Software:Elastix

From HandWiki
Revision as of 11:59, 9 February 2024 by Rtextdoc (talk | contribs) (linkage)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Elastix
Isotipo-elastix
Developer3CX
OS familyLinux
Working stateCurrent
Source modelOpen source and Proprietary
|Final release|Latest release}}2.5 GPL (Stable), 5.0 Proprietary (Stable) / 11 February 2016; 8 years ago (2016-02-11)[1]
Kernel typeMonolithic (Linux)
LicenseGNU General Public License(2.5) Proprietary (5.0)
Official websitewww.elastix.org

Elastix is a unified communications server software that brings together IP PBX, email, IM, faxing and collaboration functionality. It has a Web interface and includes capabilities such as a call center software with predictive dialing.

The Elastix 2.5 functionality is based on open source projects including Asterisk, FreePBX, HylaFAX, Openfire and Postfix. Those packages offer the PBX, fax, instant messaging and email functions, respectively.

As of Elastix 5.0 all functionality is provided through 3CX, a software based private branch exchange (PBX) based on the SIP (Session Initiation Protocol) standard. It enables extensions to make calls via the public switched telephone network (PSTN) or via Voice over Internet Protocol (VoIP) services. Elastix 5.0 is an IP business phone system that supports standard SIP soft/hard phones, VoIP services and traditional PSTN phone lines.

Elastix 2.5 is free software, released under the GNU General Public License. Elastix 5.0 is Proprietary released under the terms of the 3CX license.

Support for telephony hardware

Elastix 2.5 has a good support for telephony hardware.[2] It includes drivers for the major manufacturers like Dinstar, OpenVox, Digium, Khomp, Sangoma Technologies Corporation, Rhino Equipment, Xorcom, and Yealink (zh).[3] The most of these drivers are supported through the zaptel project or modified versions of it. Other drivers are supported by the mISDN project and other projects.

Elastix 2.5 also supports other phone brands thanks to the SIP and IAX protocols that Asterisk implements. These protocols are based on public available standards. For this reason any manufacturer can build a product that supports them. Some certified manufacturers are Ascom, Snom and Yealink.

Call center module

Elastix 2.5 was the first distribution that included a call center module with a predictive dialer, released entirely as free software. This module can be installed from the same web-based Elastix interface through a module loader. The call center module can handle incoming and outgoing campaigns. It can also optionally be made more powerful by adding common third party modules like QueueMetrics[4] and WombatDialer.[5]

History of the project

Elastix was created and maintained by PaloSanto Solutions, an Open Source support company based in Ecuador. Elastix was released to the public for the first time in March 2006. It was not a complete distribution but a Web interface for CDR (Call Detail Records) reporting. It was not until late December 2006 that Elastix was released as a Linux distribution with Asterisk, Zaptel and a number of other packages which were easily administrated via a user friendly Web interface that caught the community's attention.

The Elastix 2.5 Linux distribution is based on CentOS, which has binary compatibility with Red Hat Enterprise Linux.

From its initial release until now the Elastix distro has grown in popularity. The project was nominated for two straight years (2007 and 2008) as finalist in the SourceForge Community Choice Awards.[6][7]

In 2016 the Elastix project was acquired by 3CX. With this acquisition the Elastix Distro versioned at 5.0 was switched to a proprietary software on top of Debian with the 3CX platform.[8][9] Open-source forks of pre-version 5 Elastix are being maintained by the Issabel project.

Similar software distributions

References

  1. "Elastix.org". http://www.elastix.org/en/changelog/. Retrieved June 21, 2016. 
  2. "Elastix.org". http://www.elastix.org/en/#top. Retrieved June 21, 2016. 
  3. "Elastix - Certified Hardware". Archived from the original on July 3, 2010. https://web.archive.org/web/20100703154910/http://www.elastix.org/product-information/certified-hardware.html. Retrieved June 21, 2016. 
  4. "Elastix Addons - QueueMetrics". http://www.elastix.com/en/portfolio-item/queuemetrics/. Retrieved October 12, 2016. 
  5. "Elastix Addons - WombatDialer". http://www.elastix.com/en/portfolio-item/wombat-dialer/. Retrieved October 12, 2016. 
  6. "SourceForge Community Blog | 2007 Community Choice Awards". Sourceforge.net. 2016-06-13. http://sourceforge.net/blog/cca07/. Retrieved 2016-06-21. 
  7. "2008 CCA: Finalists". Community Blog. Source forge. 2016-06-13. http://sourceforge.net/blog/cca08-finalists/. Retrieved 2016-06-21. 
  8. "Elastix 5 is Powered by 3CX". http://www.elastix.org/blog/elastix-5-powered-by-3cx/. Retrieved 7 December 2016. 
  9. Spehalski, Marc (2016-12-21). "RIP Elastix - Hello Renegade and FreePBX" (in en-US). https://www.voipsupply.com/blog/voip-insider/rip-elastix-hello-renegade-and-freepbx/. 
  10. "Sangoma and Digium Join Together FAQ". 2018-08-24. https://wiki.asterisk.org/wiki/display/AST/Sangoma+and+Digium+Join+Together+FAQ. Retrieved 2020-07-31. 
  11. "Four Linux distribution with Asterisk and FreePBX to set up a VoIP PBX". En.wikinoticia.com. 2012-05-30. http://en.wikinoticia.com/Technology/general-technology/118490-four-linux-distribution-with-asterisk-and-freepbx-to-set-up-a-voip-pbx. Retrieved 2016-06-21. 

External links