Template:Infobox airport/doc
![]() | This is a documentation subpage for Template:Infobox airport It may contain usage information, categories and other content that is not part of the original template page. |
![]() | This template is used on approximately 15,000 pages and changes may be widely noticed. Test changes in the template's /sandbox or /testcases subpages, or in your own user subpage. Consider discussing changes on the talk page before implementing them.
Transclusion count updated automatically (see documentation). |
![]() | This template uses Lua: |
![]() |
This template uses the Wikidata property:
|
Usage
The following blank template includes all of the available parameter names, except for repeating names used for runways and statistics. All parameters except name are optional; however, "IATA: none – ICAO: none", along with the heading "Summary", will always appear. Any unused parameters should be omitted, but can also be left blank if preferred. The use of flag icons with this infobox is discouraged.
{{Infobox airport | name = | ensign = | ensign_size = | ensign_alt = | nativename = | nativename-a = | nativename-r = | image = | image-width = <!-- if less than 200 --> | image_alt = | caption = | image2 = | image2-width = <!-- if less than 200 --> | image2_alt = | caption2 = | IATA = | ICAO = | FAA = | TC = | LID = | GPS = | WMO = | type = | owner-oper = | owner = | operator = | city-served = | location = | opened = <!-- {{start date|YYYY|MM|DD}} --> | closed = <!-- {{end date|YYYY|MM|DD}} --> | passenger_services_ceased = <!-- {{end date|YYYY|MM|DD}} --> | hub = | focus_city = | built = <!-- military airports --> | used = <!-- military airports --> | commander = <!-- military airports --> | occupants = <!-- military airports --> | timezone = | utc = | summer = | utcs = | elevation-f = | elevation-m = | metric-elev = | coordinates = <!-- {{coord}} --> | website = <!-- {{URL|example.com}} --> | image_map = | image_mapsize = | image_map_alt = | image_map_caption = | mapframe = | pushpin_map = | pushpin_mapsize = | pushpin_map_alt = | pushpin_map_caption = | pushpin_relief = | pushpin_image = | pushpin_label = | pushpin_label_position = | pushpin_mark = | pushpin_marksize = | r1-number = | r1-length-f = | r1-length-m = | r1-surface = <!-- up to r12 --> | metric-rwy = | h1-number = | h1-length-f = | h1-length-m = | h1-surface = <!-- up to h12 --> | stat1-header = | stat1-data = <!-- up to stat8 --> | stat-year = | footnotes = }} |
Parameters
All parameters except name are optional.
Airport name
These parameters specify the airport name which is displayed at the top of the infobox.
- name
- The name of the airport in English, such as Warsaw Chopin Airport or Beijing Capital International Airport.
- nativename
- Airport name in a native language using Western characters (French, German, Spanish, etc.), such as Lotnisko Chopina w Warszawie. In such cases the native name should be in italics, see Wikipedia:Manual of Style/Text formatting#Foreign terms. Can also be used for two different names in the same language (see Region of Waterloo International Airport).
- nativename-a
- Airport name in a native language with non-Western characters (Chinese, Japanese, Korean, Arabic, etc.), such as 北京首都国际机场.
- nativename-r
- Use in conjunction with above for Romanized name of the airport, such as Běijīng Shǒudū Guójì Jīcháng. In such cases the Romanized name should be in italics, see Wikipedia:Manual of Style/Text formatting#Foreign terms.
Airport image
These parameters specify an airport photograph or logo which is displayed below the title. A second image can also be displayed below the first image by using the parameter names ending with a "2".
- ensign
- Optional small ensign
- image / image2
- The name of image file, such as
Airport.png
orLogo.gif
(do not include theFile:
orImage:
prefix). - image_alt / image2_alt
- Alternative text for the images.
- image-width / image2-width
- The image width in pixels, i.e., 175 (defaults to 220 if not specified).
- This should only be used for smaller images which would appear distorted when expanded to a width of 220px.
