5828 – 97(2018) Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
  • D5830 – 14 Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
  • D5831 – 17 Practice for Screening Fuels in Soils
  • D5832 – 98(2014) Test Method for Volatile Matter Content of Activated Carbon Samples
  • D5833 – 12(2020) Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans
  • D5835 – 20 Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
  • D5836 – 20 Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1–2 PP Method)
  • D5837 – 15 Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)
  • D5839 – 15 Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
  • D5842 – 19 Practice for Sampling and Handling of Fuels for Volatility Measurement
  • D5843/D5843M – 95(2014)e1 Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing
  • D5845 – 01(2016) Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • D5846 – 07(2017) Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
  • D5847 – 02(2020) Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
  • D5848 – 20 Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
  • D5849/D5849M – 21 Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)
  • D5850 – 20 Practice for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
  • D5851 – 95(2015) Guide for Planning and Implementing a Water Monitoring Program
  • D5853 – 17a Test Method for Pour Point of Crude Oils
  • D5854 – 19a Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
  • D5855/D5855M – 20 Practice for (Analytical Procedure) Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
  • D5856 – 15 Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • D5857 – 17 Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
  • D5858 – 96(2020) Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
  • D5860 – 95(2013) Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
  • D5861 – 07(2017) Guide for Significance of Particle Size Measurements of Coating Powders
  • D5863 – 00a(2016) Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
  • D5864 – 18 Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
  • D5865/D5865M – 19 Test Method for Gross Calorific Value of Coal and Coke
  • D5866 – 12(2020) Test Method for Neps in Cotton Fibers
  • D5867 – 12(2020) Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
  • D5868 – 01(2014) Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
  • D5869/D5869M – 07A(2018)e1 Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
  • D5870 – 16 Practice for Calculating Property Retention Index of Plastics
  • D5871 – 19 Specification for Benzene for Cyclohexane Feedstock
  • D5872/D5872M – 18 Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices
  • D5873 – 14 Test Method for Determination of Rock Hardness by Rebound Hammer Method
  • D5874 – 16 Test Methods for Determination of the Impact Value (IV) of a Soil
  • D5875/D5875M – 18 Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices
  • D5876/D5876M – 17 Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
  • D5878 – 19 Guides for Using Rock-Mass Classification Systems for Engineering Purposes
  • D5879/D5879M – 18 Practice for Surface Site Characterization for On-Site Septic Systems
  • D5881 – 20 Practice for (Analytical Procedures) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
  • D5882 – 16 Test Method for Low Strain Impact Integrity Testing of Deep Foundations
  • D5883 – 18 Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
  • D5884/D5884M – 04A(2015)e1 Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
  • D5885/D5885M – 20 Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
  • D5886 – 95(2018) Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
  • D5887/D5887M – 20 Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
  • D5888 – 19 Guide for Storage and Handling of Geosynthetic Clay Liners
  • D5889/D5889M – 18 Practice for Quality Control of Geosynthetic Clay Liners
  • D5890 – 19 Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
  • D5891/D5891M – 19 Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners
  • D5893/D5893M – 16 Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
  • D5894 – 16 Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
  • D5895 – 20 Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
  • D5896 – 96(2019)e1 Test Method for Carbohydrate Distribution of Cellulosic Materials
  • D5897 – 13 Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration—Alternative Method
  • D5898/D5898M – 96(2013) Guide for Standard Details for Adhered Sheet Waterproofing
  • D5899 – 98(2019) Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems
  • D5900 – 20 Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)

