Engineering:Compression point
 | You can help expand this article with text translated from the corresponding article in Deutsch. (May 2024) Click [show] for important translation instructions.
|
The compression point is a metric describing an aspect of electronic amplifiers. For example, the 1-dB compression point (sometimes notated as P1dB[1][2]) is the output power of the amplifier (for the signal of interest) at which it differs from an ideal linear amplifier by more than 1 dB. So a larger 1-dB compression point means that the amplifier can produce larger outputs (for the same amount of distortion).[3] It will often be quoted by manufacturers of amplifiers[4]..[5]
The compression point is sometimes used (interchangeably with the third-order intercept point) to define the upper limit of the dynamic range of an amplifier. A rule of thumb that holds for many linear radio-frequency amplifiers is that the 1 dB compression point point falls approximately 10 dB below the third-order intercept point.[citation needed]
References
- ↑ Frenzel, Lou (October 24, 2013). "What's The Difference Between The Third-Order Intercept And The 1-dB Compression Points?". https://www.electronicdesign.com/resources/whats-the-difference-between/article/21799714/whats-the-difference-between-the-third-order-intercept-and-the-1-db-compression-points.
- ↑ "1dB Compression Point (P1dB Point)". May 16, 2015. http://www.techplayon.com/1db-compression-point/.
- ↑ Rouphael, Tony J. (2009). "Transceiver System Analysis and Design Parameters". Signal Processing for Software-Defined Radio. pp. 161–198. doi:10.1016/B978-0-7506-8210-7.00006-0. ISBN 978-0-75-068210-7.
- ↑ "Product Documentation - NI". https://www.ni.com/docs/en-US/bundle/ni-rfsa/page/nirfsa/gain-compression-point.html.
- ↑ Rouphael, Tony J. (2014). "System Nonlinearity". Wireless Receiver Architectures and Design. pp. 179–261. doi:10.1016/B978-0-12-378640-1.00004-4. ISBN 978-0-12-378640-1.
 |  |