- caption / caption2
- Text displayed beneath the image. If left blank or omitted, a caption will not be displayed.
- This should only be used for photographs that require an explanation; it should be omitted for airport logos and may be omitted for aerial photographs.
Airport codes
These parameters specify airport location identifiers which are displayed below the image (or below title if there is no image):
- IATA
- The airport's three character IATA location identifier. If omitted or left blank it will display as IATA: none.
- ICAO
- The airport's four character ICAO location identifier. If omitted or left blank it will display as ICAO: none.
- FAA
- The three or four character FAA location identifier for airports in the United States. If omitted or left blank, nothing is displayed.
- TC
- The three or four character Transport Canada location identifier for airports in Canada. If omitted or left blank, nothing is displayed.
- LID
- A location identifier for airports outside the US or Canada, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed.
- GPS
- A Global Positioning System code for the airport, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed.
- WMO
- The World Meteorological Organization five digit code for the weather station at the airport. If omitted or left blank, nothing is displayed.
Airport summary
These parameters specify airport details for the "Summary" section displayed below the airport codes.
- type
- Airport type should be one of the following: Public, Private, Military or Military/Public. Do not use Commercial, General or Civil.
- owner-oper
- If the airport is owned and operated by the same entity, use this in place of owner and operator.
- owner
- Name of the airport owner.
- operator
- Name of the airport operator, if not the owner.
- city-served
- If the airport is associated with a major city but actually located in a smaller town, list the major city here and the smaller town under location. This is not automatically linked, in order to allow multiple links if needed.
- Example:
city-served = Paris
- Result: Paris
- location
- Name of the town or city where the airport is located. Do not put the airport's street address in this field. This is not automatically linked, in order to allow multiple links if needed.
- Example:
location = [[Orly]], France
- Result: Orly, France
- opened
- The date when the airport originally opened for commercial service.
- Example:
{{start date|1989|09|22}}
- Result: September 22, 1989
- closed
- The date when the airport closed, either temporarily or permanently, along with reason for closing (for presently closed airports only). Use {{end date}}.
- passenger_services_ceased
- The date when passenger services to the airport ceased due to conversion of the airport for another use, along with the new use for the airport. Only for airports that previously had passenger services. Use {{end date}}.
- hub
- If the airport serves as a hub, list the airlines here. This is not automatically linked, in order to allow multiple links if needed. Use {{plainlist}} if the list is long.
- Example:
{{plainlist| * [[British Airways]] * [[EasyJet]] * [[Virgin Atlantic]] }} |
- Result:
- British Airways
- EasyJet
- Virgin Atlantic
- focus_city
- If the airport serves as a focus city, list the airlines here. See discussion at Wikipedia talk:WikiProject Airports#Focus Cities on pages.
- timezone and utc
- Will give the time zone that the airport is in, can be linked. A list can be found at List of time zones by country.
- Timezone is optional, but if it is used, then utc must be used as well, can be linked. A list can be found at List of UTC time offsets.
- summer and utcs
- If the time zone observes daylight saving time this will give the zone that the airport is in, can be linked. A list can be found at List of time zones by country.
- Summer is optional, but if it is used, then utcs must be used as well, can be linked. A list can be found at List of UTC time offsets.
- elevation-f
- Height above mean sea level, in feet.
- elevation-m
- Height above mean sea level, in metres.
- website
- External link to the airport's official website. See Wikipedia: External links#How to link for more information.
- Example:
website = {{URL|http://www.dfwairport.com/}}
- Result:
Military airports
These optional parameters provide additional information for military airports. The parameter names are based on those used in Template:Infobox military structure. This allows the display of information from that template, without the need to include an additional infobox. See example 4 below.
- built
- The date when the structure was built, usually given in years.
- used
- The period during which the structure was in active military use, usually given in years.
- commander
- The current commanding officer, for structures currently in military use.
- occupants
- Any notable military units which occupy the structure.
