Engineering:Superplastic forming and diffusion bonding
From HandWiki
Superplastic forming and diffusion bonding (SPF/DB) is a technique allowing the manufacture of complex-shaped hollow metallic parts. It combines Superplastic forming (SPF) with a second element "Diffusion Bonding" to create the completed structures.
Principle
Two metal sheets are welded together at their edges, then heated within the confines of a female mould tool.
When the part is hot, an inert gas is injected between the two sheets ; the part becomes hollow to the form of the mould.[1] Parts may be welded in other areas than the edges to give an internal structure as the sheets are blown.
Applications
- Hollow titanium blades for jet engines.[1]
- Military aircraft structures such the aft fuselage of the McDonnell Douglas F-15E Strike Eagle.[2] McDonnell Douglas (McDonnell Aircraft Company) developed the production equipment and tooling technology in St. Louis during the mid-1980s through the leadership of engineers Ray Kittelson, Vern Mueller, David Rohe and Duane Jennings.
See also
References
- ↑ 1.0 1.1 Spittle, Peter. "Gas turbine technology" p508, Rolls-Royce plc, 2003. Retrieved: 13 June 2014.
- ↑ Sabc. "Airframe in General". F-15E.info. http://www.f-15e.info/joomla/en/technology/airframe/60-airframe-in-general. Retrieved 2014-06-13.
 |  |
