Earth:Concord Gabbro-Syenite Complex
The Concord Gabbro-Syenite Complex is a paleozoic pluton located in North Carolina.
Formation and composition
The complex is mainly composed of gabbro and syenite and is of the Silurian-Devonian age.[1] The Concord Gabbro-Syenite Complex is a part of a larger suite of twenty plutons that form a chain extending almost 500 km, which lie within the Charlotte Metamorphic belt.[2] The complex is located in Cabarrus County in south central North Carolina. Many of the Concord plutons have minor quantities of syenite, which form horseshoe-shaped rings around the gabbro.[3] The Concord Gabbro-Syenite Complex within the Concord pluton is dated to 407 ± 36 Ma,[4] making it the oldest formation within the twenty plutons. It is thought unlikely that the plutons located within the Concord Suite formation spanned this much time, implying that complexes such as the Concord Gabbro-Syenite Complex most likely formed during an older Taconic igneous suite.[5]
Modeling
Magnetic modeling
Magnetic modeling suggests that there are large quantities of magnetite concentrated within the gabbro and the syenite.[2][5] Despite this, there is no petrologic evidence that would confirm the existence of magnetite within the complex. Three possible explanations have been put forward to explain the magnetization of the two intrusive rocks:[4]
- There was an induced part of the complex that parallels the present Earth field.[2][4]
- There was a remaining component whose direction depended on the magnetic field of the complex, which was a major component during the placement of the intrusive rocks.[2][4]
- There was possible re-magnetization due to tectonics.[4][5]
Gravitational modeling
Early gravitational modeling showed that there was a deep gravity source located within the Concord Gabbro-Syenite Complex.[2] It was initially attributed to the depth of the gabbro and syenite plutons within the complex. Subsequent gravitational modeling assumed that the gabbro had a higher density (circa 280 kg/m3) than the surrounding country rock[5] but made no assumptions regarding the density of the syenite.[4]
Petrology and geochemistry
The complex is made up of gabbro and syenite, but more specifically a olivine-plagioclase gabbro and clinopyroxene-plagioclase gabbro.[5]
Mineralogy of Gabbro
The gabbro located within the Concord complex is made up of medium-grained olivine-plagioclase and clinopyroxene-plagioclase gabbro consisting of a variety of minerals such as:[4]
- Plagioclase
- Olivine
- Clinopyroxene/orthopyroxene
- Amphibole
- Biotite
- Magnetite
Mineralogy of Syenite
The syenite located within the Concord complex is made up of coarse-grained phenocrysts of perthite that are surrounded by other various minerals such as:[4]
- Plagioclase
- Microcline
- Clinopyroxene
- Biotite
- Amphibole
- Quartz
Chemical composition
Oxide weight % | MnO | FeO1 | K2O | CaO | TiO2 | Na2O | MgO | Al2O3 | SiO2 | Total |
Gabbro | 0.14 | 9.73 | 0.31 | 10.47 | 1.20 | 2.51 | 9.59 | 17.59 | 46.9 | 98.44 |
Syenite | 00.19 | 3.95 | 4.41 | 2.26 | 1.05 | 7.45 | 1.27 | 17.10 | 60.8 | 98.48 |
Tectonic setting
It is thought that the meta-gabbros present throughout the Concord Gabbro-Syenite Complex were placed approximately 520-580 million years ago (in the Cambrian era) and that a subduction zone caused the igneous activity which created the meta-gabbros.[1] The crystallization of the gabbro and syenite is thought to have occurred 385-415 million years ago, placing its tectonic setting during the Siluro-Devonian era. During this era, the Charlotte and Carolina slate belts were believed to be connected to the North American Continent against the central Piedmont suture. The thrusting of the belts into the western terrain could have resulted in crustal thickening, melting, and mantle uplifting.[1][5]
References
- ↑ 1.0 1.1 1.2 McSween, H. Y.; Sando, T. W.; Clark, S. R.; Harden, J. T.; Strange, E. A. (1984-05-01). "The gabbro-metagabbro association of the Southern Appalachian Piedmont" (in en). American Journal of Science 284 (4–5): 437–461. doi:10.2475/ajs.284.4-5.437. ISSN 0002-9599. Bibcode: 1984AmJS..284..437M. http://www.ajsonline.org/cgi/doi/10.2475/ajs.284.4-5.437.[yes|permanent dead link|dead link}}]
- ↑ 2.0 2.1 2.2 2.3 2.4 Sinha, A. Krishna; Whalen, Joseph B.; Hogan, John P. (1997) (in en). Memoir 191: The Nature of Magmatism in the Appalachian Orogen. 191. Geological Society of America. doi:10.1130/mem191. ISBN 978-0-8137-1191-1. http://memoirs.gsapubs.org/content/191.
- ↑ Olsen, Barbara; Mcsween, Jr, Harry; Sando, Thomas (1983). "Petrogenesis of the Concord gabbusyenite complex, North Carolina". American Mineralogist 68: 315–333.
- ↑ 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 Williams, Richard T.; McSween, Harry Y. (1989-01-01). "Geometry of the Concord, North Carolina, intrusive complex: A synthesis of potential field modeling and petrologic data" (in en). Geology 17 (1): 42–45. doi:10.1130/0091-7613(1989)017<0042:GOTCNC>2.3.CO;2. ISSN 0091-7613. https://pubs.geoscienceworld.org/gsa/geology/article/17/1/42/204772/Geometry-of-the-Concord-North-Carolina-intrusive.
- ↑ 5.0 5.1 5.2 5.3 5.4 5.5 McSween, Harry Y. (1988), Neathery, Thornton L., ed., "The Concord gabbro-syenite complex, North Carolina" (in en), Southeastern Section of the Geological Society of America (Boulder, Colorado: Geological Society of America): pp. 231–233, doi:10.1130/0-8137-5406-2.231, ISBN 978-0-8137-5406-2, https://pubs.geoscienceworld.org/books/book/869/chapter/4861176/, retrieved 2021-03-29
Original source: https://en.wikipedia.org/wiki/Concord Gabbro-Syenite Complex.
Read more |