Geographic coordinates
This template allows for the insertion of geographic coordinates in two different ways: you can either provide a complete {{Coord}} template in the coordinates parameter, or you can provide the individual coordinate components (degrees, minutes, seconds, etc.) in the separate parameters described below. The latter method also allows you to insert a pushpin map with an automatically-placed airport icon and label (see below).
If you use both methods, then the coordinates parameter will be used in the infobox.
- coordinates
- Latitude and Longitude of airport, specified using the {{Coord}} template. When entering the coordinates always ensure that the resultant map or image shows the airport. It is very easy to confuse "N" for "S" or "E" for "W". If used as shown below, this will also cause the airport to appear in Google Earth's Geographic Web Layer.
- Example:
coordinates = {{Coord|49|27|16|N|002|06|46|E|type:airport_region:FR|display=inline,title}}
- Result: [ ⚑ ] 49°27′16″N 002°06′46″E / 49.45444°N 2.11278°E
Maps
This template provides three ways to include a map: as a simple image, or using interactive Mapframe maps, or using {{Location map}} (with the coordinate parameters described above to automatically place a pushpin mark and label on a map).
Image map
Am image map can be displayed by providing a value for image_map. The remaining image_ parameters are optional.
- image_map
- The name of an image to use as a map, such as
Airport_map.png
(do not include theFile:
orImage:
prefix).
- image_mapsize
- (optional) The width to display the image map, in pixels. Just the number, no "
px
". If omitted or left empty, defaults to 220.
- image_map_alt
- (optional) Alt text for the image map. If left blank or omitted, this defaults to same text used in
image_map_caption
(or Location of {{{name}}} if no caption).
- image_map_caption
- (optional) Caption to display below the image map. If left blank or omitted, a caption will not be displayed.
Mapframe maps
- Basic parameters:
- mapframe – Specify yes or no to show or hide the map, overriding the default. Default: no
- mapframe-caption – Caption for the map. Default: blank (or if
|mapframe-geomask=
is set, "Location in geomask's label") - mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a
{{maplink}}
template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified - mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
- mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g.
|coord=
. Default: coordinates from Wikidata{{Coord|12.34|N|56.78|E}}
- mapframe-wikidata – Set to
yes
to show shape/line features from the wikidata item, if any, when|coord=
is set. Default: not specified
- Customise which features are displayed:
- mapframe-shape – Turn off display of shape feature by setting to
none
. Use an inverse shape (geomask) instead of a regular shape by setting toinverse
. Default: not specified - mapframe-point – Turn off display of point feature by setting to
none
. Force point marker to be displayed by setting toon
. Default: not specified - mapframe-line – Turn off display of line feature by setting to
none
. Default: not specified - mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g.
P17
for (P17),P131
for (P131)). Default: airport - mapframe-switcher – set to
auto
orgeomasks
orzooms
to enable Template:Switcher-style switching between multiple mapframes. Default: not specifiedauto
– switch geomasks found in (P276) and (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.geomasks
– switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameterzooms
– switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of3
), "zoomed out" is1
, and "zoomed midway" is the average
- mapframe-shape – Turn off display of shape feature by setting to
- Other optional parameters:
- mapframe-frame-width or mapframe-width – Frame width. Default: 270
- mapframe-frame-height or mapframe-height – Frame height. Default: 200
- mapframe-shape-fill – Color used to fill shape features. Default: #606060
- mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
- mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
- mapframe-stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
- mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: airport
- Can also be set to
blank
to override any default marker symbol
- Can also be set to
- mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
- mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
- mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 2
- mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
- mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
- mapframe-zoom – Set the zoom level, from "1" to "18", to used if the zoom level cannot be determined automatically from object length or area. Default: 10
- mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified
- mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates
Location/pushpin map
A location map can be displayed by providing values for coordinates, and pushpin_map. The remaining pushpin_ parameters are optional.
- pushpin_map
- The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The
|coordinates=
parameter values position a pushpin mark and label on the map automatically.
