Engineering:Hitachi Hatsukaze

From HandWiki
Revision as of 21:25, 7 June 2022 by imported>Steve Marsio (simplify)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Hatsukaze
Hitachi Hatsukaze NASM.jpg
Hitachi Hatsukaze at the National Air and Space Museum
Type Four-cylinder air-cooled inverted Inline piston engine
National origin Japan
Manufacturer Hitachi
Major applications Kyushu K9W
Kokusai Ki-86
Number built 1,376
Developed from Hirth HM 504
Variants Ishikawajima Tsu-11

The Hitachi Hatsukaze (初風, Hatsukaze - fresh wind), also known as the Hitachi GK4 (short Navy), Hitachi Army Type 4 110hp Air Cooled Inline (Army long), Hitachi Ha47 (Army Hatzudoki) and Ha-11 model 11 (unified), was Hitachi's fourth design in a series of aircraft engines built in Japan prior to and during World War II. The original Hatsukaze was a license-built Hirth HM 504. Hatsukaze engines were air-cooled, four-cylinder, inverted inline engines developing around 82 kW (110 hp).[1]

Design and development

Hatsukaze engines were produced in very large numbers, as the powerplant for the license-built Bücker Bü 131 Jungmann variants that were the standard primary trainers for the Imperial Japanese Navy and Imperial Japanese Army.

The naval version of the engine was designated GK4, the army version as Ha47.

The Hatsukaze Model 12 was the power section linked to a compressor to create a primitive jet engine called a motorjet; the resulting Ishikawajima Tsu-11 was intended to power Yokosuka MXY7 Ohka Model 22 flying bombs. The standard Hatsukaze Model 11 engine was modified at a Navy arsenal by replacing the propeller drive shaft and engine front crankcase cover with a step-up gearbox. The gearbox increased engine output shaft RPM at a 1:3 ratio. At engine speed of 3,000 rpm, the compressor section was operating at 9,000 rpm. The compressed air was then ducted into a combustion chamber where a liquid fuel was sprayed and burnt. The heated compressed air then exits through the tailpipe providing static thrust of 180 kgf (397 lbf). It is likely that about 1/3 of the total thrust was contributed by adding the combustion chamber aft of the compressor.

The Tsu-11 was also selected to power the Yokosuka MXY9 Shuka ("Autumn Fire"), a trainer intended to prepare pilots for the Mitsubishi J8M rocket-powered interceptor. Neither of these aircraft entered service, however, as their development took place too late in the war.

Variants

GK4 Hatsukaze
license-built Hirth HM 504 inverted inline four-cylinder aviation engine.
GK4A Hatsukaze 11
IJNAS (Imperial Japanese Navy Air Service) version, 82 kW (110 hp) ; 339 built.[2]
Ha47 Model 11
(long designation Army Type 4 110hp Air Cooled Inline) IJAAS (Imperial Japanese Army Air Service) version, 82 kW (110 hp) ; 1,037 built.[2]
Hatsukaze Toku Model 13
("Toku" translates as "special") power section for the Ishikawajima Tsu 11 motorjet engine

Applications

  • Kyushu K9W1 Type 2 Momiji ("Cypress") license built Bücker Bü 131s.
  • Kokusai Ki-86 Type 4 ("Cypress") license built Bücker Bü 131s.

Specifications (Hatsukaze GK4A)

General characteristics

  • Type: 4-cylinder air-cooled inline piston engine
  • Bore: 110 mm (4.13 in)
  • Stroke: 125 mm (4.53 in)
  • Displacement: 4,752 cm3 (290 in3)
  • Length: 1,070 mm
  • Width: 200 mm
  • Dry weight: 115 kg

Components

  • Cooling system: Air-cooled

Performance

See also

Related development

Related lists

References

Notes

  1. Francillon p. 505.
  2. 2.0 2.1 Bridgeman

Bibliography

  • Bridgeman, Leonard. "The Bücker Bü 131B 'Jungmann'." Jane's Fighting Aircraft of World War II. London: Studio, 1946. ISBN:1-85170-493-0.
  • Francillon, R.J. Japanese Aircraft of the Pacific War. London, Putnam, 1970. ISBN:0-370-00033-1.
  • Goodwin, Mike; Starkings, Peter (2017). Japanese Aero-Engines 1910-1945. Sandomierz, Poland: MMPBooks. ISBN 978-83-65281-32-6. 
  • Jackson, Paul. Jane's All The World's Aircraft 2003–2004. Coulsdon, UK: Jane's Information Group, 2003. ISBN:0-7106-2537-5