Engineering:Six Chuter SR1
Please use PROD only on articles. It is proposed that this article be deleted because of the following concern:
If you can address this concern by improving, copyediting, sourcing, renaming, or merging the page, please edit this page and do so. You may remove this message if you improve the article or otherwise object to deletion for any reason. Although not required, you are encouraged to explain why you object to the deletion, either in your edit summary or on the talk page. If this template is removed, do not replace it. This message has remained in place for seven days, so the article may be deleted without further notice. Nominator: Please consider notifying the author/project: {{subst:proposed deletion notify|Engineering:Six Chuter SR1|concern=WP:DEL8: No sources of notability in article or available on the web. This article is a collection of facts from a directory as its only source. These uncontroversial deletions are not opposed by the original author after notification. Relevant: WP:NOTDIRECTORY and this AfD nomination.}} ~~~~Timestamp: 20260925234935 23:49, 25 September 2026 (UTC) Administrators: delete |
| SR1 | |
|---|---|
| General information | |
| Type | Powered parachute |
| National origin | United States |
| Manufacturer | Six Chuter |
The Six Chuter SR1 is an American powered parachute that was designed and produced by Six Chuter of Yakima, Washington.[1]
Design and development
The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). It features a parachute-style high-wing, single-place accommodation, tricycle landing gear and a single 52 hp (39 kW) Rotax 503 engine in pusher configuration. The 64 hp (48 kW) Rotax 582 engine was a factory option.[1]
The aircraft is built from a combination of aluminium and 4130 steel tubing. In flight steering is accomplished via foot pedals that actuate the canopy brakes, creating roll and yaw. On the ground the aircraft has lever-controlled nosewheel steering. The aircraft was factory supplied in the form of an assembly kit that requires 40 hours to complete.[1]
Specifications (SR1)
Data from Cliche[1]
General characteristics
- Crew: one
- Wing area: 450 sq ft (42 m2)
- Fuel capacity: 5 U.S. gallons (19 L; 4.2 imp gal)
- Powerplant: 1 × Rotax 503 twin cylinder, two-stroke, air-cooled aircraft engine, 50 hp (37 kW)
Performance
- Rate of climb: 500 ft/min (2.5 m/s)
References
 |  |
