Fault Tolerant Ethernet
From HandWiki
Short description: Networking technology
Communication protocol | |
Purpose | network protocol |
---|---|
Developer(s) | Honeywell |
Introduced | 2011 |
Fault Tolerant Ethernet (FTE) is proprietary protocol created by Honeywell. [1][2]
Designed to provide rapid network redundancy, on top of spanning tree protocol.[3] Each node is connected twice to a single LAN through the dual network interface controllers. The driver and the FTE enabled components allow network communication to occur over an alternate path when the primary path fails.[4][5]
Default time before failure is detected, is Diagnostic Interval (1000ms) multiplier with Disjoin Multiplier (3), for a 3000ms recovery time.
Similar to Switch Fault Tolerance (SFT) in windows and mode=1 (active-backup) in Linux.
Supported hardware and software
- Windows 7/2003 or newer
- Honeywell Control Firewall (CF9)
- Honeywell C300 Controller
- Honeywell Series 8 I/O
Technical overview
- Uses Multicast ( 234.5.6.7), for FTE community.
- Recommended maximum of 300 FTE nodes and 200 single connected Ethernet nodes (A machine with to network cards is considered as two separate single connected Ethernet nodes).
- Recommended to have separate broadcast/multicast domain , for different FTE communities.
- Recommended maximum of 3 tiers of switches.
- Default UDP Source Port: 47837
- Default UDP Destination Port : 51966
References
- ↑ "Fault Tolerant Ethernet". https://www.honeywellprocess.com/en-US/explore/products/control-monitoring-and-safety-systems/integrated-control-and-safety-systems/experion-pks/Pages/fault-tolerant-ethernet.aspx.
- ↑ "Technical Publications: Honeywell’s Fault Tolerant Ethernet Guide" (in en-US). https://process.honeywell.com/us/en/support/technical-publication.
- ↑ "Honeywell Fault Tolerant Ethernet and Control Firewall" (in en-US). 2021-04-23. https://theautomationblog.com/honeywell-fault-tolerant-ethernet-and-control-firewall/.
- ↑ "Experion PKS". https://www.honeywellprocess.com/en-US/explore/products/control-monitoring-and-safety-systems/integrated-control-and-safety-systems/experion-pks/pages/default.aspx.
- ↑ "Experion PKS". https://www.honeywellprocess.com/en-US/explore/products/control-monitoring-and-safety-systems/integrated-control-and-safety-systems/experion-pks/pages/default.aspx.
External links
- Honeywell Fault Tolerant Ethernet Page
- Jan Baranski; Marshall Crocker. "A Comprehensive Fault-Tolerant Ethernet-Based IP Network Design". https://isip.piconepress.com/publications/unpublished/journals/2003/ieee_comm/fault_tolerant/paper_v0.pdf.
Original source: https://en.wikipedia.org/wiki/Fault Tolerant Ethernet.
Read more |