Engineering:Hispano-Suiza HS.820

From HandWiki
HS.820
Flab 20 mm IMG 1523.JPG
Swiss HS.820 in the HS.666A configuration.
TypeAutocannon
Place of originSwiss
Specifications
Mass66 kg (146 lb) (without ammunition)
Length2,489 mm (98.0 in)
Barrel length1,727 mm (68.0 in)
Calibre20×139mm
ActionGas unlocked, delayed blowback
Rate of fire1000 round/min
Muzzle velocity1,050 m/s (3,400 ft/s)
Effective firing range1,500 m (4,900 ft) against aerial targets

The HS.820 was a 20 mm caliber autocannon developed by Hispano-Suiza primarily for aircraft use, but more widely used in a series of ground-based anti-aircraft guns. After Oerlikon purchased Hispano's armaments division in 1970, the HS.820 became the Oerlikon KAD, supplanting Oerlikon's own KAA and KAB weapons in the process.[1] A US-built model, the M139, saw some use on vehicles.

Development

thumb|An armored vehicle Schützenpanzer SPz 11-2 Kurz equipped with a gun HS.820

Developed in the post-World War II era, the HS.820 fired a 20×139 mm round developed from the Swiss 20×139 FMK (and FK 38) as a replacement for their earlier 20×110 mm design of the widely used HS.404. The new round was one of two post-WWII European 20 mm designs, the other being the 20×128 developed by Oerlikon for a similar role.[2] The HS.820's high 1100 m/s muzzle velocity and equally high 1000 round per minute firing rate made it a formidable weapon. Nevertheless, the rapid introduction of even higher performance revolver cannons meant the HS.820 was never as popular in aircraft role as the HS.404 had been.

The weapon was more widely used in a variety of mounts for the anti-aircraft role, especially in naval use. Hispano introduced a number of mountings with a variety of sighting systems, feeds and power traverse. The HS.639-B3 (later known as the GAI-CO1) was a single-gun mounting fed from a 75-round drum, a fairly serious limitation for a gun with such a high rate of fire. Variants included the HS.639-B4 (GAI-CO3) with a 50-round drum mounted on top of the weapon, and the HS.639-B5 (GAI-CO6) that used dual 75-round magazines for longer firing times. The HS 665 was a triple-mount variety using the same drum feeds. The HS.666A (GAI-DO1), developed in the mid-70s, featured two HS.820 with new 120-round box magazines mounted on a shared hydraulically powered platform which could be tied into an associated radar-guided fire-control system.[3]

After Oerlikon purchased Hispano-Suiza, they undertook a renaming exercise for all of their weapons. The HS.820 was then known as the KAD, meaning Kanone, A for 20 mm[lower-alpha 1] and D as the fourth model. Oerlikon's own 20×128 mm became the KAA in the electrically-fired version, and the KAB in the gas-operated version.

The United States produced a slightly modified version of the HS.820 as the M139. It saw use on a number of vehicles, including the US Army's M114 and the Marine Corps Amphibious Assault Vehicle and the ill-fated MICV-65 series of armored vehicles, including on a palletised mount in the cabin of a Bell UH-1 helicopter.[4]

The 20×139 mm round was also widely used in a variety of other weapons, including the Rheinmetall MK 20 Rh 202 and 20 mm modèle F2 gun.

Original Hispano-Suiza ammunition

  • UIA (HEI): Projectile weight 120 g, explosive filler 10 g
  • RIA (APHEI): Projectile weight 120 g, explosive filler 4.5 g
  • RINT (APHC): Projectile weight 111 g, tungsten carbide core weight 70 g

See also

Notes

  1. ↑ A for 20, B for 23 or 25, C for 30 and D for 35 mm.

References

  1. ↑ 20 x 139 round (Switzerland), Jane's Ammunition Handbook
  2. ↑ "An introduction to collecting 20 mm cannon cartridges" , Anthony Williams
  3. ↑ A Compendium of Armaments and Military Hardware, Christopher Chant, ISBN:0-7102-0720-4
  4. ↑ "Vietnam War" (in en). https://www.pinterest.co.uk/pin/318911217348815571/?lp=true. Retrieved 4 May 2018. 



Retrieved from "https://handwiki.org/wiki/index.php?title=Engineering:Hispano-Suiza_HS.820&oldid=3226856"