Photoalignment
Photoalignment is a technique for orienting liquid crystals to desired alignment by exposure to polarized light and a photo reactive alignment chemical.[1] It is usually performed by exposing the alignment chemical ('command surface') to polarized light with desired orientation which then aligns the liquid crystal cells or domains to the exposed orientation. The advantages of photoalignment technique over conventional methods are non-contact high quality alignment, reversible alignment and micro-patterning of liquid crystal phases.
History
Photoalignment was first demonstrated in 1988 by K. Ichimura on Quartz substrates with an azobenzene compound acting as the command surface.[2] Since then several chemical combinations have been demonstrated for photoalignment and applied in production of liquid crystal devices like modern displays.[1][3]
Advantages
Traditionally, liquid crystals are aligned by rubbing electrodes on polymer covered glass substrates. Rubbing techniques are widely used in mass production of liquid crystal displays and small laboratories as well. Due to the mechanical contact during rubbing, often debris are formed resulting in impurities and damaged products. Also, static charge is generated by rubbing which can damage sensitive and increasingly miniature electronics in displays.[4]
Many of these problems can be addressed by photoalignment.
- Photoalignment is by definition a non-contact process. This allows alignment of liquid crystals even in mechanically inaccessible areas. This has immense implications in use of liquid crystals in telecommunications and organic electronics.[1]
- By optical imaging, very small domains can be aligned which results in extremely high quality alignments.
- By varying the orientation of liquid crystal alignment on a microscopic scale, thin film optical devices can be created like lens, polarizer, optical vortex generator, etc.[5][6]
References
- ↑ 1.0 1.1 1.2 Yaroshchuk, Oleg; Reznikov, Yuriy (2012). "Photoalignment of liquid crystals: basics and current trends" (in en). J. Mater. Chem. 22 (2): 286–300. doi:10.1039/c1jm13485j. ISSN 0959-9428. https://pubs.rsc.org/en/Content/ArticleLanding/2012/JM/C1JM13485J.
- ↑ Ichimura, Kunihiro; Suzuki, Yasuzo; Seki, Takahiro; Hosoki, Akira; Aoki, Koso (September 1988). "Reversible change in alignment mode of nematic liquid crystals regulated photochemically by command surfaces modified with an azobenzene monolayer" (in EN). Langmuir 4 (5): 1214–1216. doi:10.1021/la00083a030. ISSN 0743-7463. https://pubs.acs.org/doi/abs/10.1021/la00083a030.
- ↑ Murata, Mitsuhiro; Yokoyama, Ryoichi; Tanaka, Yoshiki; Hosokawa, Toshihiko; Ogura, Kenji; Yanagihara, Yasuhiro; Kusafuka, Kaoru; Matsumoto, Takuya (May 2018). "81-1: High Transmittance and High Contrast LCD for 3D Head-Up Displays" (in en). SID Symposium Digest of Technical Papers 49 (1): 1088–1091. doi:10.1002/sdtp.12126. ISSN 0097-966X. https://onlinelibrary.wiley.com/doi/abs/10.1002/sdtp.12126.
- ↑ Seki, Takahiro (2014-08-13). "New strategies and implications for the photoalignment of liquid crystalline polymers" (in En). Polymer Journal 46 (11): 751–768. doi:10.1038/pj.2014.68. ISSN 0032-3896. http://www.nature.com/articles/pj201468.
- ↑ Pan, Su; Ho, Jacob Y.; Chigrinov, Vladimir G.; Kwok, Hoi Sing (2018-02-14). "Novel Photoalignment Method Based on Low-Molecular-Weight Azobenzene Dyes and Its Application for High-Dichroic-Ratio Polarizers" (in en). ACS Applied Materials & Interfaces 10 (10): 9032–9037. doi:10.1021/acsami.8b00104. ISSN 1944-8244. https://pubs.acs.org/doi/10.1021/acsami.8b00104.
- ↑ Ji, Wei; Wei, Bing-Yan; Chen, Peng; Hu, Wei; Lu, Yan-Qing (2017-02-11). "Optical field control via liquid crystal photoalignment" (in en). Molecular Crystals and Liquid Crystals 644 (1): 3–11. doi:10.1080/15421406.2016.1277314. ISSN 1542-1406. https://www.tandfonline.com/action/captchaChallenge?redirectUri=%2Fdoi%2Ffull%2F10.1080%2F15421406.2016.1277314.
 |
