Engineering:Tuyere

Short description: Tube, nozzle or pipe through which air is blown into a furnace

A tuyere, seen from inside a blast furnace.

An old tuyere in Nok, Nigeria.

A tuyere or tuyère (French pronunciation: ​[tɥijɛʁ]; English: /twiːˈjɛər/) is a tube, nozzle or pipe through which air is blown into a furnace or hearth.

Air or oxygen is injected into a hearth under pressure from bellows or a blowing engine or other devices. This causes the fire to be hotter in front of the blast than it would otherwise have been, enabling metals to be smelted or melted or made hot enough to be worked in a forge, though these are blown only with air. This applies to any process where a blast is delivered under pressure to make a fire hotter. Tuyeres have been discovered dating from the iron age; one example is dated at between 770BCE and 515BCE.

Following the introduction of hot blast, tuyeres are often water-cooled.

The term, like many technical terms relating to ironmaking, was introduced to England from French with the new technology of the blast furnace and finery forge in around 1500, and was sometimes anglicised as tue-iron or tue iron.

Examples

General arrangement of the Tuyere (2), Tuyere cooler (1), Tuyere-cooler holder (3), Blowpipe (4) and Bustle Pipe (9) in a Blast Furnace.

• A bloomery normally had one tuyere.
• Early blast furnaces also had one tuyere, but were fed from bellows perhaps 12 feet (3.7m) long operated by a waterwheel. During the Industrial Revolution, the blast began to be provided using steam engines, initially Watt engines working blowing cylinders. Improvements in foundry practice enabled gas-tight cast iron pipes to be produced, enabling one engine to deliver blast to several sides of a furnace, through multiple tuyeres.
• A finery forge contained finery and chafery hearths, usually one of the latter and one to three of the former. Each hearth was equipped with its own set of bellows, blowing into it through a tuyere.
• The blacksmith's hearth at their forge has a tuyere, often blown by foot-operated bellows.
• Tuyeres were also used in smelting lead and copper in smeltmills.
• As of 2009 the world's largest blast furnace in Caofeidan, China operated by Shougang Jing Tang United Iron and Steel Ltd had 42 tuyeres, through which the hot blast is injected in the furnace. They are usually made from copper and cooled with a water jacket to withstand the extreme temperatures.