Engineering:Mortice Gauge
A mortise gauge is a woodworking tool used by a carpenter or joiner to scribe mortise and tenon joints on wood prior to cutting. Mortise gauges are commonly made of hardwood[1] with brass fittings.[2] Like the simpler marking gauge, a mortise gauge has a locking thumb screw slide for adjusting the distance of the scribe from the edge of the wood. It has two protruding pins, often called "spurs",[2] which are designed to scribe parallel lines marking both sides of a mortise at the same time.[3] One of the pins is adjustable, attached to a sliding fence,[4] so that mortises of different widths can be marked.[1]
Some mortise gauges are designed with one retractable spur, so that they can be used as marking gauges as well;[5] however, because the mortise gauge is an expensive and high precision tool, many carpenters prefer to have a separate marking gauge for general use.[4]
For complex joints, some mortise gauges have a double-beam design which allows the gauge to be wrapped around a tool such as a chisel for extra accuracy.[6]
References
- ↑ 1.0 1.1 Woodwork: A Step-by-Step Photographic Guide to Successful Woodworking. DK Publishing. 19 April 2010. pp. 38–. ISBN 978-0-7566-7002-3. https://books.google.com/books?id=XAfm2RMxgL0C&pg=PA38.
- ↑ 2.0 2.1 The Mortise Gauge. Technology Student
- ↑ What is MORTISE GAUGE? definition of MORTISE GAUGE (Science Dictionary). The Science Dictionary
- ↑ 4.0 4.1 New Track Media (April 1998). American Woodworker. New Track Media. pp. 47–. https://books.google.com/books?id=DfYDAAAAMBAJ&pg=PA47.
- ↑ A Short Guide to Mortise and Marking Gauges. Tools for Working Wood
- ↑ Jim Tolpin (2 July 2007). Measure Twice, Cut Once: Simple Steps to Measure, Scale, Draw and Make the Perfect Cut-Every Time.. Popular Woodworking Books. pp. 86–. ISBN 1-55870-809-X. https://books.google.com/books?id=V8L8y1J8YcgC&pg=PA86.