Company:David Clark Company
 | |
| Type | Private corporation |
|---|---|
| Industry | Electronics and textiles manufacturing |
| Founded | 1935 |
| Founder | David M. Clark |
| Headquarters | Worcester, Massachusetts , U.S. |
Key people | Richard M. Urella, President |
| Products | Communication headsets, protective clothing and equipment |
| $20 to $50 million (est.) | |
Number of employees | 300 (est., D&B) |
| Subsidiaries | Air-Lock, Inc. |
| Website | www |
David Clark Company, Inc. is an American manufacturing company. DCC designs and manufactures a wide variety of aerospace and industrial protective equipment, including pressure-space suit systems, anti-G suits, headsets, and several medical/safety products. DCC has been involved in the design and manufacture of air-space crew protective equipment since 1941, beginning with the design and development of the first standard anti-G suits and valves used by allied fighter pilots during World War II.[1]
Facilities
Located in Worcester, Massachusetts, the company was founded in 1935 by David M. Clark. It started in the textile business with the development of unique knitted materials for specialty undergarments and over time evolved to making aerospace and communications related products. The David Clark Company (DCC) is housed in a four-story building containing approximately 215,000 square feet (20,000 m2) of working area.
Signature products
.jpg)
Headsets
The company is best known for noise attenuating communication headset systems featuring boom microphones.
G-suits
The company has designed and manufactured pressure/space suits and life support systems for NASA and U.S. Air Force .[2] It developed partial pressure suits for NASA's Bell X-1 rocket-powered research aircraft in the 1940s, and full pressure suits for the D558-2 and North American X-15 research aircraft in the 1950s. DCC's X-15 suit design became the basis for all of its subsequent full pressure suits, including the space suits worn by astronauts for the first U.S. extravehicular activities (EVA) conducted during NASA's Project Gemini.[3] It also participated in team effort to develop the Integrated Life Support System for F-15 jet fighter and B-1 bomber crew.[2]
David Clark worked closely with the laboratory of Earl Wood at the Mayo Clinic when developing the early G-suit. The goal was to prevent blackout during high-G forces experienced during dive bombing maneuvers. With the physiologic principles of blackout during high G-forces worked out by Wood and colleagues,[4][5][6] the g-activated single pressure suit utilizing air bladders, first released in 1943 with improvements to follow in 1944, provided, what was considered to be a significant advantage for the allied forces. Of key importance was Wood and colleague's recognition that gravitationally induced loss of consciousness (GLOC) was due to relative loss of arterial pressure pushing blood to the head rather than a loss of venous return. Since 1946, DCC's continuous pressure suit research and development efforts, sponsored largely by the Department of Defense to support its United States Air Force high-altitude aircraft (Lockheed U-2 and SR-71) programs, resulted in the late 1980s development of a new generation pressure suit. The result was the S1034 Pilot's Protective Assembly (PPA). The S1034 PPA has since become the USAF and DoD standard pressure suit and served as the basis for NASA's S1035 Advanced Crew Escape Suit (ACES).[citation needed] This was adopted for the Space Shuttle program, replacing DCC's (partial pressure) S1032 Launch Entry Suit (LES). Both the S1034 PPA and S1035 ACES continue to be used by the USAF and NASA. Throughout the 1990s, DCC conducted Engineering Design and Development activities for the USAF Advanced Technology Anti-G Suit (ATAGS) program. This included the design and analysis of advanced ATAGS/Combat Edge vest designs for F-22 Raptor.
DCC designed and developed the Tactical Flyer's Ensemble (United States Patent 7,076,808). Research has also been conducted to develop the next generation of advanced pressure/space suit systems which will be required to satisfy emerging crewed space exploration requirements. This included the development of the S1035-X ("D-suit") in the late 1990s and the follow-on Enhanced Mobility ACES circa 2005. In 2008 DCC, along with its subsidiary, Air-Lock, Inc. of Milford, Connecticut, partnered with Houston, Texas-based Oceaneering Space Systems to develop the Constellation Space Suit System (CSSS) for use on the then-upcoming Constellation program. In 2010 they designed, developed and fabricated pressure suits utilized on the Red Bull Stratos project, with which Felix Baumgartner performed a record-breaking free fall from a high-altitude balloon on 14 October 2012.[7]
References
- ↑ Jenkins, Dennis R. (27 August 2012). Dressing for altitude : U.S. aviation pressure suits-- Wiley Post to space shuttle. United States. National Aeronautics and Space Administration.. Washington, D.C.. ISBN 9780160901102. OCLC 777364330. https://www.nasa.gov/pdf/683215main_DressingAltitude-ebook.pdf. Retrieved 10 June 2019.
- ↑ 2.0 2.1 Statement of Lt. Gen. Otto J. Glasser, Deputy Chief of Staff, Research and Development, Headquarters, U.S. Air Force, Department of Defense Appropriations for Fiscal Year 1972, pp. 706, 835.
- ↑ Dennis R. Jenkins, Dressing for Altitude: U.S. Aviation Pressure Suits—Wiley Post to Space Shuttle, NASA, NASA SP-2011-595, p. 270.
- ↑ Wood, E. H.; Lambert, E. H. (1946-01-01). "The effect of anti-blackout suits on blood pressure changes produced on the human centrifuge". Federation Proceedings 5 (1 Pt 2): 115. ISSN 0014-9446. PMID 21066536.
- ↑ Lambert, E. H.; Wood, E. H. (1946-07-01). "The problem of blackout and unconsciousness in aviators". The Medical Clinics of North America 30 (4): 833–844. doi:10.1016/s0025-7125(16)35922-3. ISSN 0025-7125. PMID 20992942.
- ↑ Wood, E. H.; Lambert, E. H. (1946-09-01). "Effects of acceleration in relation to aviation". Federation Proceedings 5: 327–344. ISSN 0014-9446. PMID 20999477.
- ↑ Red Bull Stratos Project
External links
 |  |
