Engineering:Quantum Fireball
 A Quantum Fireball EL 5.1 GB hard drive | |
| Connects to | Computer via one of:
|
|---|---|
| Design firm | Quantum Corporation |
| Introduced | 1995 |
| Discontinued | 2001 |
The Quantum Fireball was a brand of 3.5-inch hard disk drives made by Quantum Corporation from 1995 to 2001. The first models in the series were 5400 RPM and came in 0.54 and 1.08 GB capacities,[1] while the Quantum Fireball Plus was known for being Quantum's first 7200 RPM Integrated Drive Electronics (IDE) hard drive. There were sixteen different models of the Quantum Fireball, with the last being the LCT 20.
Models
Fireball (original)
This generation of Quantum Fireball drives was launched in mid-1995 and offered 0.54 and 1.08 GB capacities. In 1996, capacities were increased to 0.64 and 1.28 GB. They had one or two platters, an IDE or SCSI interface and a 5400 RPM spindle speed.
Fireball TM
Released in 1997, this series of drives was positioned as a low-end model. With a 4500 RPM spindle speed and sporting a new design, these drives were originally available in 1.08 and 2.1 GB capacities with up to two platters; later models were available in capacities of up to 3.8 GB with three platters.
Fireball ST
bottom view
x-ray view
In 1997, Quantum released the Fireball ST. Notable for its high performance as well as being the first hard drive with an ATA-4 interface (SCSI models were also available), this series of hard drives were available in 1.6, 2.1, 3.2, 4.3, 5.1 and 6.4 GB capacities, with one, two or four platters, and a 5400 RPM spindle speed.
Fireball SE
1998 saw the release of the Fireball SE. This series improved upon the Fireball ST by having higher platter capacities and data transfer rates, while having the same cache size, spindle speed and drive interface as the Fireball ST. These drives were available in ATA-4 and SCSI interfaces with capacities up to 8.4 GB with four platters. These were Quantum's last Fireball drives available with a SCSI interface.
Fireball EL
In 1998, the Fireball EL was the first Fireball drive with an ATA-5 interface. This model had the spiral-shaped breather hole on the top cover. It quadrupled the Fireball SE's cache to 512 KB, while still having a 5400 RPM spindle speed. These drives were available in 2.5, 4.3, 5.1, 7.6 and 10.3 GB capacities with up to four platters.
Fireball EX
By the end of 1998, Quantum launched the Fireball EX. This series increased the platter capacities of the Fireball EL by about 25%; capacities of 3.2, 5.1, 6.4, 10.2 and 12.7 GB[2] with up to four platters were available. Aside from increased capacities, the specifications were the same as the Fireball EL.
Fireball CR
Launched in 1999, the Fireball CR series increased the platter capacities of the Fireball EL by about 33%; capacities of 4.3, 6.4, 8.4 and 12.7 GB with up to three platters were available. The cache, spindle speed and interface were the same as the Fireball EX.
Fireball CX
Launched in late 1999, the Fireball CX was Quantum's first hard drive with GMR heads. While having the same interface and spindle speed as the Fireball CR, the capacities available were 6.4, 8.4, 10.2, 13 and 20.4 GB with up to three platters. (Shipped with the iMac G3 in late 1999)
Fireball Plus models
Fireball Plus KA
The Fireball Plus KA, launched in 1999, was known for being Quantum's first 7200 RPM hard drive, while still having 512 KB of cache and an ATA-5 interface. It was available in 6.1, 9.4, 13.2 and 18.2 GB capacities with up to four platters.
Fireball Plus KX
Launched in 1999, this series increased the capacities of the KA to 6.4, 10.2, 13.6, 20.5 and 27.3 GB while still having up to four platters. It had the same cache, interface and spindle speed as the KA.
Fireball Plus LM
Launched in early 2000, this series increased the cache size to 2 MB while still having the ATA-5 interface. It was available in 10, 15, 20 and 30 GB capacities with up to three platters.
Fireball Plus AS
Launched later in 2000, this was Quantum's first hard drive to feature fluid dynamic bearings and an ATA-6 interface. It had a 2 MB cache [3] and was available in 10.2, 20, 30, 40 and 60 GB capacities with up to three platters.
Fireball LCT models
Quantum launched the LCT line in 1999. LCT stands for "low-cost technology."
LCT 8
Launched in late 1999, it had a 512 KB cache,[4] 5400 RPM spindle speed, and an ATA-5 interface. It was available in 4.3, 8.4, 13, 17.3 and 26 GB capacities with up to three platters.
LCT 10
Launched in early 2000, it had the same spindle speed, cache and interface as the LCT 8. Capacities available were 5.1, 10.2, 15, 20.4 and 30 GB with up to three platters. Some LCT 10 drives had a reliability issue: the circuit board had an integrated circuit that burned out, making the drive unusable.
LCT 15
In mid-2000, Quantum released the LCT 15. It lowered the spindle speed to 4400 RPM, but still had 512 KB of cache and an ATA-5 interface. Capacities available were 7.5, 15, 20.4 and 30 GB with up to two platters.
LCT 20
Launched later in 2000, this was the last Fireball LCT series. It had 128 KB of cache, an ATA-6 interface and a 4500 RPM spindle speed. Capacities available were 10, 20, 30 and 40 GB with up to two platters.
References
- ↑ 1 GB = 1 billion bytes
- ↑ "Archived copy". http://www.quantum.com/products/hdd/fireball_el_ex/specs.html.
- ↑ 1 MB = 10242 B (1 MiB)
- ↑ 1 KB = 1024 B (1 KiB)
External links
- redhill.net.au
- Quantum Fireball Plus KX
- Quantum Fireball Plus LM
- Quantum Fireball Plus AS
- Quantum Fireball LCT 20 Datasheet
 |