D5901–D6000

  • D5902 – 05(2019) Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • D5903 – 96(2017)e1 Guide for Planning and Preparing for a Groundwater Sampling Event
  • D5904 – 02(2017) Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • D5905 – 98(2018) Practice for the Preparation of Substitute Wastewater
  • D5906 – 02(2013) Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths
  • D5907 – 18 Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
  • D5909 – 20 Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance
  • D5910 – 05(2019) Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
  • D5912 – 20 Practice for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
  • D5913 – 96(2019) Test Method for Evaluation of Cleanability of Paint Brushes
  • D5917 – 15(2019) Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
  • D5918 – 13e1 Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils
  • D5919 – 96(2017) Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
  • D5920/D5920M – 20 Practice for (Analytical Procedure) Tests of Anisotropic Unconfined Aquifers by Neuman Method
  • D5922 – 18 Guide for Analysis, Interpretation, and Modeling of Spatial Variation in Geostatistical Site Investigations
  • D5923 – 18 Guide for Selection of Kriging Methods in Geostatistical Site Investigations
  • D5924 – 18 Guide for Selection of Simulation Approaches in Geostatistical Site Investigations
  • D5926 – 15(2020) Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
  • D5927 – 17 Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
  • D5928 – 18a Practice for Screening of Waste for Radioactivity
  • D5929 – 18 Test Method for Determining Biodegradability of Materials Exposed to Source-Separated Organic Municipal Solid Waste Mesophilic Composting Conditions by Respirometry
  • D5930 – 17 Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
  • D5931 – 20 Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
  • D5932 – 20 Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
  • D5933 – 19 Specification for 258-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions
  • D5946 – 17 Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
  • D5947 – 18 Test Methods for Physical Dimensions of Solid Plastics Specimens
  • D5948 – 05(2020) Specification for Molding Compounds, Thermosetting
  • D5949 – 16 Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
  • D5950 – 14(2020) Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
  • D5952 – 08(2015) Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever)
  • D5953M – 16 Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection
  • D5954 – 98(2014)e1 Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
  • D5955 – 02(2017)e1 Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
  • D5956 – 15 Guide for Sampling Strategies for Heterogeneous Wastes
  • D5957 – 98(2013) Guide for Flood Testing Horizontal Waterproofing Installations
  • D5958 – 99(2020) Practices for Preparation of Oil-Based Ink Resin Solutions
  • D5959 – 12(2017) Test Method for Bulk Density of Level Paintbrush Filaments
  • D5960 – 03(2018) Specification for Technical Grade Ethylene Dichloride
  • D5961/D5961M – 17 Test Method for Bearing Response of Polymer Matrix Composite Laminates
  • D5963 – 04(2019) Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
  • D5964 – 16 Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil
  • D5965 – 19 Test Methods for Density of Coating Powders
  • D5966 – 13 Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
  • D5967 – 19 Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
  • D5968 – 19a Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C
  • D5969 – 11(2016) Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
  • D5970/D5970M – 16 Test Method for Deterioration of Geotextiles from Outdoor Exposure
  • D5971/D5971M – 16 Practice for Sampling Freshly Mixed Controlled Low-Strength Material
  • D5972 – 16 Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
  • D5973 – 97(2017) Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
  • D5974 – 20 Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography
  • D5975 – 17 Test Method for Determining the Stability of Compost by Measuring Oxygen Consumption
  • D5977 – 15 Specification for High Load Rotational Spherical Bearings for Bridges and Structures
  • D5978/D5978M – 16 Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells
  • D5979 – 96(2019)e1 Guide for Conceptualization and Characterization of Groundwater Systems
  • D5980 – 16 Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring
  • D5981/D5981M – 18 Guide for Calibrating a Groundwater Flow Model Application
  • D5982 – 15 Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
  • D5983 – 18 Specification for Methyl Tertiary-Butyl Ether (MTBE) for Blending With Gasolines for Use as Automotive Spark-Ignition Engine Fuel
  • D5984 – 11(2017) Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
  • D5985 – 02(2020) Test Method for Pour Point of Petroleum Products (Rotational Method)
  • D5986 – 96(2019) Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
  • D5988 – 18 Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil
  • D5989 – 18 Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)
  • D5990 – 20a Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)
  • D5991 – 17 Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
  • D5992 – 96(2018) Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
  • D5993 – 18 Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners
  • D5994/D5994M – 10(2015)e1 Test Method for Measuring Core Thickness of Textured Geomembranes
  • D5995 – 18 Guide for Environmental Site Investigation in Cold Regions
  • D5996 – 16 Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
  • D5997 – 15 Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • D5998 – 16 Specification for Molded Polyethylene Shipping and Storage Drums
  • D6000/D6000M – 15e1 Guide for Presentation of Water-Level Information from Groundwater Sites[1]

See also

References

External links