Engineering:Daisy Model 25

From HandWiki
Revision as of 22:19, 1 February 2021 by imported>John Marlo (fixing)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Model 25
Place of originUnited States
Production history
DesignerCharles F. Lefever
ManufacturerDaisy
Unit cost$49.99 (MSRP)[1]
Produced1917–1978, 2007-present
No. built8 million
Specifications
Mass3 lb (1.4 kg) [1]
Length37 in (94 cm) [1]

Cartridge.177 cal. (4.5 mm) BB [1]
Calibre12 .177 cal. (4.5 mm) BB [1]
ActionPump action [1]
Muzzle velocity350 ft/s (110 m/s) [1]
Effective firing range195 yd (178 m) [1]
Feed systemspring-loaded
SightsIron sights

The Daisy Model 25 is a BB gun, modeled after a pump action shotgun with a trombone pump action mechanism. The Model 25 dominated the low price, higher performance airgun market for over 50 years (1914-1978) before discontinuation. They re-entered production in 2009.

The Model 25 was designed by Charles F. Lefever.[2] By some accounts, 15 million pieces were sold by 1957[3] and 20 million by 1980.[4] Other estimates are "over 8 million".[5]

Lever action models generally have very low velocities, around 275 ft/s (84 m/s), a result of the weak springs used to keep cocking efforts low for use by youths. The Daisy Model 25 pump-action BB gun typically achieved 350 ft/s (110 m/s).[6] However, the 25's capacity was only 50 BBs, in comparison to the 1000 BB capacity of some leverguns. The 25 does have an advantage in ammunition feeding, however, in that its feeding is spring-loaded, as opposed to many gravity-fed guns which require a shift in gun angle to reload a BB.

The re-issued version is made in China and has a muzzle velocity of approx 350 ft/s (110 m/s).

References