- pushpin_mapsize
- (optional) The width to display the pushpin map, in pixels. Just the number, without "
px
". If omitted or left empty, defaults to 220.
- pushpin_map_alt
- (optional) Alt text for the pushpin map.
- pushpin_map_caption
- (optional) Caption to display below the pushpin map. If left blank or omitted, a caption will not be displayed.
- pushpin_relief
- (optional) Any non-blank value (yes, 1, etc.) will cause the template to display a relief map image, where available (see example 1). For additional information, see Template:Location map#Relief parameter.
- pushpin_image
- (optional) Name of an alternative map image, which must have the same edge coordinates as the location map template specified via pushpin_map (see example 5). Do not include the
File:
orImage:
prefix. For additional information, see Template:Location map#AlternativeMap parameter.
- pushpin_label
- (optional) The text of the label to place next to the pushpin mark (see example 1). The default is the value of the name parameter.
- pushpin_label_position
- (optional) The position of the label on the pushpin map relative to the pushpin mark (see example 5). Valid values are
left
,right
,top
andbottom
. This defaults to eitherleft
orright
, depending on the coordinates of the marker and its position relative to the right border of the map image.
- pushpin_mark
- (optional) The name of an image to display as the pushpin mark (see example 5). The default is
File:Airplane silhouette.svg
().
- pushpin_marksize
- (optional) The size of the mark in pixels (see example 5). The default is 10. Do not include
px
, for example:pushpin_marksize = 8
, notpushpin_marksize = 8px
.
Infobox control
These parameters control how certain fields within the infobox are displayed.
- metric-elev
- Set to any value to display elevation in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first. This can be seen in example 1.
- metric-rwy
- Set to any value to display runway length in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first. Examples 1 and 2 below show the runway length with metres first; example 3 and 4 show it with feet before metres.
Runways
These parameters specify details for each runway in the "Runways" section displayed below the summary. This can also be used to specify water landing areas for seaplanes (see Fairbanks International Airport). Parameters start with r1- for the first runway, r2- for the second runway, up to r8- for the eighth runway (if more are needed, leave a message on the talk page). Each airport should have at least one runway.
- rn-number (r1-number, r2-number, ...)
- The designation of the runway, normally two numbers like this → 02/20, 1st number is 18 lower than the 2nd. Where there are parallel runways an additional letter is added to each number, for example "L" for left, "R" for right and "C" for center. In certain cases a runway will only have one number when it can only be used in one direction. For airports in the United States the leading zero is not used and the designation should read 2/20.
- rn-length-f (r1-length-f, r2-length-f, ...)
- Runway length in feet.
- rn-length-m (r1-length-m, r2-length-m, ...)
- Runway length in metres.
- rn-surface (r1-surface, r2-surface, ...)
- Runway surface type, such as: Concrete, Asphalt, Gravel, Grass (or Turf), Dirt, Water, etc. Avoid the generic type "Paved" if possible.
Helipads
These parameters specify details for each helipad in the "Helipads" section displayed below the runways. Parameters start with h1- for the first helipad, h2- for the second helipad, up to h12- for the twelfth helipad (if more are needed, leave a message on the talk page). This section is optional and only appears if the h1- parameters are specified. See example 1 and example 3 below.
- hn-number(h1-number, h2-number, ...)
- The designation of the helipad. In the United States this is usually the letter "H" followed by a number, i.e. "H1", "H2", etc.
- hn-length-f (h1-length-f, h2-length-f, ...)
- Helipad length in feet.
- hn-length-m (h1-length-m, h2-length-m, ...)
- Helipad length in metres.
- hn-surface (h1-surface, h2-surface, ...)
- Helipad surface type, such as: Concrete, Asphalt, etc. Avoid the generic type "Paved" if possible.
Statistics
These parameters specify details for an optional "Statistics" section displayed below the runways and helipads. Parameters start with stat1- for the first statistic, stat2- for the second statistic, etc. This section only appears if the stat1- parameters are specified. See example 1 and example 3 below.
