Company:Kuwait Space Rocket
 | |
| Type | Research group |
|---|---|
| Industry | Aerospace |
| Founded | January 2018 |
| Founder | Naser Ashknani |
Key people | Sulieman Alfuhaid, Fahad Al-Fahad |
| Members | 3 |
| Website | www |
The Kuwait Space Rocket (KSR), is a Kuwaiti project to build and launch the first suborbital liquid bi-propellant rocket in Arabia.[1] The project is intended to be the first step towards starting a space industry in the country and a launch service provider in the GCC region. The project is divided into two phases with two separate vehicles. An initial testing phase with KSR-1 as a test vehicle capable of reaching an altitude of 8 km (5.0 mi) and a more expansive suborbital test phase with the KSR-2 planned to fly to an altitude of 100 km (62 mi).[2] in May 16 Ambition-1 launched but had a malfunction with the parachute and crashed in free fall.
History
The project began in January 2018 for conceptual design and planning. The team started the fabrication of KSR-1 in early 2019, and as of January 2020, KSR-1 was fully built.[3]
KSR-1
KSR-1 is a vertically-launched single stage rocket. It uses a liquid bi-propellant rocket engine burning methanol as fuel and nitrous oxide as the oxidizer. KSR-1 is intended to be a test vehicle for the development of KSR-2, the goal of which is to reach space. As such, all the major components and technologies that are expected to be used in KSR-2 are present in KSR-1. The main components of KSR 1 are the engine—consisting of the injector, nozzle, and cooling jacket— with fuel and oxidizer tanks, a nitrogen gas tank, and various valves and pressure regulators.[4]
| Section | Mass (kg) |
|---|---|
| Dry mass | |
| Nitrous oxide mass | |
| Methanol mass | |
| Total propellant mass | |
| Total vehicle mass |
| Property | Value |
|---|---|
| Chamber pressure | 3100 kPa |
| Exit pressure | 94 kPa |
| Momentum thrust | 520.1 N |
| Nozzle exit velocity | 2213 m/s |
| Burn rate | 16.8 s |
| Oxidizer mass flow rate | 0.19 kg/s |
| Fuel mass flow rate | 0.047 kg/s |
KSR-1 Development Process
Engine Fabrication
The KSR-1 engine was built locally in Kuwait and it utilizes a pressure fed cycle. The engine utilizes the nitrous not only as an oxidizer but as a cooling agent, that flows around the nozzle and back into the injector again.[5]
Cold Flow Testing
The KSR team performed a cold flow testing in October 2019 to verify the engine's flow rate and plumbing.
Static Testing
KSR performed a static testing of the Injector in November 2019.
Structural Assembly
The KSR-1 was fully assembled and presented at the Kuwait Aviation Show 2020.[6]
KSR-2
KSR-2 is a planned liquid bi-propellant suborbital launch vehicle. It is the second installment of the KSR Rocket Family, composed of a single stage, fueled by nitrous oxide and methanol. KSR-2 will have a total length of 4 m, a diameter of 0.4 m and a total mass of 591 kg, its apogee will be around 100 km.
See also
References
- ↑ "Kuwaiti youth eager to put country on space exploration map". Kuwait News Agency (KUNA). 2018-09-24. https://www.kuna.net.kw/ArticleDetails.aspx?id=2747736&language=en.
- ↑ "ناصر أشكناني لـ"السياسة": صاروخ فضائي كويتي يضعنا في الدول المتقدمة" (in ar). Al Seyassah. http://al-seyassah.com/ناصر-أشكناني-لـالسياسة-صاروخ-فضائي-ك/.
- ↑ "بالفيديو الكويت تطلق أول صاروخ فضائي محلي الصنع بعد عامين" (in ar). Al-Anba. 2020-01-19. https://www.alanba.com.kw/ar/kuwait-news/946568/19-01-2020-بالفيديو-الكويت-تطلق-أول-صاروخ-فضائي-محلي-الصنع-بعد-عامين/.
- ↑ "Kuwait Rocket" (in en). https://www.kuwaitrocket.com/.
- ↑ Al-Hafez, Ahmed (28 December 2019). "شباب كويتيون يستعدون لإطلاق أول صاروخ فضائي" (in ar). Al Qabas. https://alqabas.com/watch/5738295-شباب-كويتيون-يستعدون-لإطلاق-أول-صاروخ-فضائي-فأين-دور-الحكومة.
- ↑ "News – Kuwait Aviation Show 2020" (in en-US). https://kuwaitaviationshow.com/news/.
 |  |
