Engineering:Spreader patch
From HandWiki
Revision as of 04:22, 31 May 2021 by imported>MainAI5 (simplify)
A spreader patch is a fabric reinforcement at a point on a sail where it is likely to rub with the spreader on a mast.
Use and construction
Spreader patches may be placed on a jib,[1] when it overlaps with the mast, or on the mainsail,[2] where it may interfere when furled, or when the sail is backwinded against the mast.[3] Patches may be made of tape, sticky-backed Dacron, or other material that is compatible with the type of sailcloth being reinforced.[4] When applying such patches, it's important to affix it starting from the inner part of the sail, towards the edge of the sail (leech).[5]
References
- ↑ Rousmaniere, John (2014-01-07) (in en). The Annapolis Book of Seamanship: Fourth Edition. Simon and Schuster. pp. 111. ISBN 9781451650242. https://books.google.com/books?id=7TVvAAAAQBAJ&q=spreader+patch&pg=PA111.
- ↑ Neal, Tom (January 1995) (in en). There's the rub. Newport, Rhode Island. pp. 25. https://books.google.com/books?id=cbA2Sw1wqGQC&q=spreader+patch&pg=RA7-PA25.
- ↑ Textor, Ken (1995) (in en). The New Book of Sail Trim. Sheridan House, Inc.. pp. 185. ISBN 9780924486814. https://books.google.com/books?id=2JIbS0c1XPwC&q=spreader+patch&pg=PA185.
- ↑ Leonard, Beth A. (September 2007) (in en). Sew it yourself. Newport, Rhode Island. pp. 140. https://books.google.com/books?id=inyYdZBU9v0C&q=spreader+patch&pg=PA141.
- ↑ Jasper, Aaron (December 1992) (in en). Sail repair and jury-rigging at sea. Newport, Rhode Island. pp. 75. https://books.google.com/books?id=xiWI0JXgtdIC&q=spreader+patch&pg=RA4-PA75.
 |  |
