Engineering:Cel-Fi

From HandWiki

Cel-Fi is a device, similar to a cellular repeater, designed to eliminate in-building dead zones and improve indoor mobile phone reception. Created by Nextivity, Inc., the Cel-Fi systems are designed with smart antenna technology to seek out the best available signal to maximize signal gain to phone users. The Cel-Fi consists of two wireless devices, a window unit and coverage unit, that work jointly to increase 3G and 4G mobile broadband connectivity throughout the building. The window unit receives the signal and relays it to the receiver, which converts it and amplifies it.

These units were trialed for a period of time in both the US and UK by T-Mobile and approved in UK by T-Mobile and Orange in 2011 and O2 in 2012.[1] Cel-Fi systems are comparable to cellular repeaters and femtocell technology. In October 2012 the Cel-Fi system was the first and only signal boosting device to be approved for use in Australia.[2][3]

Fully compliant under the February 2013 Safe Harbor 2 issued by the FCC: On February 20th 2013, the FCC released a Report & Order, thus establishing two Safe Harbors and defining the use of “network safe” consumer boosters on licensed spectrum. The Safe Harbors represent a compromise solution between Technology Manufacturers and Wireless Operators. It is widely considered a landmark decision which was many years in the making.

Cel-Fi has an LTE/4G/3G product. It was launched in September 2014.[citation needed]

References

  1. ↑ "Mobile Phone Signal Boosters » Cel-fi RS2 from Nextivity". 20 April 2012. http://www.cel-fi.co.uk/. 
  2. ↑ "Telstra offers signal boost - at a price". 6 July 2012. http://www.smh.com.au/business/telstra-offers-signal-boost--at-a-price-20120706-21l5f.html. 
  3. ↑ "Cel-Fi". https://www.signalbooster.com/collections/cel-fi. 

External links




Retrieved from "https://handwiki.org/wiki/index.php?title=Engineering:Cel-Fi&oldid=2443207"