- statn-header (stat1-header, stat2-header, ...)
- A brief description of each statistic, such as Passengers or Aircraft operations.
- statn-data (stat1-data, stat2-data, ...)
- The data associated with the corresponding header.
- stat-year
- The calendar year for the statistics. This is displayed in parentheses after the word "Statistics" in the section header.
Footnotes
This parameter contains text for footnotes displayed at the bottom of the infobox.
- footnotes
- The most common use for this field is to give sources or references for the data displayed in the infobox. See the examples below.
Examples
Example 1
Warsaw Chopin Airport Lotnisko Chopina w Warszawie Warszawa/Okęcie Airport | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Summary | |||||||||||||||
Airport type | Public / Military | ||||||||||||||
Operator | Polish Airports State Enterprise (PPL) | ||||||||||||||
Serves | Warsaw | ||||||||||||||
Location | Warsaw (Okęcie), Poland | ||||||||||||||
Opened | 29 April 1934 | ||||||||||||||
Hub for | |||||||||||||||
Elevation AMSL | 110 m / 362 ft | ||||||||||||||
Coordinates | [ ⚑ ] 52°09′57″N 20°58′02″E / 52.16583°N 20.96722°E | ||||||||||||||
Website | www.lotnisko-chopina.pl | ||||||||||||||
Map | |||||||||||||||
Runways | |||||||||||||||
| |||||||||||||||
Helipads | |||||||||||||||
| |||||||||||||||
Statistics (2012) | |||||||||||||||
| |||||||||||||||
This example shows the appearance of the infobox without an image.
It also shows the use of the parameters for latitude, longitude, and location/pushpin map.
Note: helipad information added to illustrate function of metric-rwy
parameter.
{{Infobox airport | name = Warsaw Chopin Airport | nativename = ''Lotnisko Chopina w Warszawie'' | nativename-r = Warszawa/Okęcie Airport | image = <!--leave blank, this is demo without image--> | IATA = WAW | ICAO = EPWA | type = Public / Military | operator = Polish Airports State Enterprise (PPL) | city-served = [[Warsaw]] | location = [[Warsaw]] ([[Okęcie]]), Poland | hub = {{plainlist| *[[Bingo Airways]] *[[Enter Air]] *[[Eurolot]] *[[LOT Polish Airlines]] *[[Small Planet Airlines]] *[[SprintAir]] *[[Wizz Air]] }} | metric-elev = yes | elevation-m = 110 | elevation-f = 362 | website = {{URL|1=http://www.lotnisko-chopina.pl/en/passenger|2=www.lotnisko-chopina.pl}} | opened = {{Start date|1934|04|29|df=yes}} | coordinates = {{coord|52|09|57|N|20|58|02|E|display=inline<!--- set here to prevent coordinates from appearing in the title of the template page --->}} | pushpin_map = Poland | pushpin_map_caption = Location of airport in Poland | pushpin_relief = yes | pushpin_label = WAW | metric-rwy = yes | r1-number = 11/29 | r1-length-m = 2,800 | r1-length-f = 9,186 | r1-surface = [[Asphalt]] | r2-number = 15/33 | r2-length-f = 12,106 | r2-length-m = 3,689 | r2-surface = Asphalt | h1-number = H1 | h1-length-m = 40 | h1-length-f = 131 | h1-surface = [[Concrete]] | stat-year = 2012 | stat1-header = Passengers | stat1-data = 9,587,842 | stat2-header = Movements | stat2-data = 118,320 | footnotes = Statistics: Warsaw Chopin Airport<ref name="stats2013">{{cite web|title=About the Airport: Statistics|url=http://www.lotnisko-chopina.pl/en/airport/about-the-airport/statistics|publisher=Warsaw Chopin Airport|accessdate=28 September 2013}}</ref><br/>Sources: Polish [[Aeronautical Information Publication|AIP]] at [[Eurocontrol]]<ref>{{cite web|url=http://www.ead.eurocontrol.int/publicuser/protect/pu/main.jsp |title=EAD Basic |publisher=Ead.eurocontrol.int |accessdate=2012-06-28}}</ref> }}
Example 2
Beijing Capital International Airport 北京首都国际机场 Běijīng Shǒudū Guójì Jīcháng | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() Beijing Capital Departure Hall | |||||||||||||||
Summary | |||||||||||||||
Airport type | Public | ||||||||||||||
Operator | Civil Aviation Administration of China | ||||||||||||||
Serves | Beijing | ||||||||||||||
Location | Chaoyang District, Beijing | ||||||||||||||
Opened | March 2, 1958 | ||||||||||||||
Hub for | Air China, China Southern Airlines | ||||||||||||||
Elevation AMSL | 116 ft / 35 m | ||||||||||||||
Coordinates | [ ⚑ ] 40°04′48″N 116°35′04″E / 40.08°N 116.58444°E | ||||||||||||||
Website | www.bcia.com.cn | ||||||||||||||
Runways | |||||||||||||||
|
Beijing Capital International Airport
This example shows the appearance of the infobox with an image and a caption.
