Engineering:Evelyn 25
Development | |
---|---|
Designer | Bob Evelyn |
Location | United States |
Year | 1984 |
No. built | 6 |
Builder(s) | Formula Yachts |
Role | Racer-Cruiser |
Boat | |
Boat weight | 2,600 lb (1,179 kg) |
Draft | 4.40 ft (1.34 m) |
Hull | |
Type | monohull |
Construction | fiberglass |
LOA | 24.75 ft (7.54 m) |
LWL | 21.50 ft (6.55 m) |
Beam | 8.67 ft (2.64 m) |
Engine type | outboard motor |
Hull appendages | |
Keel/board type | fin keel |
Ballast | 1,100 lb (499 kg) |
Rudder(s) | internally-mounted spade-type rudder |
Rig | |
Rig type | Bermuda rig |
I (foretriangle height) | 31.50 ft (9.60 m) |
J (foretriangle base) | 10.60 ft (3.23 m) |
P (mainsail luff) | 27.00 ft (8.23 m) |
E (mainsail foot) | 9.50 ft (2.90 m) |
Sails | |
Sailplan | masthead sloop |
Mainsail area | 128.25 sq ft (11.915 m2) |
Jib/genoa area | 166.95 sq ft (15.510 m2) |
Total sail area | 295.20 sq ft (27.425 m2) |
Racing | |
PHRF | 147 |
The Evelyn 25 is an American trailerable sailboat that was designed by Bob Evelyn as a racer-cruiser and first built in 1984.[1][2][3]
Production
The design was built by Formula Yachts in Groton, Connecticut United States from 1984 to 1985, with six boats completed, but it is now out of production.[1][3][4]
Design
The Evelyn 25 is a recreational keelboat, built predominantly of fiberglass with a Divinycell core and with wood trim. It has a masthead sloop rig, a raked stem, a reverse transom, an internally mounted spade-type rudder controlled by a tiller and a fixed fin keel. It displaces 2,600 lb (1,179 kg) and carries 1,100 lb (499 kg) of lead ballast.[1][3]
The boat has a draft of 4.40 ft (1.34 m) with the standard keel.[1][3]
The boat is normally fitted with a small 3 to 6 hp (2 to 4 kW) outboard motor for docking and maneuvering.[3]
The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and two straight settee berths in the main cabin. A fold-down navigation station is provided. The head is fully enclosed. Cabin headroom is 54 in (140 cm).[1][3]
The design has a PHRF racing average handicap of 147 and a hull speed of 6.2 kn (11.5 km/h).[3]
Operational history
In a 2010 review Steve Henkel wrote, "this boat, built at designer-builder Bob Evelyn’s high-tech facility in Groton, CT, was meant to be light ... Her hull, laid up by hand, uses a Divinycell core, unidirectional fiberglass, and carbon-fiber stiffening ... Best features: Hardware is top quality, including a keel-stepped mast from Hall Spars, Harken ball-bearing traveler, and dual-speed winches. Worst features: In 1985 the management at Formula Yachts predicted that the boat's PHRF rating would turn out to be in 'the low 170s'. Even after more than a decade of race course performance, the boat's performance has been in the range of 147—perhaps testifying to the owners' passion for racing."[3]
See also
References
- ↑ 1.0 1.1 1.2 1.3 1.4 McArthur, Bruce (2020). "Evelyn 25 sailboat". sailboatdata.com. https://sailboatdata.com/sailboat/evelyn-25.
- ↑ McArthur, Bruce (2021). "Robert Evelyn". sailboatdata.com. https://sailboatdata.com/designer/evelyn-robert.
- ↑ 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Henkel, Steve: The Sailor's Book of Small Cruising Sailboats, page 379. International Marine/McGraw-Hill, 2010. ISBN:978-0-07-163652-0
- ↑ McArthur, Bruce (2021). "Formula Yachts (USA) 1979 - 1985". sailboatdata.com. https://sailboatdata.com/builder/formula-yachts-usa.
External links
Original source: https://en.wikipedia.org/wiki/Evelyn 25.
Read more |