Engineering:Micro drive
Micro drive is a type of bicycle drivetrain, mostly BMX and MTB, that uses smaller than standard-sized sprockets.[1] The smallest rear sprocket that fits on a freehub body is an 10 or 11-tooth, but with the use of a cassette hub, sometimes called a micro drive rear hub, sprockets as small as 8 teeth may be used.[2]
Some examples of micro drive hubs are Shimano Microspline (12-speed, 10-teeth) and SRAM XD/XDR (11/12-speed, 9-teeth).
Reduced weight and increased ground clearance
The advantage of micro drive is that it means a smaller front sprocket, or chainring, can be used without affecting the gear ratio, providing better ground clearance.[1] For example, a bike using a 32-tooth chainring with a 16-tooth rear sprocket can switch to using an 18-tooth chainring and a 9-tooth sprocket, and still have a 2:1 ratio. Another advantage is the reduction in weight with the reduction in size of all the parts.[1]
Increased wear and costs
The disadvantage is increased stresses on the drive train, leading to increased wear and even premature failure. As the front and rear sprockets become smaller, the tension in the chain increases, and stretching and breaking can occur more easily. Designers can overcome these issues by choosing materials with higher yield strengths, however usually at higher costs.
References
- ↑ 1.0 1.1 1.2 "Suntour Components Catalog 1992: MD (Micro Drive Design)". The Bicycle Info Project. http://www.equusbicycle.com/bike/suntour/catalog92/pdf/Suntour1992%20-%200003.pdf. Retrieved 2011-08-18. "Smallest rings and gears: by reducing the diameter of the chainring bolt circle diameter on the crank arm, SUNTOUR is able to replace the standard 46/ 36/24 (or 48/28/28) with a compact 42/32/20 on the front chainrings."
- ↑ "Wheels / Hub Tech Help". Dan's Competition. http://www.danscomp.com/serve/faq/wheels_hubs_faqs.htm. Retrieved 2011-08-18. "Currently with a cassette hub you can run as small as an 8t cog."
 |  |