It also uses both the nativename-a
and nativename-r
parameters.
{{Infobox airport | name = Beijing Capital International Airport | nativename-a = 北京首都国际机场 | nativename-r = Běijīng Shǒudū Guójì Jīcháng | image = Beijing Capital Departure Hall.jpg | caption = Beijing Capital Departure Hall | IATA = PEK | ICAO = ZBAA | type = Public | operator = [[Civil Aviation Administration of China]] | city-served = [[Beijing]] | location = [[Chaoyang District, Beijing]] | hub = [[Air China]], [[China Southern Airlines]] | elevation-f = 116 | elevation-m = 35 | coordinates = {{Coord|40|04|48|N|116|35|04|E|type:airport_region:CN|display=inline,title|name=Beijing Capital International Airport}} | website = {{URL|1=http://en.bcia.com.cn/|2=www.bcia.com.cn}} | opened = {{Start date|1958|03|02|mf=yes}} | metric-rwy = yes | r1-number = 18L/36R | r1-length-m = 3,800 | r1-length-f = 12,467 | r1-surface = [[Asphalt]] | r2-number = 18R/36L | r2-length-m = 3,200 | r2-length-f = 10,499 | r2-surface = Asphalt }}
Example 3
Dallas/Fort Worth International Airport | |||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | |||||||||||||||||||||||||||||||||||
Summary | |||||||||||||||||||||||||||||||||||
Airport type | Public | ||||||||||||||||||||||||||||||||||
Owner | City of Dallas City of Fort Worth | ||||||||||||||||||||||||||||||||||
Operator | DFW Airport Board | ||||||||||||||||||||||||||||||||||
Serves | Dallas–Fort Worth | ||||||||||||||||||||||||||||||||||
Opened | January 13, 1974 | ||||||||||||||||||||||||||||||||||
Hub for | American Airlines, Envoy Air | ||||||||||||||||||||||||||||||||||
Elevation AMSL | 607 ft / 185 m | ||||||||||||||||||||||||||||||||||
Coordinates | [ ⚑ ] 32°53′49″N 097°02′17″W / 32.89694°N 97.03806°W | ||||||||||||||||||||||||||||||||||
Website | www | ||||||||||||||||||||||||||||||||||
Map | |||||||||||||||||||||||||||||||||||
Runways | |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
Helipads | |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
Statistics (2005) | |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
Dallas-Fort Worth International Airport
