Engineering:Underground rocket

From HandWiki

An underground rocket or rocket drill is a device for rapidly drilling holes through soil and rock of varying composition at rates up to 1 metre per second[1][2] by utilising supersonic jets of hot gases. It was developed by Russian engineer Mikhail Tsiferov in 1948.[3] Proposed uses for the device included drilling shallow holes for mineral exploration, construction, underground gasification of coal, water and methane drainage.[2]

The initial design called for an autonomous device equipped with a drill head that would be rotated by expanding gases generated by a propellant burning inside a combustion chamber, in a manner similar to a Segner wheel. As the hot gases escaped the slits in the drill head at high speeds, they would break down the ground in front of the device. Experiments have shown the device could achieve drilling speed of 5 metres per minute through solid rock and up to 100 metres per minute in soil.[4] In 1970, Soviet geologist Vladimir Smirnov said, the device "may well bring about a revolution in the facilities for penetrating the interior of the earth".[5][6] While a number of experimental prototypes were made and tested, the device has not seen production.

Prototype

Further development led to the first prototype, built in 1968. The device consisted of a cylindrical shell filled with solid propellant, with a number of de Laval nozzles installed in the nose cone. The rocket was positioned nose down and the propellant ignited; hot gases escaped through the nozzles at supersonic speeds. Nozzles aimed downwards were responsible for demolition of the ground underneath the rocket; the next series of nozzles, aimed sideways, expanded the drilled well. Gas escaped between the device's shell and the walls of the well at speeds of up to 100 m/s, carrying along chunks of pulverized rock up to 15 cm across. In the process, the gas significantly cooled down through contact with the shaft's walls.[7][8] Most of the energy contained in the propellant (5 to 100 thousand hp) was spent on the actual digging, while the device lowered itself deeper into the well under its own weight. Tsiferov's device was capable of drilling the well tens of metres deep and 250–1000 mm in diameter, depending on the type of soil. Experiments have demonstrated that the device is able to drill holes not only in regular soil, but through solid rock, permafrost, ice and aquifers.[8][9]

Fuels

Solid

The solid fuel version of the device was limited by the volume of propellant it could carry, which was sufficient for 5 to 20 seconds of operation, enough to create a well up to 20 metres deep. The inventor saw further progress in moving on to liquid fuel rockets, expecting their operational time to be measured in tens of minutes, with potential to be eventually increased to a few hours.[10]

Tsiferov's device was exhibited at VDNKh-USSR; the inventor was promoted to receive the exhibition's gold medal.[9] The device and drilling method were patented in a number of countries, including US (1975–1976[11][12]) and Canada (1977–1978[13][14]).

One of the disadvantages of the rocket drill was poor control, as the fluctuations in the ground composition along its way could severely affect its trajectory.[15] Eventually, a device to control the underground rocket's trajectory was patented.[9] In addition, an auxiliary device for collection of core samples was patented.[16]

Liquid

In 1980s, under the supervision of the original inventor's son, Vladimir Tsiferov, the liquid-fuel version of the underground rocket was developed, fueled by gasoline-water mixture and oxygen. The most notable feature of this design was its simplicity and ease of manufacturing; except for the drilling head with nozzles, it mostly used off-the-shelf parts. This rocket was capable of drilling a well 10 m deep and 1/2 m in diameter within one minute. According to Soviet geologist Lev Derbenev, this version of the rocket, "jet drilling device", weighs 17 times less [sic] than a comparable drilling rig, requires 3 times less [sic] fuel, and has 6 to 9 times greater productivity; a single device would provide cost savings of up to 42,000 roubles (53,000 US dollars) in 1984 prices.[17]

See also

References

  1. Highways & road construction 1973, p. 41.
  2. 2.0 2.1 Maurer 1980, p. 500.
  3. Жолондковский 1971, p. 19.
  4. Machinery Lloyd 1970, p. 59.
  5. Petroleum Press Service 1970, p. 267.
  6. Максимович 1984, p. 10.
  7. Грошев & Циферов 1978, p. 24.
  8. 8.0 8.1 Друянов 1980.
  9. 9.0 9.1 9.2 Максимович 1984, p. 11.
  10. Грошев & Циферов 1978, p. 25.
  11. "Method of sinking holes in Earth's surface" US patent 3917007, issued 1975-11-04
  12. "Apparatus for drilling holes in Earth's surface" US patent 3934659, issued 1976-01-27
  13. "Method of sinking holes in Earth's surface" CA patent 1004663, issued 1977-02-01
  14. "Apparatus for drilling holes in Earth's surface" CA patent 1023731, issued 1978-01-03
  15. Зигуненко 2006.
  16. Грошев & Циферов 1978, pp. 25, 35.
  17. Максимович 1984, p. 12.

Sources