{{Infobox airport | name = Dallas-Fort Worth International Airport | image = Dfw_airport.jpg | IATA = DFW | ICAO = KDFW | FAA = DFW | type = Public | owner = City of [[Dallas, Texas|Dallas]] City of [[Fort Worth, Texas|Fort Worth]] | operator = DFW Airport Board | city-served = [[Dallas/Fort Worth Metroplex|Dallas/Fort Worth]] | hub = [[American Airlines]], [[American Eagle Airlines]] | metric-elev = | elevation-f = 607 | elevation-m = 185 | website = {{URL|http://www.dfwairport.com/}} | opened = {{Start date|1974|01|13|mf=yes}} | coordinates = {{coord|32|53|49|N|097|02|17|W|display=inline<!--- set here to prevent coordinates from appearing in the title of the template page --->}} | pushpin_map = USA Texas | pushpin_map_caption = Location within Texas | pushpin_label = DFW | metric-rwy = | r1-number = 13L/31R | r1-length-f = 9,000 | r1-length-m = 2,743 | r1-surface = [[Concrete]] | r2-number = 13R/31L | r2-length-f = 9,301 | r2-length-m = 2,835 | r2-surface = Concrete | r3-number = 17C/35C | r3-length-f = 13,401 | r3-length-m = 4,085 | r3-surface = Concrete | r4-number = 17L/35R | r4-length-f = 8,500 | r4-length-m = 2,591 | r4-surface = Concrete | r5-number = 17R/35L | r5-length-f = 13,401 | r5-length-m = 4,085 | r5-surface = Concrete | r6-number = 18L/36R | r6-length-f = 13,400 | r6-length-m = 4,084 | r6-surface = Concrete | r7-number = 18R/36L | r7-length-f = 13,400 | r7-length-m = 4,084 | r7-surface = Concrete | h1-number = H1 | h1-length-f = 158 | h1-length-m = 48 | h1-surface = Concrete | stat-year = 2005 | stat1-header = Passengers | stat1-data = 59,176,265 | stat2-header = Aircraft operations | stat2-data = 711,878 | stat3-header = Metric tonnes of cargo | stat3-data = 741,432 | footnotes = Sources: FAA<ref>{{FAA-airport|ID=DFW|use=PU|own=PU|site=23710.6*A}}</ref>, airport website<ref>[http://www.dfwairport.com/ Dallas-Fort Worth International Airport], official web site</ref>. }}
Example 4
Wright–Patterson Air Force Base ![]() | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | |||||||||||||||
Summary | |||||||||||||||
Airport type | Military: Air Force Base | ||||||||||||||
Operator | United States Air Force | ||||||||||||||
Location | Dayton, Ohio | ||||||||||||||
In use | 1948 – present | ||||||||||||||
Commander |
| ||||||||||||||
Elevation AMSL | 823 ft / 251 m | ||||||||||||||
Coordinates | [ ⚑ ] 39°49′34″N 084°02′54″W / 39.82611°N 84.04833°W | ||||||||||||||
Website | www | ||||||||||||||
Map | |||||||||||||||
Runways | |||||||||||||||
| |||||||||||||||
Wright–Patterson Air Force Base
This infobox shows the use of an image and linked text over the blue background in title area. It also makes use of some of the fields used for military airports.
{{Infobox airport | name = Wright–Patterson Air Force Base | ensign = [[File:Air Force Materiel Command.png|100px]] | nativename = {{smaller|[[Air Force Materiel Command|{{black|Air Force Materiel Command}}]]}} | image = National Museum of the United States Air Force.jpg | image-width = 250 | caption = [[National Museum of the United States Air Force]] | IATA = FFO | ICAO = KFFO | FAA = FFO | type = Military: [[Air Force Base]] | operator = [[United States Air Force]] | location = [[Dayton, Ohio]] | built = <!--1948--> | used = 1948 – present | commander = <div> * Gen. Bruce Carlson – [[Air Force Materiel Command]] * Brig. Gen. Bruce E. Davis – [[445th Airlift Wing]] * Col. Colleen M. Ryan – [[88th Air Base Wing]] and Installation Commander </div> | occupants = | elevation-f = 823 | elevation-m = 251 | website = {{URL|http://www.wpafb.af.mil/}} | coordinates = {{coord|39|49|34|N|084|02|54|W|display=inline<!--- set here to prevent coordinates from appearing in the title of the template page --->}} | pushpin_map = USA Ohio | pushpin_map_caption = Location within Ohio | pushpin_label = Wright–Patterson AFB | r1-number = 5L/23R | r1-length-f = 12,601 | r1-length-m = 3,841 | r1-surface = [[Porous European Mix|PEM]] | r2-number = 5R/23L | r2-length-f = 7,000 | r2-length-m = 2,134 | r2-surface = [[Asphalt]] | footnotes = Sources: FAA<ref>{{FAA-airport|ID=FFO|use=PR|own=MA|site=17827.*A}}</ref>, official website<ref>[http://www.wpafb.af.mil/ Wright-Patterson Air Force Base] (official site)</ref>. }}
Example 5
Buri Ram Airport ท่าอากาศยานบุรีรัมย์ | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Summary | |||||||||||
Airport type | Public | ||||||||||
Serves | Buri Ram, Thailand | ||||||||||
Elevation AMSL | 590 ft / 180 m | ||||||||||
Coordinates | [ ⚑ ] 15°13′46″N 103°15′04″E / 15.22944°N 103.25111°E | ||||||||||
Map | |||||||||||
Runways | |||||||||||
| |||||||||||
This infobox shows the use optional parameters for the location/pushpin map.
{{Infobox airport | name = Buri Ram Airport | nativename-a = {{lang|th|ท่าอากาศยานบุรีรัมย์}} | IATA = BFV | ICAO = VTUO | type = Public | city-served = [[Buri Ram]], [[Thailand]] | elevation-f = 590 | coordinates = {{coord|15|13|46|N|103|15|04|E|display=inline<!--- set here to prevent coordinates from appearing in the title of the template page --->}} | pushpin_map = Thailand | pushpin_mapsize = 220x300 <!--limit height to 300px--> | pushpin_map_caption = Location of airport in Thailand | pushpin_image = Thailand location map Topographic.png | pushpin_label = <span style="color:yellow; font-weight:bold; font-size:larger; text-shadow: black 0.1em 0.1em 0.2em">BFV</span> | pushpin_label_position = bottom | pushpin_mark = Yellow_pog.svg | pushpin_marksize = 11 | metric-rwy = y | r1-number = 04/22 | r1-length-m = 2100 | r1-surface = Asphalt | footnotes = Source: [[Aeronautical Information Publication|AIP]] Thailand<ref name="AIP">{{cite web | url = http://www.aisthai.go.th/webais/pdf/AERONAUTICALCHARTS/VTUO.pdf | title = VTUO – BURI RAM | format = [[PDF]] | publisher = AIP Thailand | accessdate = 20 August 2012}}</ref> }}
References for examples
- ↑ "About the Airport: Statistics". Warsaw Chopin Airport. http://www.lotnisko-chopina.pl/en/airport/about-the-airport/statistics. Retrieved 28 September 2013.
- ↑ "EAD Basic". Ead.eurocontrol.int. http://www.ead.eurocontrol.int/publicuser/protect/pu/main.jsp. Retrieved 2012-06-28.
- ↑ FAA Airport Form 5010 for DFW PDF
- ↑ Dallas-Fort Worth International Airport, official web site
- ↑ FAA Airport Form 5010 for FFO PDF
- ↑ Wright-Patterson Air Force Base (official site)
- ↑ "VTUO – BURI RAM" (PDF). AIP Thailand. http://www.aisthai.go.th/webais/pdf/AERONAUTICALCHARTS/VTUO.pdf. Retrieved 20 August 2012.
TemplateData
TemplateData documentation used by VisualEditor and other tools
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Click here to see a monthly parameter usage report for this template in articles based on this TemplateData.
TemplateData for Infobox airport No description.
|
Microformat
The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
Sub-templates
If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.
If it has a URL, use {{URL}}.
Please do not remove instances of these sub-templates.
Classes
hCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- uid
- url
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes nor collapse nested elements which use them.
Precision
When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name=
parameter.